The three-year monitoring of 18 elements in five edible mushroom species collected from an old orchard

Abstract

The content of Al, As, Be, Cd, Ca, Cr, Co, Cu, Fe, Pb, Li, Mg, Mn, Ni, Rb, Se, Sr, and Zn in fruiting bodies of edible mushrooms Calocybe gambosa, Entoloma clypeatum, Entoloma saepium, Xerocomellus chrysenteron, and Amanita rubescens growing in an orchard planted with fruit trees and situated close to a high-grown forest was studied during years 2016–2018. A. rubescens showed the highest potential of the element accumulation with bioconcentration factors of 48.5, 16.2, 7.80, 6.53, 1.75, and 1.68 obtained for Rb, Cd, Cu, Zn, Sr, and Mg, respectively. Both Entoloma species accumulated the elements similarly with bioconcentration factors >1.0 obtained for Rb, Cu, Cd, and Mg. Bioconcentration factors <0.05 were obtained for Al, Cr, Fe, and Pb in all studied species. The contents of beryllium (<0.1?mg/kg dry matter) were always the lowest among the studied elements. The contents of some elements of studied mushroom species significantly fluctuated over the years. Despite the fact that some studied elements (As, Be, Cd, Pb, Ni) are considerably toxic for humans, the pronounced effect on health is not expected if the studied mushroom species are consumed occasionally and do not represent the main component of the diet.     

Comparison of Evapotranspiration Simulation Performance by APEX Model in Dryland and Irrigated Cropping Systems

Accurate estimation of evapotranspiration (ET) is essential to improve water use efficiency of crop production systems managed under different water regimes. The Agricultural Policy/Environmental eXtender (APEX) model was used to simulate ET using four potential ET (ET_p) methods. The objectives were to determine sensitive ET parameters in dryland and irrigated cropping systems and compare ET simulation in the two systems using multiple performance criteria. Measured ET and crop yield data from lysimeter fields located in the United States Department of Agriculture‐Agricultural Research Service Bushland, Texas were used for evaluation. The number of sensitive parameters was higher for dryland (11–14) than irrigated cropping systems (6–8). Only four input parameters: soil evaporation plant cover factor, root growth soil strength, maximum rain intercept, and rain intercept coefficient were sensitive in both cropping systems. Overall, it is possible to find a set of robust parameter values to simulate ET accurately in APEX in both cropping systems using any ET_p method. However, more computation time is required for dryland than irrigated cropping system due to a relatively larger number of sensitive input parameters. When all inputs are available, the Penman–Monteith method takes the shortest computation time to obtain one model run with robust parameter values in both cropping systems. However, in areas with limited datasets, one can still obtain reasonable ET simulations using either Priestley–Taylor or Hargreaves. Editor's note : This paper is part of the featured series on Optimizing Ogallala Aquifer Water Use to Sustain Food Systems. See the February 2019 issue for the introduction and background to the series.     

Road traffic mortality in the Slovak Republic in 1996–2014

Objective: Road traffic mortality takes an enormous toll in every society. Transport safety interventions play a crucial role in improving the situation. In the period 1996–2014 several road safety measures, including a complex new road traffic law in 2009, were implemented in the Slovak Republic, introducing stricter conditions for road users.

The aim of this study is to describe and analyze the trends in road user mortality in the Slovak Republic in individual age groups by sex during the study period 1996–2014.

Methods: Data on overall mortality in the Slovak Republic for the period 1996–2014 were obtained from the Statistical Office of the Slovak Republic. Mortality rates were age-adjusted to the European standard population. Joinpoint regression was used to assess the statistical significance of change in time trends of calculated standardized mortality rates.

Results: Mortality rates of all types of road users as well as all age groups and both sexes in the Slovak Republic in the period 1996–2014 are decreasing. The male : female ratio decreased from 4:1 in 1996 to 2:1 in 2014. Motor vehicle users (other than motorcyclists) and pedestrians have the highest mortality rates among road user groups. Both of these groups show a significant decline in mortality rates over the study period. Within the age groups, people age 65 years and over have the highest mortality rates, followed by the age groups 25–64 and 15–24 years old.

Joinpoint regression confirmed a steady, significant decline in all mortality rates over the study period. A statistically significant decrease in mortality rates in the last years of the study period was observed in the age group 25–64 and in male motorcycle users.

Assessing the impact of the 2009 road traffic law, a drop was observed in the average standardized mortality rate of all road traffic users from 14.56 per 100,000 person years in the period 1996–2008 to 7.69 per 100,000 person years in the period 2009–2014. A similar drop in the average standardized mortality rate was observed in all individual road user groups.

Conclusions: The implementation of the new traffic regulations may have contributed significantly to the observed decrease in mortality rates of road users in the Slovak Republic. A significant decrease in mortality was observed in all population groups and in all groups of road users. The introduction of a new comprehensive road traffic law may have expedited the decrease of road fatalities, especially in the age group 25–64 years old. This type of evidence-based epidemiology data can be used for improved targeting of future public health measures for road traffic injury prevention.     

Application of chemometric analysis based on physicochemical and chromatographic data for the differentiation origin of plant protection products containing chlorpyrifos

The aim of this study was to investigate the similarities and dissimilarities between the pesticide samples in form of emulsifiable concentrates (EC) formulation containing chlorpyrifos as active ingredient coming from different sources (i.e., shops and wholesales) and also belonging to various series. The results obtained by the Headspace Gas Chromatography–Mass Spectrometry method and also some selected physicochemical properties of examined pesticides including pH, density, stability, active ingredient and water content in pesticides tested were compared using two chemometric methods. Applicability of simple cluster analysis and also principal component analysis of obtained data in differentiation of examined plant protection products coming from different sources was confirmed. It would be advantageous in the routine control of originality and also in the detection of counterfeit pesticides, respectively, among commercially available pesticides containing chlorpyrifos as an active ingredient.     

The relationship between metal composition,phenolic acid and flavonoid content in Imleria badia from non-polluted and polluted areas

ABSTRACT

The aim of this study was to determine the elemental composition, phenolic content and composition and antioxidant properties of Imleria badia (Fr.) Vizzini (former names Boletus badius (Fr.) Fr., and Xerocomus badius (Fr.) E.-J. Gilbert) fruiting bodies collected from sites with different levels of pollution. Imleria badia was relatively tolerant to soil contamination with toxic elements and was able to grow in As, Cd, Hg and Pb concentrations exceeding 15, 2.9, 0.4 and 77 mg kg^?1, respectively. The concentration of elements in soil was reflected in the element content in I. badia. The fruiting bodies from polluted sites exhibited significantly higher content of all the analyzed elements. Among 21 individual phenolic compounds only protocatechiuc and caffeic acids, and quercetin were determined in fruiting bodies of I. badia. The differences between the concentration of the quantified phenolic compounds and the total flavonoid content in fruiting bodies of I. badia from unpolluted and polluted sites were not significant. However, the greatest total phenolic content was found in fruiting bodies from the polluted areas. The antioxidative capacity of mushrooms collected from heavily polluted sites was lower than those growing in unpolluted areas. The concentrations of some metals in soil and fruiting soil were positively correlated with phenolic content and IC₅₀.     

Seasonal variability of polychlorinated biphenyls (PCBs) and polychlorinated diphenyl ethers (PBDEs) congener profiles in butter in Poland: Dietary risk evaluation

Various statistical methods have been employed to analyse in details seasonal diversification of polychlorinated biphenyl (PCB)/polybrominated diphenyl ether (PBDE) congener profiles found in butter fat. The variability of the PCB/PBDE congener profiles indicates the presence of various sources of the milk fat contamination. The obtained results suggest that the environmental chemical background has the highest share in the contamination sources pattern. Ion trap mass spectrometry coupled to high-resolution gas chromatography with semi-permeable membrane dialysis sample cleanup was used for determination of PCBs and PBDEs in milk fat. Determined butter fat PCB profiles were similar to the profiles characteristic for Aroclor 1254 technical mixture. Our data indicate that dietary intake of PCB/PBDE with milk and milk products may be estimated to be about 717.5 pg kg b.w.^?1 day^?1 for six-indicator PCBs, 0.329 (equivalent toxicity, TEQ) pg kg b.w.^?1 day^?1 for 12 DL PCBs and 50 pg kg b.w.^?1 day^?1 for PBDEs (sum of 14 congeners).     

Accuracy Assessment of NOAA Gridded Daily Reference Evapotranspiration for the Texas High Plains

The National Oceanic and Atmospheric Administration (NOAA) provides daily reference evapotranspiration (ET_ref) maps for the contiguous United States using climatic data from North American Land Data Assimilation System (NLDAS). This data provides large‐scale spatial representation of ET_ref, which is essential for regional scale water resources management. Data used in the development of NOAA daily ET_ref maps are derived from observations over surfaces that are different from short (grass — ET_os) or tall (alfalfa — ET_rs) reference crops, often in nonagricultural settings, which carries an unknown discrepancy between assumed and actual conditions. In this study, NOAA daily ET_os and ET_rs maps were evaluated for accuracy, using observed data from the Texas High Plains Evapotranspiration (TXHPET) network. Daily ET_os, ET_rs and the climatic data (air temperature, wind speed, and solar radiation) used for calculating ET_ref were extracted from the NOAA maps for TXHPET locations and compared against ground measurements on reference grass surfaces. NOAA ET_ref maps generally overestimated the TXHPET observations (1.4 and 2.2 mm/day ET_os and ET_rs, respectively), which may be attributed to errors in the NLDAS modeled air temperature and wind speed, to which reference ET_ref is most sensitive. Therefore, a bias correction to NLDAS modeled air temperature and wind speed data, or adjustment to the resulting NOAA ET_ref, may be needed to improve the accuracy of NOAA ET_ref maps.     

Identifying and Evaluating a Suitable Index for Agricultural Drought Monitoring in the Texas High Plains

Drought is a complex and highly destructive natural phenomenon that affects portions of the United States almost every year, and severe water deficiencies can often become catastrophic for agricultural production. Evapotranspiration (ET) by crops is an important component in the agricultural water budget; thus, it is advantageous to include ET in agricultural drought monitoring. The main objectives of this study were to (1) conduct a literature review of drought indices with a focus to identify a simple but simultaneously adequate drought index for monitoring agricultural drought in a semiarid region and (2) using the identified drought index method, develop and evaluate time series of that drought index for the Texas High Plains. Based on the literature review, the Standardized Precipitation‐Evapotranspiration Index (SPEI) was found to satisfy identified constraints for assessing agricultural drought. However, the SPEI was revised by replacing reference ET with potential crop ET to better represent actual water demand. Data from the Texas High Plains Evapotranspiration network was used to calculate SPEIs for the major irrigated crops. Trends and magnitudes of crop‐specific, time‐series SPEIs followed crop water demand patterns for summer crops. Such an observation suggests that a modified SPEI is an appropriate index to monitor agricultural drought for summer crops, but it was found to not account for soil water stored during the summer fallow period for winter wheat.     

Biodegradation of polyethylene films with prooxidant additives

Prooxidant additives represent a promising solution to the problem of the environment contamination with polyethylene film litter. Prooxidants accelerate photo- and thermo-oxidation and consequent polymer chain cleavage rendering the product apparently more susceptible to biodegradation. The question not fully resolved remains the biodegradation itself, its mechanism and especially the factors influencing the time-frame in which it can occur. The presented review is aimed to provide comprehensible information for both microbiologists and polymer scientists, who need participate in the research leading to an understanding of the microorganism action on the oxidized polyethylene and to design of new materials.     

An analysis of accidents caused by improper functioning of machine control systems.

The scope of this study covers events resulting from improper functioning of machine control systems. An accident model providing a basis for formulating a checklist for accident analysis has been developed. Data about 700 accidents were collected. An analysis has proved that in the group of accidents caused by improper functioning of machine control systems, serious accidents happened much more frequently as compared to the group of accidents with no relation to the control system. The reasons for the majority of incidents caused by improper performance of safety functions consist in the errors made by designers. In view of that, incorrect behaviour of a worker should be treated as a normal event instead of a deviation causing an accident.