Static magnetic field therapy: methodological challenges to conducting clinical trials

Static magnetic field (SMF) therapy delivered by permanent magnets is being used as a self-care intervention by millions of people worldwide, despite a paucity of clinical research confirming or refuting therapeutic effectiveness. Evaluating the reported results of SMF clinical trials is difficult because researchers use heterogeneous dosing regimens, unreliable sham controls, and questionable blinding strategies. Three important methodological challenges need to be contended with when conducting and interpreting SMF studies: optimization of SMF dosimetry, use of a believable physiologically inert sham, and assurance of participant blinding in unsupervised settings. Our objectives in writing this review are to describe ten essential SMF dosing parameters that need to be reported in SMF clinical trials and to discuss sham controls and blinding procedures for SMF studies.     

Biotests for environmental quality assessment of composted sewage sludge

The quality of sewage sludge-based products, such as composts and growth media, is affected by the contamination of sewage sludge with, potentially, hundreds of different substances. Therefore, it is difficult to achieve the reliable environmental quality assessment of sewage sludge-based products solely based on chemical analysis. In the present work, we demonstrate the use of the kinetic luminescent bacteria test (ISO 21338) to evaluate acute toxicity and the Vitotox? test to monitor genotoxicity of sewage sludge and composted sewages sludge. In addition, endocrine-disrupting and dioxin-like activity was studied using yeast-cell-based assays. The relative contribution of industrial waste water treated at the Waste Water Treatment Plants led to elevated concentrations of polyaromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and polychlorinated dibenzo-p-dioxins and -furans (PCDD/F) in sewage sludge. The effect of elevated amounts of organic contaminants could also be identified with biotests able to demonstrate higher acute toxicity, genotoxicity, and potential for endocrine-disruptive properties. Additional extraction steps in kinetic luminescent bacteria test with DMSO and hexane increased the level of toxicity detected. Composting in a pilot-scale efficiently reduced the amounts of linear alkylbenzensulphonates (LASs), nonylphenols and nonylphenolethoxylates (NPE/NPs) and PAH with relative removal efficiencies of 84%, 61% and 56%. In addition, decrease in acute toxicity, genotoxicity and endocrorine-disrupting and dioxin-like activity during composting could be detected. However, the biotests did have limitations in accessing the ecotoxicity of test media rich with organic matter, such as sewage sludge and compost, and effects of sample characteristics on biotest organisms must be acknowledged. The compost matrix itself, however, which contained a high amount of nutrients, bark, and peat, reduced the sensitivity of the genotoxicity tests and yeast bioreporter assays.     

Accelerating the deployment of carbon capture and storage technologies by strengthening the innovation system

In order to take up the twin challenge of reducing carbon dioxide (CO₂) emissions, while meeting a growing energy demand, the potential deployment of carbon dioxide capture and storage (CCS) technologies is attracting a growing interest of policy makers around the world. In this study we evaluate and compare national approaches towards the development of CCS in the United States, Canada, Norway, the Netherlands, and Australia. The analysis is done by applying the functions of innovation systems approach. This approach posits that new technology is developed, demonstrated and deployed in the context of a technological innovation system. The performance assessment of the CCS innovation system shows that the extensive knowledge base and knowledge networks, which have been accumulated over the past years, have not yet been utilized by entrepreneurs to explore the market for integrated CCS concepts linked to power generation. This indicates that the build-up of the innovation system has entered a critical phase that is decisive for a further thriving development of CCS. In order to move the CCS innovation system through this present difficult episode and deploy more advanced CCS concepts at a larger scale; it is necessary to direct policy initiatives at the identified weak system functions, i.e. entrepreneurial activity, market creation and the mobilization of resources. Moreover, in some specific countries it is needed to provide more regulatory guidance and improve the legitimacy for the technology. We discuss how policy makers and technology managers can use these insights to develop a coherent policy strategy that would accelerate the deployment of CCS.     

Mathematical modelling of pulsed magnetic field action on neurons’ bioelectric activity

Hodgkin–Huxley model, describing generation of action potentials in axons’ membranes, has been used for appreciation of the possible mechanisms of electromagnetic fields influence on neurons’ electrical activity. It follows from the carried calculations that flowing through an axon of the external current pulses, which have an area of rise, an area of DC, and an area of drop, does not influence own excitation pulses passage if periods of rise and drop are slope enough. Depending on the external current parameters, own excitation pulses may not be influenced or may be suppressed at greater velocity of rise and drop of an external current. Moreover, induced excitation pulses appear at definite parameters of an external current. In the case, when at passage through an axon of an external current, own excitation pulses follow one by one (paired pulse facilitation), and the second pulse may be suppressed if its level will not be increased additionally in comparison with the case of an external current absence. It is possible that such increase happens “automatically” as a result of “tuning” (adaptation) of axons to the conditions of flowing through them of an external current. It may be an explanation of the phenomena observed in experiments.     

Quantification of ecotoxicological tests based on bioluminescence using Polaroid film

Assays based on the measurement of bacterial luminescence are widely used in ecotoxicology. Bacterial strains responding either to general toxicity or specific pollutants are rapid, cost-effective and easy to use. However, quantification of the signal requires relatively expensive instrumentation. We show here that the detection of luminescence of BioTox, a Vibrio fischeri-based toxicity test, and of a specific recombinant bacterial strain for arsenic determination, is possible using common Polaroid film. The exposed films can be used for visual or computer-assisted quantification of the signal. Qualitative visual comparison to standards can be used in the rapid and relatively accurate estimation of toxicity or pollutant concentration. The computer-assisted method significantly improves the accuracy and quantification of the results. The results obtained by computer-assisted quantification were in good agreement with the values obtained with a luminometer.     

Role of dissolved humic acids in the biodegradation of a single isomer of nonylphenol by Sphingomonas sp

This study shows the important role of humic acids in the degradation of ¹⁴C and ¹³C labeled isomer of NP by Sphingomonas sp. strain TTNP3 and the detoxification of the resulting metabolites. Due to the association of NP with humic acids, its solubility in the medium was enhanced and the extent of mineralization of nonylphenol increased from 20% to above 35%. This was accompanied by the formation of significant amounts of NP residues bound to the humic acids, which also occurred via abiotic reactions of the major NP metabolite hydroquinone with the humic acids. Gel permeation chromatography showed a non-homogenous distribution of NP residues with humic acids molecules, with preference towards molecules with high-molecular-weight. Solid state ¹³C nuclear magnetic resonance spectroscopy indicated that the nonextractable residues resulted exclusively from the metabolites. The chemical shifts of the labeled carbon indicated the possible covalent binding of hydroquinone to the humic acids via ester and possibly ether bonds, and the incorporation of degradation products of hydroquinone into the humic acids. This study provided evidences for the mediatory role of humic acids in the fate of NP as a sink for bacterial degradation intermediates of this compound.     

Rove beetles (Coleoptera: Staphylinidae) collected during the long term ecological research in a Hungarian oak forest

Along term ecological research was carried out in a Hungarian oak forest, in "Bükk" National Park starting with 1972. During the faunistical studies 3,602 insect species and more than 200,000 individuals were collected. The dominant orders were Coleoptera (1,051 species), Lepidoptera (803 species), Hymenoptera (470 species) and Diptera (400 species). The relative species abundance (RSA) for all insects collected in all years of sampling period suggests a rather J shape curve than a not clear scaling property. This means that we were able to identify almost three quarters of the insect species from one ha European oak forest during the survey (from 1987 to 2003), and two third of the staphylinides expected. Considering the staphylinid fauna a total number of 160 species and 4,022 individuals were collected. The most widely occurring species in dominance order were: Ocypus biharicus, Pseudocypus mus, Atheta gagatina, Philonthus quisquiliarius, Oxypoda acuminate, Platydracus chalcocephalus, Atheta crassicomis, Latrimaeum atrocephalum, Haploglossa puncticollis, Philonthus succicola and Anotylus mutator. The pooled value of alpha diversity was 1.51. The Shannon-Weiner Index (H') was relatively high (3.29) in comparison with other studies.     

Evaluation of risk and cost using an age-dependent unavailability modelling of test and maintenance for standby components

The improvement of safety in the process industries is related to assessment and reduction of risk in a cost-effective manner. This paper addresses the trade-off between risk and cost related to standby safety systems. An age-dependent unavailability model that integrates the effects of the test and maintenance (T&M) activities as well as component ageing is developed and represents the basis for calculating risk. The repair “same-as-new” process is considered regarding the T&M activities. Costs are expressed as a function of the selected risk measure. The time-averaged function of the selected risk measure is obtained from probabilistic safety assessment, i.e. the fault tree analysis. This function is further extended with inclusion of additional parameters related to T&M activities as well as ageing parameters related to component ageing. In that sense, a new model of system unavailability, incorporating component ageing and T&M costs, is presented. The testing strategy is also addressed. Sequential and staggered testings are compared. The developed approach is applied on a standard safety system in nuclear power plant although the method is applicable to standby safety systems that are tested and maintained in other industries as well. The results show that the risk-informed surveillance requirements differ from existing ones in technical specifications, which are deterministically based. Moreover, the presented approach achieves a significant reduction in system unavailability over a relatively small increase of total T&M costs.