Viral Interference as a Factor of False-Negative in the Infectious Adenovirus Detection Using Integrated Cell Culture-PCR with a BGM Cell Line

Food and Environmental Virology - This study investigated the influence of viral interference on the detection of enteric viruses using the integrated cell culture (ICC)-PCR with a BGM cell line....     

Pathway of 17��-estradiol degradation by Nitrosomonas europaea and reduction in 17��-estradiol-derived estrogenic activity

In recent years, natural and synthetic estrogens have been recognized as endocrine disruptors in aquatic organisms. Although natural and synthetic estrogens are known to be degraded by microbes, only limited information about their degradation pathways is available. Here, we studied the degradation pathways of a natural estrogen, 17β-estradiol, by the nitrifying microorganism Nitrosomonas europaea, and we determined whether the degradation products of 17β-estradiol had estrogenic activity. To identify the degradation products, we subjected the culture solution to solid-phase extraction, and the extract was analyzed by gas chromatography–mass spectrometry. The potential estrogenic activity of the degradation products was investigated by means of a yeast two-hybrid assay. 1,3,5(10),16-Estratetraen-3-ol (estratetraenol) was newly identified as a degradation intermediate produced by dehydration of 17β-estradiol. Estratetraenol was also degraded by N. europaea, and its degradation rate was faster than that of 17β-estradiol. The two-hybrid assay confirmed that estratetraenol acted as a ligand for the estrogen receptor; estratetraenol thus has potential estrogenic activity. N. europaea eliminated the estrogenic activity derived from 17β-estradiol. This paper is the first to report dehydration as a mechanism of microbial estrogen degradation.     

Occurrence of Viruses and Protozoa in Drinking Water Sources of Japan and Their Relationship to Indicator Microorganisms

A nationwide survey of viruses, protozoa, and indicator microorganisms in drinking water sources of Japan was conducted. Among 64 surface water samples collected from 16 drinking water treatment plants, 51 (80?%) samples were positive for at least one of the 11 pathogen types tested, including noroviruses of genogroups I (positive rate, 13?%) and II (2?%), human sapoviruses (5?%), human adenoviruses of serotypes 40 and 41 (39?%), Cryptosporidium oocysts (41?%), and Giardia cysts (36?%). Total coliforms, Escherichia coli, and F-specific coliphages were detected in 63 (98?%), 33 (52?%), and 17 (27?%) samples, respectively, and E. coli was judged to be the most suitable indicator of pathogen contamination of drinking water sources. Genogroup-specific real-time PCR for F-specific coliphages revealed the presence of F-specific RNA coliphages of animal genogroup I and human genogroups II and III in 13 (41?%), 12 (39?%), and 1 (3?%), respectively, of 31 plaques isolated.     

Behavior of flames propagating through lycopodium dust clouds in a vertical duct

The structure of flame propagating through lycopodium dust clouds has been investigated experimentally. Upward propagating laminar flames in a vertical duct of 1800 mm height and 150×150 mm square cross-section are observed, and the leading flame front is also visualized using by a high-speed video camera. Although the dust concentration decreases slightly along the height of duct, the leading flame edge propagates upwards at a constant velocity. The maximum upward propagating velocity is 0.50 m/s at a dust concentration of 170 g/m³. Behind the upward propagating flame, some downward propagating flames are also observed. Despite the employment of nearly equal sized particles and its good dispersability and flowability, the reaction zone in lycopodium particles cloud shows the double flame structure in which isolated individual burning particles (0.5–1.0 mm in diameter) and the ball-shaped flames (2–4 mm in diameter; the combustion time of 4–6 ms) surrounding several particles are included. The ball-shaped flame appears as a faint flame in which several luminous spots are distributed, and then it turns into a luminous flame before disappearance. In order to distinguish these ball-shaped flames from others with some exceptions for merged flames, they are defined as independent flames in this study. The flame thickness in a lycopodium dust flame is observed to be 20 mm, about several orders of magnitude higher than that of a premixed gaseous flame. From the microscopic visualization, it was found that the flame front propagating through lycopodium particles is discontinuous and not smooth.     

构筑可持续发展的循环型社会体系

可持续发展社会的形成并不仅指单纯的物质循环,而是用生态学原理来调和社会和经济的发展,使社会·经济·环境都达成持续的生态平衡。通过论述日本循环型社会形成基本法等相关法律体系,分析了面向循环型经济社会建设的产业体系的发展方向,通过区域性循环社会的实践阐述了从循环型经济社会向可持续发展社会转变的重要意义。     

Woody biomass and RPF gasification using reforming catalyst and calcium oxide

This study focused on steam gasification and reforming of waste biomass using a reforming catalyst. The purpose of the study was to evaluate the durability of a commercial Ni reforming catalyst and the effect of CaO on the reforming behavior, and to clarify detailed factors of catalytic performance, as well as the effect of operating parameters on the characteristics of produced gas composition. Moreover, catalyst regeneration was carried out and the behavior of catalytic activity based on gas composition was investigated. Using a fluidized bed gasifier and a fixed bed reformer, gasification and reforming of waste biomass were carried out. Commercial Ni-based catalyst and calcined limestone (CaO) were applied to the reforming reaction. Temperature of the gasifier and reformer was almost 1023 K. Ratio of steam to carbon in the feedstock [mol mol⁻¹] and equivalence ratio (i.e., ratio of actual to theoretical amount of oxygen) [-] were set at about 2 and 0.3, respectively. The feed rate of the feedstock into the bench-scale gasifier was almost 15 kg h⁻¹. The results of waste biomass gasification confirmed the improvement in H₂ composition by the CO₂ absorption reaction using the reforming catalyst and CaO. In addition, CaO proved to be especially effective in decreasing the tar concentration in the case of woody biomass gasification. Catalytic activity was maintained by means of catalyst regeneration processing by hydrogen reduction after air oxidation when woody biomass was used as feedstock.     

土壤中苯向大气挥发过程的影响因素和通量特征研究

采用通量箱(30.0 cm×17.5 cm×29.0 cm)研究砂土与黑土中苯挥发过程中的影响因素和通量变化特征.通过模拟不同空气流速、不同温度,并设定土壤类型、土壤含水量、初始浓度等条件,实时监测通量箱中各层土壤气相中和土壤上方空气中苯的浓度,来分析不同条件下苯的挥发特征.结果表明,砂土和黑土中苯的挥发通量分别随着土壤含水量的增加而降低,土壤充气空隙率相近情况下,苯在砂土中的挥发通量明显高于黑土.空气流速在300~900 mL·min-1范围内,砂土中苯挥发通量随空气流速升高而加大;在20~40℃范围内对黑土的试验结果表明,苯挥发强度受温度影响显著.苯挥发通量与土壤中苯浓度呈线性相关,其可根据土壤中苯初始浓度和水溶出浓度进行预测.     

Nutrient dynamics and the eutrophication of shallow lakes Kasumigaura (Japan), Donghu (PR China), and Okeechobee (USA)

We compared the nutrient dynamics of three lakes that have been heavily influenced by point and non-point source pollution and other human activities. The lakes, located in Japan (Lake Kasumigaura), People's Republic of China (Lake Donghu), and the USA (Lake Okeechobee), all are relatively large (> 30 km2), very shallow (< 4 m mean depth), and eutrophic. In all three lakes we found strong interactions among the sediments, water column, and human activities. Important processes affecting nutrient dynamics included nitrogen fixation, light limitation due to resuspended sediments, and intense grazing on algae by cultured fish. As a result of these complex interactions, simple empirical models developed to predict in-lake responses of total phosphorus and algal biomass to external nutrient loads must be used with caution. While published models may provide 'good' results, in terms of model output matching actual data, this may not be due to accurate representation of lake processes in the models. The variable nutrient dynamics that we observed among the three study lakes appears to be typical for shallow lake systems. This indicates that a greater reliance on lake-specific research may be required for effective management, and a lesser role of inter-lake generalization than is possible for deeper, dimictic lake systems. Furthermore, accurate predictions of management impacts in shallow eutrophic lakes may require the use of relatively complex deterministic modeling tools.     

Contamination of butyltin and phenyltin compounds in the marine environment of Otsuchi Bay, Japan

Butyltin (BT) and phenyltin (PT) compounds were measured in seawater, sediment, and biological samples collected from coastal areas of Otsuchi Bay, Japan. Tributyltin (TBT) compounds in seawater, sediment, plankton, mussels, scallops and fish were in the range of 0.008-0.074 microg liter(-1), 0.01-0.64 mg (kg dry wt)(-1), 0.24-9.8 mg (kg dry wt)(-1), 0.04-0.18 mg (kg wet wt)(-1), 0.10-0.13 mg (kg wet wt)(-1) and 0.01-0.02 mg (kg wet wt)(-1), respectively. Trace amount of PTs were found in seawater. The highest concentrations of TBT and triphenyltin (TPT) were found near a shipyard. Triorganotin compounds were more dominant than their metabolites. A positive correlation was observed between the concentrations of TBT and TPT in the mussels. Concentrations of TBT and TPT in mussels were high in the upper intertidal zone, and decreased toward the water.     

Estimation of world trade for used automobiles

In order to provide the basic information for building an international automobile recycling system, this article attempts to estimate the multilateral trade for used automobiles. First, the problems in evaluation of the used automobile trade were clarified through the trade data obtained from the United Nations database (UN-DB) and the Global Trade Information Services database (GTI-DB). Furthermore, we developed an estimation method for the used automobile trade using the highlighted advantages of the UN-DB and GTI-DB. The reasons for employing this estimation method were to correct the systematic errors in both databases and to sample used automobile data from the UN-DB by using the new and used automobile information in the GTI-DB. The world trade volume for used passenger cars in 2005 was estimated by the method developed. These results indicated that total trade volume was 5.65 × 10⁶ vehicles, and that the exports from Germany, the United States, and Japan comprise 22%, 21%, and 20% of the global total, respectively. Moreover, the results indicate that these countries export used passenger cars not only to developing countries (54%), but also to developed countries (46%).