Benthic invertebrates structure in wetlands of a tributary of the middle Parana River (Argentina) affected by hydrologic and anthropogenic disturbances

The present study was aimed at analyzing chromium concentrations in water column and bottom sediments in the main channel of Northern Salado River (tributary of Middle Parana River) and its floodplain. The main changes caused by human activities and hydrological disturbances on benthic invertebrate structure were also analyzed. Sediment concentrations of the reference area varied between 44.2 and 97.1 microg Crg(-1) (dw), and in the impacted zone, between 85.5 and 209 microg Cr g(-1) (dw) reaching the highest values in the wetland floodplain. Alfa, beta and gamma diversities in the reference section have been 33, 9 and 66 species, and in the disturbed section, they have been 37, 8.33 and 74 species, respectively The species dominant in the disturbed habitats were characterized by a small body size and short life cycles, as the species of olig chaetes Naidinae. The extreme flooding produced a rejuvenation of the area with the consequent physical re-structuration produced by flooding, showing: a marked decrease in chromium levels in sediments and in organic matter content, which allowed the colonization of insects (Ephemeroptera and Trichoptera).     

Male lagoon gobies, <Emphasis Type="Italic">Knipowitschia panizzae</Emphasis>, prefer more ornamented to larger females

Female ornamentation may be directly sexually selected, by male choice or female competition, or occurs as the result of a genetic correlation, arising from sexual selection on males. However, increasing evidence supports the former hypothesis, suggesting that males actively choose their partner preferring traits indicative of female quality. In the lagoon goby, Knipowitschia panizzae, a polygynous species whose males perform parental care to eggs, body length and the size of a sex-specific yellow patch on the belly are known to be reliable indicators of female fecundity. In this paper, we tested, using dummies, the male’s mating preferences for female body and yellow belly patch sizes. The two experimental trials in which a single female trait was variable showed that males prefer a larger belly patch and a larger body size, indicating that both these characters are selected by male mate choice. However, when faced with dummies exhibiting an inverse combination of body and belly patch sizes (experiment 3), males significantly preferred the smaller ones with larger yellow belly patches. A calculation of dummy theoretical fecundity reveals that in the first two experiments, males would have received an immediate benefit from their choice in terms of egg number, whereas in the third one, males chose partners that would have provided them with fewer eggs. The male lagoon goby preference for females with larger belly patches, regardless of their size, suggests that this trait, in addition to indicating fecundity, conveys information about other aspects of female and/or egg quality.     

Information-theory approach to allometric growth of marine organisms

Allometric growth investigations are usually conducted by fitting the allometric model (L) (y, x are morphometric characters and b the allometric exponent), which is quite simple both conceptually and mathematically, and its parameters are easy to estimate by linear regression. However b is not necessarily constant and it may change either continuously or abruptly at specific breakpoints; thus, the simple L model quite often fails to describe allometric growth successfully. In the current context, a better alternative is proposed, based on Kullback–Leibler (K-L) information theory and multi-model inference (MMI). Allometric growth was investigated in eight marine species: the bivalves Pecten jacobaeus and Pinna nobilis, the squids Todarodes sagittatus and Todaropsis eblanae, the crab Pachygrapsus marmoratus (females), the ghost shrimp Pestarella tyrrhena (males), and the fishes Trachurus trachurus and Sparus aurata. In each of the eight species, a pair of body parts was measured and the allometric growth of one body part in relation to the other (reference dimension) was studied, by fitting five different candidate models including: the simple allometric model, two models assuming that b changed continuously and two other assuming that b had a breakpoint. For each species, the ‘best’ model was selected by minimizing the small-sample, bias-corrected form of the Akaike Information Criterion. To quantify the plausibility of each model, given the data and the set of five models, the ‘Akaike weight’ w _i of each model was calculated; based on w _i the average model was estimated for each case. MMI is beneficial, more robust, and may reveal more information than the classical approach. As demonstrated with the given examples, estimation of b from the linear model, when it was not supported by the data, revealed some characteristic pitfalls, such as concluding positive allometry when there is actually negative or vice versa, or reporting allometry when the data in reality support isometric growth or vice versa.     

Lead particle size and its association with firing conditions and range maintenance: implications for treatment

Six firing range soils were analyzed, representing different environments, firing conditions, and maintenance practices. The particle size distribution and lead (Pb) concentration in each soil fraction were determined for samples obtained from the backstop berms. The main factors that were found to influence Pb fragment size were the type of soil used to construct the berms and the type of weapon fired. The firing of high velocity weapons, i.e., rifles, onto highly angular soils induced significant fragmentation of the bullets and/or pulverization of the soil itself. This resulted in the accumulation of Pb in the finer soil fractions and the spread of Pb contamination beyond the vicinity of the backstop berm. Conversely, the use of clay as backstop and the use of low velocity pistols proved to be favorable for soil clean-up and range maintenance, since Pb was mainly present as large metallic fragments that can be recovered by a simple screening process. Other factors that played important roles in Pb particle size distribution were soil chemistry, firing distance, and maintenance practices, such as the use of water spray for dust suppression and deflectors prior to impact. Overall, coarse Pb particles provide much easier and more cost-effective maintenance, soil clean-up, and remediation via physical separation. Fine Pb particles release Pb more easily, pose an airborne Pb hazard, and require the application of stabilization/solidification treatment methods. Thus, to ensure sustainable firing range operations by means of cost-effective design, maintenance, and clean-up, especially when high velocity weapons are used, the above mentioned factors should be carefully considered.     

The impact on tropospheric ozone formation on the implementation of a program for mobile emissions control: a case study in São Paulo,Brazil

The main sources of reactive hydrocarbons (RHC) and nitrogen oxides (NO_x), ozone precursors, in the Metropolitan Area of São Paulo (MASP) in the southeast of Brazil are emissions from vehicles fleets. Ambient surface ozone and particulate matter concentrations are air quality problem in the MASP. This study examined the impact that implementing a control program for mobile emissions has on ozone concentrations, An episode of high surface ozone concentrations occurring in the MASP during the March 13–15, 2000 period was used as a case study that was modeled for photochemical oxidants using the California Institute of Technology/Carnegie Mellon University three-dimensional photochemical model. Different scenarios were analyzed in relationship to the implementation of the Programa Nacional de Controle de Poluição por Veículos Automotores (PROCONVE, National Program to Control Motor Vehicle Pollution). Scenario 1 assumed that all vehicles were operating within PROCONVE guidelines. Scenarios 2 and 3 considered hypothetical situations in which the PROCONVE was not implemented. Scenario 2 set the premise that vehicles were using pre-1989 technology, whereas scenario 3 allowed for technological advances. A base case scenario, in which the official emission inventory for the year 2000 was employed, was also analyzed. The CIT model results show agreement with most measurements collected during 13–15 March 2000 modeling episode. Mean normalized bias for ozone, CO, RHC and NO _x are approximately 9.0, 6.0, ?8.3, 13.0%, respectively. Tropospheric ozone concentrations predicted for scenario 2 were higher than those predicted for scenarios 1, 3 and base case. This study makes a significant contribution to the evaluation of air quality improvement and provides data for use in evaluating the economic costs of implementing a program of motor vehicle pollution control aimed at protecting human health.     

Mitigation of methane emission from an old unlined landfill in Klintholm,Denmark using a passive biocover system

Methane generated at landfills contributes to global warming and can be mitigated by biocover systems relying on microbial methane oxidation. As part of a closure plan for an old unlined landfill without any gas management measures, an innovative biocover system was established. The system was designed based on a conceptual model of the gas emission patterns established through an initial baseline study. The study included construction of gas collection trenches along the slopes of the landfill where the majority of the methane emissions occurred. Local compost materials were tested as to their usefulness as bioactive methane oxidizing material and a suitable compost mixture was selected. Whole site methane emission quantifications based on combined tracer release and downwind measurements in combination with several local experimental activities (gas composition within biocover layers, flux chamber based emission measurements and logging of compost temperatures) proved that the biocover system had an average mitigation efficiency of approximately 80%. The study showed that the system also had a high efficiency during winter periods with temperatures below freezing. An economic analysis indicated that the mitigation costs of the biocover system were competitive to other existing greenhouse gas mitigation options.     

Towards a framework for assessment and management of cumulative human impacts on marine food webs

Effective ecosystem‐based management requires understanding ecosystem responses to multiple human threats, rather than focusing on single threats. To understand ecosystem responses to anthropogenic threats holistically, it is necessary to know how threats affect different components within ecosystems and ultimately alter ecosystem functioning. We used a case study of a Mediterranean seagrass (Posidonia oceanica) food web and expert knowledge elicitation in an application of the initial steps of a framework for assessment of cumulative human impacts on food webs. We produced a conceptual seagrass food web model, determined the main trophic relationships, identified the main threats to the food web components, and assessed the components’ vulnerability to those threats. Some threats had high (e.g., coastal infrastructure) or low impacts (e.g., agricultural runoff) on all food web components, whereas others (e.g., introduced carnivores) had very different impacts on each component. Partitioning the ecosystem into its components enabled us to identify threats previously overlooked and to reevaluate the importance of threats commonly perceived as major. By incorporating this understanding of system vulnerability with data on changes in the state of each threat (e.g., decreasing domestic pollution and increasing fishing) into a food web model, managers may be better able to estimate and predict cumulative human impacts on ecosystems and to prioritize conservation actions.     

Challenges in modeling detailed and complex environmental data sets: a case study modeling the excess partial pressure of fluvial $$\hbox {CO}_2$$ CO 2

Environmental and Ecological Statistics - Advances in sensor technology enable environmental monitoring programmes to record and store measurements at a high temporal resolution, enhancing the...