Greenhouse evaluation and environmental impact assessment of different urine-derived struvite fertilizers as phosphorus sources for plants

A selection of six urine-derived struvite fertilizers generated by innovative precipitation technologies was assessed for their quality and their effectiveness as phosphorus sources for crops. Struvite purity was influenced by drying techniques and magnesium dosage. In a greenhouse experiment, the urine fertilizers led to biomass yields and phosphorus uptakes comparable to or higher than those induced by a commercial mineral fertilizer. Heavy metal concentrations of the different struvite fertilizers were below the threshold limits specified by the German Fertilizer and Sewage Sludge Regulations. The computed loading rates of heavy metals to agricultural land were also below the threshold limits decreed by the Federal Soil Protection Act. Urine-derived struvite contributed less to heavy metal inputs to farmland than other recycling products or commercial mineral and organic fertilizers. When combined with other soil conditioners, urine-derived struvite is an efficient fertilizer which covers the magnesium and more than half of the phosphorus demand of crops.     

All-Cellulose Composite Fibers Obtained by Electrospinning Dispersions of Cellulose Acetate and Cellulose Nanocrystals

All-cellulose composite fibers were produced by electrospinning dispersions containing cellulose acetate (CA) and cellulose nanocrystals (CNCs). Precursor polymer matrices were obtained after dispersion of CA with different degrees of substitution in a binary mixture of organic solvents. The obtained fibers of CA loaded with CNCs had typical widths in the nano- and micro-scale and presented a glass transition temperature of 145?°C. The CA component was converted to cellulose by using alkaline hydrolysis to yield all-cellulose composite fibers that preserved the original morphology of the precursor system. Together with Fourier Transform Infrared Spectroscopy fingerprints the thermal behavior of the all-cellulose composite fibers indicated complete conversion of cellulose acetate to regenerated cellulose. Noticeable changes in the thermal, surface and chemical properties were observed upon deacetylation. Not only the thermal transitions of cellulose acetate disappeared but the initial water contact angle of the web was reduced drastically. Overall, we propose a simple method to produce all-cellulose composite fibers which are expected to display improved thermo-mechanical properties while keeping the unique features of the cellulose polymer.     

Degradation of propyl paraben by activated persulfate using iron-containing magnetic carbon xerogels: investigation of water matrix and process synergy effects

An advanced oxidation process comprising an iron-containing magnetic carbon xerogel (CX/Fe) and persulfate was tested for the degradation of propyl paraben (PP), a contaminant of emerging concern, in various water matrices. Moreover, the effect of 20 kHz ultrasound or light irradiation on process performance was evaluated. The pseudo-first order degradation rate of PP was found to increase with increasing SPS concentration (25–500 mg/L) and decreasing PP concentration (1690–420 μg/L) and solution pH (9–3). Furthermore, the effect of water matrix on kinetics was detrimental depending on the complexity (i.e., wastewater, river water, bottled water) and the concentration of matrix constituents (i.e., humic acid, chloride, bicarbonate). The simultaneous use of CX/Fe and ultrasound as persulfate activators resulted in a synergistic effect, with the level of synergy (between 35 and 50%) depending on the water matrix. Conversely, coupling CX/Fe with simulated solar or UVA irradiation resulted in a cumulative effect in experiments performed in ultrapure water.     

A data synthesis on the biochar properties and implications for air,soil, and water quality in Brazil

Biochar has been intensively researched worldwide. In Brazil, there is a variety of feedstock production that can be turned into soil amendments of high performance through biochar conversion, especially solid wastes. However, advances in biochar research in Brazil have not been systematically evaluated to indicate possible gaps and suggest future research for eco-friendly applications. Thus, in this work we evaluated biochar properties and effects on air, water, and soil quality based on data gathered from researches performed in Brazil. Biochar has been mainly evaluated as soil conditioner (37%), material characterization (17%), water treatment (12%), and greenhouse gases emissions (9%). Based on the data synthesis of 68 feedstocks used for biochar production, we observed that the pyrolysis temperature profoundly affects biochar properties. Meta-analysis indicated benefits of biochar addition to soils for chemical, physical, microbiological and biochemical attributes that have resulted in increases in root growth (+30%), and plant shoots (+45%). Pyrolysis temperature and feedstock are key choices to design biochar properties aiming to retain dyes, aromatic hydrocarbon, pesticides, and metals in water and wastewater treatment. It was also observed an increase in CO₂ and a decrease in N₂O emissions after biochar application to soils in short-term experiments. Although there is a growing interest in the development of electrochemical sensors and biochar-based fertilizers, technological applications of biochar are still incipient in Brazil. Future research should prioritize long-term and mechanistically evaluations of biochar under field conditions and the development of eco-friendly technological applications.     

Enhanced biological nitrogen and phosphorus removal from sewage driven by fermented glycerol: comparative assessment between sequencing batch- and continuously fed-structured fixed bed reactor

Environmental Science and Pollution Research - The nutrient biological removal from sewage, especially from anaerobic reactor effluents, still represents a major challenge in conventional sewage...     

Turbulence investigation in the roughness sub-layer of a near wall flow

The turbulence behaviour along a wall roughened by pyramidal elements was analysed in the region extending from the apex of the roughness elements up to the external limit of the roughness sub-layer. The data used for the analysis were obtained by particle image velocimetry technique. The rough wall turbulent boundary layer flow is characterized by a relatively low Reynolds number. All the results on the rough wall were compared with data referring to the canonical flow on a smooth wall turbulent boundary layer. Mean values and turbulence quantities for the two flows collapse when approaching the external limit of the roughness sublayer. The quadrant analysis of the Reynolds shear stress, in the region near the surface, shows that the contribution of the sweep motions is about equivalent for the two flows (except for wall distances lower than 40 viscous units). The contribution of the ejection motions appears to be more important over the smooth wall than over the rough wall with increasing differences approaching the wall. The probability density functions of the streamwise fluctuating velocity field for the rough wall case appear to be positively skewed in the zone very close to the pyramid apex, in contrast with the behavior observed for the smooth wall case at corresponding distances from the wall. The integral and Taylor scales for the rough wall case appear to be strongly reduced by the presence of the roughness, while the Kolmogorov microscale shows higher values.     

Development of a green and efficient methodology for the heterocyclic aromatic amine determination in biomass samples generated from cigarette combustion and tobacco

Environmental Science and Pollution Research - A green methodology was developed for the analysis of ten heterocyclic aromatic amines (HAAs) in biomass samples from cigarette combustion such as...     

Local voices on renewable energy projects: the performative role of the regulatory process for major offshore infrastructure in England and Wales

There is currently a considerable emphasis on delivering major renewable energy infrastructure projects. Such projects will have impacts on local communities; some impacts may be perceived as positive but others will be viewed more negatively. Any just regulatory process for considering and permitting such infrastructure will need to heed the concerns that local communities voice. But what counts as a local voice? In this paper it is argued that the regulatory process plays a performative role, constructing what counts as a local voice. Furthermore, this has consequences for how regulatory deliberations proceed and the outcomes of regulatory processes. The empirical basis for this argument is a study of major offshore renewable energy infrastructure in England and Wales and the way that it is regulated through a specific regime – the Nationally Significant Infrastructure Projects (NSIPs) regime established by the Planning Act 2008. Through a detailed study of eight projects that have passed through the regime, the analysis unfolds the way that the voices of local residents, local businesses, local NGOs and local authorities are constructed in the key boundary object of the Examining Authority’s report; it then draws out the implications for the mitigation measures that are negotiated. The research suggests that what counts as a local voice is constrained by how the performative role of the NSIPs regulatory regime differentiates between interests and suggests that new ways of giving voice to local people are required.     

Pervaporation of ethanol produced from banana waste

Banana waste has the potential to produce ethanol with a low-cost and sustainable production method. The present work seeks to evaluate the separation of ethanol produced from banana waste (rejected fruit) using pervaporation with different operating conditions. Tests were carried out with model solutions and broth with commercial hollow hydrophobic polydimethylsiloxane membranes. It was observed that pervaporation performance for ethanol/water binary mixtures was strongly dependent on the feed concentration and operating temperature with ethanol concentrations of 1–10%; that an increase of feed flow rate can enhance the permeation rate of ethanol with the water remaining at almost the same value; that water and ethanol fluxes was increased with the temperature increase; and that the higher effect in flux increase was observed when the vapor pressure in the permeate stream was close to the ethanol vapor pressure. Better results were obtained with fermentation broth than with model solutions, indicated by the permeance and membrane selectivity. This could be attributed to by-products present in the multicomponent mixtures, facilitating the ethanol permeability. By-products analyses show that the presence of lactic acid increased the hydrophilicity of the membrane. Based on this, we believe that pervaporation with hollow membrane of ethanol produced from banana waste is indeed a technology with the potential to be applied.