Comparison of the suitability of two lichen species and one higher plant for monitoring airborne heavy metals

We compared the capacity to accumulate airborne heavy metals of two lichens (Flavoparmelia caperata and Parmotrema chinense) and one higher plant (Nerium oleander) at a very densely populated urban site near Naples. After 15, 45, 75, and 120 days of exposure at four sites with different levels of air pollution, equal portions of thalli and 20 leaves were collected, and four environmentally significant elements, Fe, Cu, Zn, and Pb, were measured by inductively coupled plasma analysis. To compare the accumulation rates of lichens and the vascular plant, we determined an index of relative accumulation rate of pollutants during time and the ratio between the concentrations of each element in exposed samples to that of control samples (exposed-to-control ratio). Our data indicate F. caperata as being the most suitable bioaccumulator, followed by P. chinense. N. oleander was also found to be a useful heavy metal biomonitor though not suitable as a bioaccumulator.     

Magnetic susceptibility measurements as proxy method to monitor soil pollution: the case study of S. Nicola di Melfi

The development of in situ, cheep, noninvasive, and fast strategies for soil monitoring is a crucial task for environmental research. In this paper, we present the results of three field surveys carried out in an industrial area of Southern Italy: S. Nicola di Melfi. The monitoring procedure is based on soil magnetic susceptibility measurements carried out by means of experimental protocols that our research group developed during the last years. This field surveys is supported by both geological characterization of the area and analytical determinations of metal concentrations in soils. Magnetic studies were carried out not only in situ but also in laboratory. Results show that, taking into account the influence due to the geomorphologic difference, soil magnetic susceptibility is an optimal indicator of the anthropogenic impact. So, our monitoring strategy discloses that the combined use of magnetic susceptibility measurements and soil geomorphology information may be used as a useful tool for the temporal monitoring of pollution evolution and for a fast screening of polluted zones.     

Sources of potentially toxic elements and organic pollutants in an urban area subjected to an industrial impact

Urban and industrial development has caused a major impact on environmental soil quality. This work assesses the extent and severity of contamination in a small urban area subjected to an industrial impact and identifies the major anthropogenic inputs. Twenty-six soil samples were collected from agricultural and urban sites, and concentrations of potentially toxic elements (As, Cd, Cu, Cr, Fe, Mn, Ni, Pb and Zn), PAHs and PCBs, were determined. In spite of the low median concentrations observed, some sites represent a potential hazard for human health and ecosystems. Concentrations of contaminants were higher than those found in a nearby city, indicating that the study area is affected by the surrounding industry. The use of multivariate statistical analyses allowed for the identification of the main factors controlling the variability of potentially toxic elements and organic pollutants in the soils. The presence of Cr, Fe, Mn and Ni was associated with geogenic inputs, and Cu, Pb, Zn, As, PAHs and PCBs were associated with anthropogenic inputs. Industry and traffic were the most important anthropogenic sources. Soil characteristics were identified as important factors controlling the spatial variability of elements, both from recognised natural and anthropogenic origin. Differences between land uses were observed, which may be attributed to both management practices and proximity to sources.     

Spatial variability of air pollutants in the city of Taranto, Italy and its potential impact on exposure assessment

Epidemiological studies typically use monitored air pollution data from a single station or as averaged data from several stations to estimate population exposure. In industrialized urban areas, this approach may present critical issues due to the spatial complexities of air pollutants which are emitted by different sources. This study focused on the city of Taranto, which is one of the most highly industrialized cities in southern Italy. Epidemiological studies have revealed several critical situations in this area, in terms of mortality excess and short-term health effects of air pollution. The aims of this paper are to study the variability of air pollutants in the city of Taranto and to interpret the results in relation to the applicability of the data in assessing population exposure. Meteorological and pollution data (SO2, NO2, PM10), measured simultaneously and continuously during the period 2006–2010 in five air quality stations, were analyzed. Relative and absolute spatial concentration variations were investigated by means of statistical indexes. Results show significant differences among stations. The highest correlation between stations was observed for PM10 concentrations, while critical values were found for NO2. The worst values were observed for the SO2 series. The high values of 90th percentile of differences between pairs of monitoring sites for the three pollutants index suggest that mean concentrations differ by large amounts from site to site. The overall analysis supports the hypothesis that various parts of the city are differently affected by the different emission sources, depending on meteorological conditions. In particular, analysis revealed that the influence of the industrial site may be primarily identified with the series of SO2 data which exhibit higher mean concentration values and positive correlations with wind intensity when the monitoring station is downwind from the industrial site. Results suggest evaluating the population exposure to air pollutants in industrialized cities by taking into account the possible zones of influence of different emission sources. More research is needed to identify an indicator, which ought to be a synthesis of several pollutants, and take into account the meteorological variables.     

Soil heavy metal contamination in an industrial area: analysis of the data collected during a decade

Soil contamination by heavy metals has become a serious problem mainly because, above certain concentrations, all metals have adverse effects on human health. In particular, the accumulation of heavy metals in agricultural soils leads to elevated uptake by crops and affects food quality and safety. In this paper, we present the results of a study carried out over a decade for evaluating the impact of a new industrial settlement in an area geared to agriculture and livestock and far from urban sites. We focus our study on the bioavailable fraction of Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn in soil samples. Heavy metal concentrations in soil are analysed with both univariate and multivariate statistical procedures. The main goal of this paper is the development of a statistical procedure, based on a mix of multivariate analysis, able to compare field surveys carried out during different years and to characterize spatial and temporal changes in soil heavy metals concentrations.     

Detection of hormones in surface and drinking water in Brazil by LC-ESI-MS/MS and ecotoxicological assessment with <Emphasis Type="Italic">Daphnia magna</Emphasis>

The growing use of pharmaceutical drug is mainly due to several diseases in human and in animal husbandry. As these drugs are discharged into waterways via wastewater, they cause a major impact on the environment. Many of these drugs are hormones; in which even at low concentrations can alter metabolic and physiological functions in many organisms. Hormones were found in surface water, groundwater, soil, and sediment at concentrations from nanograms to milligrams per liter of volume—quantities known to cause changes in the endocrine system of aquatic organisms. This study aimed to develop a methodology for hormone detection (estriol, estrone, 17β-estradiol, 17α-ethinylestradiol, progesterone, and testosterone) on surface and treated water samples. Sample toxicity was assessed by ecotoxicology tests using Daphnia magna. A liquid chromatograph coupled to a mass spectrometer with an electrospray ionization source (LC-ESI-MS/MS) was used for the analysis. The results showed that samples were contaminated by the hormones estriol, estrone, progesterone, 17β-estradiol, and 17α-ethinylestradiol during the sampling period, and the highest concentrations measured were 90, 28, 26, 137, and 194 ng·L^?1, respectively. This indicates the inflow of sewage containing these hormones at some points in the Piracicaba River in the State of Sao Paulo—Brazil. Results indicated little toxicity of the hormone estriol in D. magna, indicating that chronic studies with this microcrustacean are necessary.     

Chronic copper exposure and fatty acid composition of the amphipod Dikerogammarus villosus: results from a field study

Field study allows assessment of long-term effects on fatty acid (FA) composition of organisms under chronic exposure to metals. One expected effect of copper is peroxidation of lipids and essentially polyunsaturated fatty acids (PUFA). FA analysis was established for the amphipod Dikerogammarus villosus subjected to different degrees of copper exposure (4–40 μg Cu L⁻¹). A previous study in our team showed that this species regulates its body Cu concentration (106–135 mg Cu kg⁻¹ dry weight). Despite the high capacity of bioaccumulation, the absence of a correlation between copper concentration in D. villosus and water prevents its use as bioindicator of copper pollution. Both sexes from the most polluted site showed the lowest total FA content, but the highest PUFA percent, mainly of the long-chained variety (C20–C22). Mechanisms leading to the prevention of lipid peroxidation in this species were discussed (metallothioneins and intracellular granules) and proposed with support from literature data.     

Kinetic studies of endosulfan photochemical degradations by ultraviolet light irradiation in aqueous medium

Kinetic studies of endosulfan photochemical degradation in controlled aqueous systems were carried out by ultraviolet light irradiation at lambda = 254 nm. The photolysis of (alpha + beta: 2 + 1) endosulfan, alpha-endosulfan and beta-endosulfan were first-order kinetics. The observed rate constants obtained from linear least-squares analysis of the data were 1 x 10(-4) s(-1); 1 x 10(-4) s(-1); and 2 x 10(-5) s(-1), respectively, and the calculated quantum yields (phi) were 1, 1 and 1.6, respectively. Preliminary differential pulse polarographic (DPP) analysis allowed to observe the possible endosulfan photochemical degradation pathway. This degradation route involves the formation of the endosulfan diol, its transformation to endosulfan ether and finally the ether's complete degradation by observing the potential shifts.     

Cyanide generation during preservation of chlorinated wastewater effluent samples for total cyanide analysis.

Dechlorinating agents and pH adjustment are often used to preserve wastewater samples for cyanide analysis. The effects of four approved preservation protocols on the results of the total cyanide analysis of effluents from four water reclamation plants were examined. The results differed widely, and a clear pattern emerged. Immediate analysis without pH adjustment generally gave total cyanide concentrations below the reporting limit of 5 microg/L, irrespective of the dechlorinating agents used. When the pH was adjusted to > or =12, a slight increase in the measured total cyanide concentration was observed when thiosulfate was used to dechlorinate the samples, and a significant increase (>10 microg/L) was observed when arsenite was used as the dechlorinating agent. These results provide evidence that approved preservation protocols may give rise to cyanide formation in chlorinated wastewater effluent matrices.