Operating parameters for high nitrite accumulation during nitrification in a rotating biological nitrifying contactor.

Incomplete nitrification was studied in a completely and partially submerged rotating biological contactor (RBC). In a partially submerged RBC without additional aeration, 50 to 90% nitrite accumulation (alpha) was achieved at rotation speeds (omega) of 2 to 18 min(-1). In a completely submerged RBC operating during 80 days, a higher alpha of 96% was achieved at omega = 2 min(-1). Incomplete nitrification in a completely submerged RBC at oxygen concentrations of 1.5 to 6.8 mg O2/L indicated that the mass transfer of oxygen is rate-limiting. Modeling of the completely submerged RBC predicts that the oxygen profile will not penetrate the biofilm more than 30 microm, thereby strongly limiting the nitrite-oxidizer growth and causing high nitrite accumulation. Molecular analysis (i.e., fluorescence in situ hybridization) indicated that the nitrite-oxidizers are superficially located (<200 microm) and that the ammonia-oxidizers comprise up to approximately 800 microm of the biofilm.     

Greenhouse gas emissions from Canadian peat extraction, 1990-2000: a life-cycle analysis

This study uses life-cycle analysis to examine the net greenhouse gas (GHG) emissions from the Canadian peat industry for the period 1990-2000. GHG exchange is estimated for land-use change, peat extraction and processing, transport to market, and the in situ decomposition of extracted peat. The estimates, based on an additive GHG accounting model, show that the peat extraction life cycle emitted 0.54 x 10(6) t of GHG in 1990, increasing to 0.89 x 10(6) t in 2000 (expressed as CO2 equivalents using a 100-y time horizon). Peat decomposition associated with end use was the largest source of GHGs, comprising 71% of total emissions during this 11-y period. Land use change resulted in a switch of the peatlands from a GHG sink to a source and contributed an additional 15%. Peat transportation was responsible for 10% of total GHG emissions, and extraction and processing contributed 4%. It would take approximately 2000 y to restore the carbon pool to its original size if peatland restoration is successful and the cutover peatland once again becomes a net carbon sink.     

Herbicide effects on typha latifolia (Linneaus) germination and root and shoot development

Aqueous 7-d germination and growth experiments were performed to compare responses of T. latifolia to exposures of atrazine (2-chloro-4-ethylamino-6-isopropylamine-s-atrazine) and paraquat dichloride (1,1′-dimethyl-4,4′-bipyridinium dichloride). T. latifolia seed germination was < 50 % in concentrations ≥ 1.0 mg/L of paraquat dichloride. No observed effect concentration (NOEC) and lowest observed effect concentration (LOEC) for paraquat and root growth were 0.001 and 0.01 mg/L, respectively, while NOEC and LOEC for paraquat and shoot growth were 0.01 and 0.1 mg/L, respectively following 7-d exposures. Greater than 72 % of seeds germinated in each concentration up to 30 mg/L atrazine. After 7-d exposure, NOEC and LOEC for atrazine and root growth were 0.1 and 1.0 mg/L, while atrazine and shoot growth NOEC and LOEC values were 15 and 30 mg/L, respectively. This research provides data concerning relative sensitivity of T. latifolia seedlings to the herbicides atrazine and paraquat, as well as the potential use of T. latifolia as a representative plant test species.     

Concentrations of dioxin-like PCB congeners in unweathered Aroclors by HRGC/HRMS using EPA Method 1668A

We have determined the congener compositions of nine commercial Aroclor products of polychlorinated biphenyls (PCBs) to the sub-part-per-million level using high-resolution gas chromatography combined with high-resolution mass spectrometry according to US Environmental Protection Agency (EPA) Method 1668A. These Aroclor composition data should allow improved characterization and risk assessment of PCB contamination at hazardous waste sites, particularly for dioxin-like PCB congeners. By combining the data on the concentrations of each dioxin-like congener with its World Health Organization toxicity equivalency factor, we have established dioxin toxic equivalent concentrations for each pure Aroclor product.     

Medium-term impacts of hydraulic clam dredgers on a macrobenthic community of the Adriatic Sea (Italy)

Hydraulic dredging targeting the bivalve Chamelea gallina in the northern and central Adriatic Sea has been taking place for over 30 years. In the period 2000–2001, 73 commercial dredgers harvested the resource within the sandy coastal area of the Ancona Maritime District (central Adriatic Sea). Despite this, no study aimed at investigating the impact of the fishery on the macrobenthic community of the area has ever been carried out. Sampling was done at 6 monthly intervals in an attempt to relate the impact of hydraulic dredging to different levels of fishing intensity. Data regarding two depth strata (4–6; 7–10 m) were analysed separately by means of permutational multivariate analysis of variance. The results revealed an overall condition of moderate disturbance within the benthic community, especially so within the 4–6 m depth stratum. The response of the benthic community to varying intensities of fishing activity was rapid, occurring within 6 months. Differences in the response of benthic community to differing intensities of fishing activity were found between the two depth strata considered. Significant differences in multivariate location of the benthic community were revealed between the three disturbance levels in both depth strata. Differences in multivariate dispersion were detected above a threshold level of fishing intensity, only within the shallow community. Differences were found between depth strata relating to species diversity and evenness, with significant differences between levels of fishing intensity being evident only within the 4–6 m depth stratum. The results emphasised that, even in a benthic community that is typical of a moderately disturbed environment, the effects of fishing on community structure were still discernible over and above the natural variation.     

Cleanup Options for Navajo Abandoned Uranium Mines

This article summarizes the current status of known contamination arising from abandoned uranium mines (AUMs) within the Navajo Nation and examines the options for addressing the elevated risks to health that AUM waste poses to the people of the Navajo Nation. More specifically, this article provides the following:

1. An overview of past uranium mining conducted on the Navajo Nation, the current status of AUM waste within the Navajo Nation, and the human health risks associated with uranium exposure.
2. A discussion of Navajo Fundamental Law, the Diné (the Navajo People) Uranium Remediation Advisory Commission, and the Navajo Nation Department of Justice's position regarding institutional controls and cleanup of AUMs.
3. A summary of cleanup actions taken to date to address AUM waste and the lessons learned from such actions.
4. Options for cleanup of AUM waste consistent with Diné Fundamental Law, the Diné Natural Resources Protection Act of 2005, and the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA).

The information summarized in this article was previously presented as an “Initial White Paper on Cleanup Options for Navajo Abandoned Uranium Mines,” prepared with participation from multiple stakeholders including the Navajo Nation Environmental Protection Agency (NNEPA), the Navajo Nation Department of Justice (NNDOJ), and the United States Environmental Protection Agency (US EPA). ©2016 Wiley Periodicals, Inc.     

Polynuclear Aromatic Hydrocarbons In Urban Atmospheres in Ontario

A comprehensive program comprising the collection of particulate samples at some 20 sampling sites throughout the Province of Ontario afforded seasonal or monthly composites of airborne particulates which were extracted for determinations of polynuclear hydrocarbons. Results indicated that concentrations of airborne carcinogens or potential carcinogens in urban air throughout Ontario are much lower than values reported in the literature for urban atmospheres in England. The project served as a test of the practicability of methods recommended for extractive, chromatographic, and spectroscopic aspects of a complex routine, and the experience gained should be useful as a guide in the ultimate establishment of standardized methods. The work has identified areas in the province where more detailed sampling would be useful, and has indicated analytical problems requiring investigation.     

Quantifying structural physical habitat attributes using LIDAR and hyperspectral imagery

Structural physical habitat attributes include indices of stream size, channel gradient, substrate size, habitat complexity, and riparian vegetation cover and structure. The Environmental Monitoring and Assessment Program (EMAP) is designed to assess the status and trends of ecological resources at different scales. High-resolution remote sensing provides unique capabilities in detecting a variety of features and indicators of environmental health and condition. LIDAR is an airborne scanning laser system that provides data on topography, channel dimensions (width, depth), slope, channel complexity (residual pools, volume, morphometric complexity, hydraulic roughness), riparian vegetation (height and density), dimensions of riparian zone, anthropogenic alterations and disturbances, and channel and riparian interaction. Hyperspectral aerial imagery offers the advantage of high spectral and spatial resolution allowing for the detection and identification of riparian vegetation and natural and anthropogenic features at a resolution not possible with satellite imagery. When combined, or fused, these technologies comprise a powerful geospatial data set for assessing and monitoring lentic and lotic environmental characteristics and condition.