This paper summarizes developments made in the field of waste-to-energy technology between the 1980s and the present. In the USA, many waste-to-energy systems were developed in the 1980s and early 1990s. These plants generated power relatively efficiently (typically 23%) in 60 bar/ 443 degrees C boilers. Unfortunately, the development came to a stop when the US Supreme Court rejected the practice of waste flow control in 1994. Consequently, waste was directed to mega-landfills, associated with very negative environmental impacts. However, given landfill taxes and increased fuel prices, new waste-to-energy projects have recently been developed. Attractive premiums for renewable power production from municipal waste have been introduced in several European countries. This triggered important innovations in the field of improved energy recovery. Examples of modern waste-to-energy plants are Brescia and Amsterdam with net efficiencies of 24 and 30%, respectively. Incineration is traditionally preferred in Japan due to space constraints. New legislation promoted ash melting or gasification to obtain improved ash quality. However, these processes reduce the efficiency in terms of energy, cost and availability. A new oxygen-enriched waste-to-energy system is under development in order to better achieve the required inert ash quality. 相似文献
Environmental factors have long been shown to influence species distributions, with range limits often resulting from environmental
stressors exceeding organism tolerances. However, these abiotic factors may differentially affect species with multiple life-history
stages. Between September 2004 and January 2006, the roles of temperature and nutrient availability in explaining the southern
distributions of two understory kelps, Pterygophora californica and Eisenia arborea (Phaeophyceae, Laminariales), were investigated along the coast of California, USA and the Baja California Peninsula, Mexico,
by limiting either: (a) tissue nitrogen uptake and storage by adult sporophytes during periods of elevated temperature, and/or
(b) production of embryonic sporophytes by microscopic gametophytes. Results suggest that while adult sporophytes of both
species are tolerant of high temperatures and low nutrients, reproduction by their microscopic stages is not. Specifically,
while E. arborea produced embryonic sporophytes at both 12 and 18°C, temperatures commonly observed throughout the southern portion of its
range, P. californica produced sporophytes at 12 but not at 18°C. As a result, it appears that the southern distribution of P. californica, which ends in northern Baja California, Mexico, may be limited by temperature acting on its microscopic stages. In contrast,
the ability of E. arborea’s microscopic and adult stages to tolerate elevated temperatures allows it to persist in the warmer southern waters of Baja
California, as well as to the north along the California coast where both species co-occur. 相似文献
Tone River supplies most of the water requirements of the Tokyo Metropolitan Area (TMA). Lowering of Tone flow and yearly
fluctuation, however, is causing water shortage along TMA nowadays. This study investigated the future water availability
scenarios under climatic changes. A state-of-the-art approach to utilize the output of several GCM has been demonstrated to
investigate the future water availability scenarios for TMA from the Tone River. An integrated modeling approach for water
balance considering several hydrological risk indices was adopted to quantify the future changes in this case. It is observed
that the future summer precipitation along the Tone basin is going to be increased considerably, while an almost constant
or decreasing trend is observed for winter season. Natural flow availability for winter or spring seasons thus can be crucial
under future scenarios. After reservoir routing, the hydrological risk indices estimated, however, were not found to be changed
significantly due to the presence of a robust reservoir system at the upstream. 相似文献
The implementation of sustainable development may seem a simple concept when written on paper. However to carry-out long term
actions put forward by the Agenda 21 (AG21) at the local level represents one of the main challenges as municipal governments
in general do not have the capacity to effectively implement the process.
Regional environmental assessment (REA) has shown to be effective in supporting decision-making not only to correct environmental
problems due to past unsustainable social-economic developments but also help local governments to implement sustainable actions.
However this requires long-term investments of AG21 plans and projects. The allocation of regular and consistent financial
resources is one of the main ingredients for the sustainable development process. But traditional plans and projects financed
by national and/or international funds may not be sustainable in the long-term because they become dependent on external funding.
Research demonstrate that innovative economic instruments such as ecotaxes represent a feasible alternative to sponsor local
sustainability because taxes are collected permanently by the government and could be invested in continuous actions. Ecotaxes
experiences have provided important reference to structure a municipal incentive model (MIM) to sponsor AG21’s environmental
plans and projects on a long-term (permanent) basis.
However sustainable development cannot be solely through economic investments. A comprehensive municipal environmental management
scheme (MEMS) has been established to support the incentive model. The scheme seeks not only to improve local institutional
framework but also incentive continuous participation of local stakeholders at all levels of society. Participatory events
and the provision of incentives (educational and financial) are key to motivate society to protect the environment and support
actively the sustainable development process as emphasised in the RIO-92 Conference. 相似文献
Bombardier beetles (Coleoptera, Carabidae, Brachininae) possess a remarkable defense mechanism where a hot chemical spray is released from the tip of their abdomen, with an audible explosive sound. To date, the repellent properties of these chemicals have been tested against a limited number of taxa, such as amphibians and insects. To investigate the impact of bombardier beetle defenses on avian predators, feeding trials were conducted using the bombardier beetle (Pheropsophus jessoensis) and the Japanese quail (Coturnix japonica), a sympatric and generalist predator. All naïve, hand-reared quail attacked live beetles, indicating the absence of an innate aversion to them. However, most of the quail rejected consuming the beetles whether or not the beetles sprayed them with chemicals. Naïve quail also rejected dead P. jessoensis individuals. These results support the recent hypothesis that it is not essential for P. jessoensis to spray noxious chemicals to deter predators. We also found that some of the quail exposed to live P. jessoensis remembered to avoid them for up to 5 weeks. Our results provide the first evidence of the repelling effects of bombardier beetle defense mechanisms on avian predators.
Recently, the New Morris Method has been presented as an effective sensitivity analysis tool for mathematical models. The
New Morris Method estimates the sensitivity of an output parameter to a given set of input parameters (first-order effects)
and the extent these parameters interact with each other (second-order effects). This method requires the specification of
two parameters (runs and resolution) that control the sampling of the output parameter to determine its sensitivity to various
inputs. The criteria for these parameters have been set on the analysis of a well-behaved analytical function (see Cropp and
Braddock, Reliab. Eng. Syst. Saf. 78:77–83, 2002), which may not be applicable to other physical models that describe complex
processes. This paper will investigate the appropriateness of the criteria from (Cropp and Braddock, 2002) and hence the effectiveness
of the New Morris Method to determine the sensitivity behaviour of two hydrologic models: the Soil Erosion and Deposition
System and Griffith University Representation of Urban Hydrology. In the first case, this paper will separately analyse the
sensitivity of an output parameter on a set of input parameters (first- and second-order effects) for each model and discuss
the physical meaning of these sensitivities. This will be followed by an investigation into the sampling criteria by exploring
the convergence of the sensitivity behaviour for each model as the sampling of the parameter space is increased. By comparing
these trends to the convergence behaviour from Cropp and Braddock (2002), we will determine how well the New Morris Method
estimates the sensitivity for each model and whether the sampling criteria are appropriate for these models. It will be shown
that the New Morris Method can provide additional insight into the functioning of these models, and that, under a different
metric, the sensitivity behaviour of these models does converge confirming the sampling criteria set by Cropp and Braddock. 相似文献
A diffusive sampling method for the determination of methyl isocyanate (MIC) in air is introduced. MIC is collected using a glass fiber filter impregnated with 4-nitro-7-piperazinobenzo-2-oxa-1,3-diazole (NBDPZ). The urea derivative formed is desorbed from the filter with acetonitrile and analyzed by means of high-performance liquid chromatography (HPLC) using fluorescence detection (FLD) with lambdaex = 471 nm and lambdaex = 540 nm. Additionally, a method was developed using tandem mass spectrometric (MS-MS) detection, which was performed as selected reaction monitoring (SRM) on the transition [MIC-NBDPZ + H]+ (m/z 307) to [NBDPZ + H]+ (m/z 250). The diffusive sampler was tested with MIC concentrations between 1 and 35 microg m(-3). The sampling periods varied from 15 min to 8 h, and the relative humidity (RH) was set from 20% up to 80%. The sampling rate for all 15 min experiments was determined to be 15.0 mL min(-1) (using HPLC-FLD) with a relative standard deviation of 9.9% for 56 experiments. At 80% RH, only 15 min sampling gave acceptable results. Further experiments revealed that humidity did not affect the MIC derivative but the reagent on the filter prior to and during sampling. The sampling rate for all experiments (including long term sampling) performed at 20% RH was found to be 15.0 mL min(-1) with a relative standard deviation of 6.3% (N = 42). The limit of quantification was 3 microg m(-3) (LC-MS-MS: 1.3 microg m(-3)) for 15 min sampling periods and 0.2 microg m(-3) (LC-MS-MS: 0.15 microg m(-3)) for 8 h sampling runs applying fluorescence detection. 相似文献
The analysis for arsenic in hair is commonly used in epidemiological studies to assess exposure to this toxic element. However, poor correlation between total arsenic concentration in hair and water sources have been found in previous studies. Exclusive determination of endogenous arsenic in the hair, excluding external contamination has become an analytical challenge. Arsenic speciation in hair appears as a new possibility for analytical assessing in As-exposure studies. This study applied a relative simple method for arsenic speciation in human hair based on water extraction and HPLC-HG-ICP-MS. The concentration of arsenic species in human hair was assessed in chronically As(V)-exposed populations from two villages (Esqui?a and Illapata) of the Atacama Desert, Chile. The arsenic concentrations in drinking water are 0.075 and 1.25 mg L(-1), respectively, where As(V) represented between 92 and 99.5% of the total arsenic of the consumed waters. On average, the total arsenic concentrations in hair from individuals of Esqui?a and Illapata were 0.7 and 6.1 microg g(-1), respectively. Four arsenic species, As(III), DMA(V), MMA(V) and As(V), were detected and quantified in the hair extracts. Assuming the found species in extracts represent the species in hair, more than 98% of the total arsenic in hair corresponded to inorganic As. On average, As(III) concentrations in hair were 0.25 and 3.75 microg g(-1) in Esqui?a and Illapata, respectively; while, the As(V) average concentrations were 0.15 and 0.45 microg g(-1) in Esqui?a and Illapata, respectively. Methylated species represent less than 2% of the extracted As (DMA(V)+ MMA(V)) in both populations. As(III) in hair shows the best correlation with chronic exposure to As(V) in comparison to other species and total arsenic. In fact, concentrations of As(total), As(III) and As(V) in hair samples are correlated with the age of the exposed individuals from Illapata (R= 0.65, 0.69, 0.57, respectively) and with the time of residence in this village (R= 0.54, 0.71 and 0.58, respectively). 相似文献
Personal and area air samples were taken at a scrap lead smelter operation in a bullet manufacturing facility. Samples were taken using the 37-mm styrene-acrylonitrile closed-face filter cassette (CFC, the current US standard device for lead sampling), the 37-mm GSP or "cone" sampler, the 25-mm Institute of Occupational Medicine (IOM) inhalable sampler, and the 25-mm Button sampler (developed at the University of Cincinnati). Polyvinylchloride filters were used for sampling. The filters were pre- and post-weighed, and analyzed for lead content using a field-portable X-ray fluorescence (XRF) analyzer. The filters were then extracted with dilute nitric acid in an ultrasonic extraction bath and the solutions were analyzed by inductively coupled plasma optical emission spectroscopy. The 25-mm filters were analyzed using a single XRF reading, while three readings on different parts of the filter were taken from the 37-mm filters. The single reading from the 25-mm filters was adjusted for the nominal area of the filter to obtain the mass loading, while the three readings from the 37-mm filters were inserted into two different algorithms for calculating the mass loadings, and the algorithms were compared. The IOM sampler was designed for material collected in the body of the sampler to be part of the collected sample as well as that on the filter. Therefore, the IOM sampler cassettes were rinsed separately to determine if wall-loss corrections were necessary. All four samplers gave very good correlations between the two analytical methods above the limit of detection of the XRF procedure. The limit of detection for the 25-mm filters (5 microg) was lower than for the 37-mm filters (10 microg). The percentage of XRF results that were within 25% of the corresponding ICP results was evaluated. In addition, the bias from linear regression was estimated. Linear regression for the Button sampler and the IOM sampler using single readings and the GSP using all tested techniques for total filter loading gave acceptable XRF readings at loadings equivalent to sampling at the OSHA 8-hour Action Level and Permissible Exposure Limit. However, the CFC only had acceptable results when the center reading corrected for filter area was used, which was surprising, and may be a result of a limited data set. In addition to linear regression, simple estimation of bias indicated reasonable agreements between XRF and ICP results for single XRF readings on the Button sampler filters, (82% of the individual results within criterion), and on the IOM sampler filters (77% or 61%--see text), and on the GSP sampler filters using the OSHA algorithm (78%). As a result of this pilot project, all three samplers were considered suitable for inclusion in further field research studies. 相似文献