A method for the analysis of organophosphorus pesticide residues in Mexican axolotl

A method based on matrix solid-phase dispersion (MSPD) was developed for quantitative extraction of three organophosphorus pesticides (OPPs) from the Mexican axolotl, Ambystoma mexicanum. The determination was carried out using high- performance liquid chromatography (HPLC) with diode array spectrophotometric UV detection (DAD). The MSPD extraction with octadecylsilyl (C18) sorbent combined with a silica gel clean-up and acetonitrile elution was optimised for chlorpyrifos, fenthion and methyl parathion. The method was validated, yielding recovery values higher than 90%. The precision, expressed as the relative standard deviation (RSD), was less than or equal to 6% in muscle samples at spiking levels of 10 and 5 ppm. Linearity was studied from 15 to 60 ppm for chlorpyrifos and fenthion, and from 7.5 to 30 ppm for methyl parathion. The limits of detection (LODs) were found to be less than or equal to 0.5 ppm_.This method was applied to the analysis of samples from a chlorpyrifos-exposed axolotl, demonstrating its use as an analytical tool for toxicological studies.     

Historical reconstruction of polychlorinated biphenyl (PCB) exposures for workers in a capacitor manufacturing plant

We developed a semiquantitative job exposure matrix (JEM) for workers exposed to polychlorinated biphenyls (PCBs) at a capacitor manufacturing plant from 1946 to 1977. In a recently updated mortality study, mortality of prostate and stomach cancer increased with increasing levels of cumulative exposure estimated with this JEM (trend p values?=?0.003 and 0.04, respectively). Capacitor manufacturing began with winding bales of foil and paper film, which were placed in a metal capacitor box (pre-assembly), and placed in a vacuum chamber for flood-filling (impregnation) with dielectric fluid (PCBs). Capacitors dripping with PCB residues were then transported to sealing stations where ports were soldered shut before degreasing, leak testing, and painting. Using a systematic approach, all 509 unique jobs identified in the work histories were rated by predetermined process- and plant-specific exposure determinants; then categorized based on the jobs’ similarities (combination of exposure determinants) into 35 job exposure categories. The job exposure categories were ranked followed by a qualitative PCB exposure rating (baseline, low, medium, and high) for inhalation and dermal intensity. Category differences in other chemical exposures (solvents, etc.) prevented further combining of categories. The mean of all available PCB concentrations (1975 and 1977) for jobs within each intensity rating was regarded as a representative value for that intensity level. Inhalation (in microgram per cubic milligram) and dermal (unitless) exposures were regarded as equally important. Intensity was frequency adjusted for jobs with continuous or intermittent PCB exposures. Era-modifying factors were applied to the earlier time periods (1946–1974) because exposures were considered to have been greater than in later eras (1975–1977). Such interpolations, extrapolations, and modifying factors may introduce non-differential misclassification; however, we do believe our rigorous method minimized misclassification, as shown by the significant exposure–response trends in the epidemiologic analysis.     

Enhancement of biodegradation of oil adsorbed on fine soils in a bioslurry reactor

Techniques for enhancing the biodegradation of oil-contaminated fine soils in a slurry-phase bioreactor were investigated. Using a model system consisting of kaolin particles containing adsorbed n-dodecane as a diesel fuel surrogate, we investigated how increasing the temperature and adding a surfactant and various hydrophobic support media affected the biodegradation rate of n-dodecane. Increasing the temperature from 25 to 35 degrees C decreased the time required for complete degradation of n-dodecane by 30%, from 110h to 80h. Addition of the surfactant polyethylene glycol p-1,1,3,3-tetramethylbutylphenyl ether decreased the degradation time to less than 48h at 35 degrees C, although a high concentration of the surfactant (3000mgl(-1)) was required. We suspect that the surfactant increased the degradation rate by solubilizing the n-dodecane into the solution phase in which the microorganisms were suspended. We tested five types of organic polymers as support media for the microorganisms and found that the biodegradation time could be reduced by approximately 50% with a support medium made from polyurethane; in the presence of this medium, only 36h was required for complete decomposition at 35 degrees C. The reduction in the degradation time was probably due to transfer of the n-dodecane from the soil to the support medium, which improved contact between the n-dodecane and the microorganisms. The polyurethane support medium bearing the microorganisms was stable and could be reused.     

Treatment technologies for mercury in soil,waste, and water

Mercury occurs naturally in the environment and can be found in elemental (metallic), inorganic, and organic forms. Modern uses for mercury include chemical manufacturing, thermometers, and lighting (mercury vapor and fluorescent lamps). The chemical and allied products industry group is responsible for the largest quantity of mercury used in the United States. Mercury, particularly the organic methylmercury form, is a potent neurotoxin capable of impairing neurological development in fetuses and young children and of damaging the central nervous system of adults. Mercury regulations span multiple federal and state environmental statutes, as well as multiple agency jurisdictions. In August 2007, the U.S. Environmental Protection Agency's (US EPA's) Office of Superfund Remediation and Technology Innovation (OSRTI) published a report titled “Treatment Technologies for Mercury in Soil, Waste, and Water.“ The report identifies eight treatment technologies and 57 projects, 50 of which provide performance data. This information can help managers at sites with mercury‐contaminated media and generators of mercury‐contaminated waste and wastewater to identify proven and effective mercury treatment technologies; screen technologies based on application‐specific goals, characteristics, and costs; and apply experiences from sites with similar treatment challenges. This article provides a synopsis of the US EPA report, which is available at http://clu‐in.org/542R07003 . © 2007 Wiley Periodicals, Inc. *

1 This article is a U.S. Government work and, as such, is in the public domain of the United States of America.

     

Multicystic dysplastic kidney: Natural history of prenatally detected cases

To delineate the natural history of fetal multicystic dysplastic kidneys (MDKs), all cases that were prenatally detected in the Prenatal Diagnosis Center of the University of Virginia from September 1985 to 31 August 1988 were reviewed. All patients were followed through the Center with serial ultrasound evaluations at approximately 4-week intervals, and each liveborn infant was evaluated and followed by one of the authors (S.S.H.) Of the 14 cases detected, ten were detected in the second trimester, the earliest at 16·5 weeks' gestation. Of the nine fetuses with non-lethal disease, there were two cases in which the lesion remained unchanged during observation. Both had an initial diagnosis in the third trimester. In those cases diagnosed in the second trimester (7), all showed an initial increase in the size and number of cysts, followed by involutional changes either in utero (2) or in the neonatal period (3). Two infants had immediate surgical removal of the MDK, one because of respiratory compromise, and the other because of an uncertain diagnosis on renal scan. Abnormalities of the contralateral kidney were found in 7 of 14 fetuses. Five were lethal conditions. Associated non-renal abnormalities were common in bilateral MDK (80 per cent), but rare in unilateral MDK (11 per cent).     

The occurrence of chlorinated bis-(propyl)ethers in the Elbe River and tributaries

Dedicated to Prof Dr. Dr. E. h. H. Sinn on the occasion of his 65th birthda     

Additive effects of vertebrate predators on insects in a Puerto Rican coffee plantation.

A variety of studies have established the value of shaded coffee plantations as habitat for birds. While the value of birds as biological controls in coffee has received some attention, the interactions between birds and other predators of insects have not been tested. We used exclosures to examine the effects of vertebrate predators on the arthropods associated with coffee, in particular the coffee leafminer (Leucoptera coffeella) and the flatid planthopper Petrusa epilepsis, in a shaded coffee plantation in Puerto Rico. We used a 2 x 2 factorial design with four treatments: exclusion of birds, lizards, birds and lizards, and control (no exclusion). Abundance of insects > 5 mm increased when birds or both birds and lizards were removed. Birds and lizards had an additive effect for insects < 5 mm and for all insects combined. Coffee leafminers showed a weak response to removal of predators while planthopper abundance increased significantly in the absence of avian predators. Arthropod predators and parasitoids did not differ significantly between treatments. Our findings suggest that vertebrate insectivores have an additive effect on insects in coffee and may help control abundances of some coffee pests. Equally important, we present evidence suggesting that they do not interfere with other known natural enemies of coffee pests.     

Wildfire policy and use of science in the context of a socio-ecological system on the Aegean Archipelago

This paper summarizes the results of a primarily qualitative (with certain quantitative elements) socio-ecological study on three Greek islands of the Aegean Archipelago to characterize fire science and policy at regional and local levels, and perceptions of fire risk. Among the most important factors influencing dynamics of fire regimes on the islands are changing land use patterns and practices, and changes in climate and fuel conditions. While use of scientific information is not widespread, there are individuals in all three islands who regularly consult scientific sources. Although fire policy is largely controlled at the national and European Union levels, local activity also occurs, most notably through the volunteer fire fighting organizations, interactions with local officials, and public education efforts. However, though seen as important, significant lack of financial support and resources exist to support prevention and pre-suppression programs. Prevention of fires on the islands, including the use of prescribed burning, is relatively inadequate, and while an intense interest in preventing the loss of communities and ecosystems is frequently encountered, public participation in fire prevention remains limited. The findings suggest that relying on local knowledge, in combination with fire managers’ decision-making abilities, could improve fire management options and reduce wildfire suppression costs and ecological disasters.     

Photocatalytic properties of hierarchical CuO nanosheets synthesized by a solution phase method

CuO nanomaterials were synthesized by a simple solution phase method using cetyltrimethylammonium bromide(CTAB) as a surfactant and their photocatalytic property was determined towards the visible-light assisted degradation of Reactive Black-5 dye. A detailed mechanism for the formation of CuO nanostructures has been proposed.The effect of various experimental parameters such as catalyst amount, dye concentration,p H and oxidizing agent on the dye degradation efficiency was studied. About 87% dye was degraded at p H 2 in the presence of CuO nanosheets under visible light. The enhanced photocatalytic activity of CuO nanosheets can be ascribed to good crystallinity, grain size,surface morphology and a strong absorption in the visible region. CuO is found to be a promising catalyst for industrial waste water treatment.