Influence of coexisting surface-active agents on leachability of dioxins in raw and treated fly ash from an MSW incinerator

The leaching behavior of dioxins from raw and treated fly ash (FA) under the coexistence of several types of surface-active agents (SAAs) was examined by batch leaching tests to obtain significant information not only for evaluating leachability of dioxins as hydrophobic organic pollutants (HOPs) under the severe environment in which SAAs coexist, but also for evaluating the reduction efficiency of dioxin-leachability from the treated FA. Enhancement of dioxin-leachability by sufficient addition of SAAs was observed in the leaching test, whereas addition of a smaller quantity depressed the leachability. The higher the degree of chlorination in PCDDs/PCDFs homologues, the more effectively the SAAs enhanced the leachability. Moreover, there was a large difference in the potential for leachability enhancement due to each surface activity, based on critical micelle concentration (CMC) of the SAAs although Aldrich humic acid enhanced the leachability at a much lower concentration than CMC. A comparison of the leachability in FA treated by several methods showed a difference in the reduction efficiency of leachability, depending on the adsorption of SAAs by each treated FA.     

Sensitivity analysis of radionuclide migration in compacted bentonite: a mechanistic model approach

Mechanistic model calculations for the migration of Cs, Ra, Am and Pb in compacted bentonite have been carried out to evaluate sensitivities with respect to different parameter variations. A surface chemical speciation/electric double layer model is used to calculate: (i) porewater composition and radionuclide speciation in solution and at the bentonite surface, yielding the distribution of mobile and sorbed species and (ii) interaction of diffusing species with negatively charged pore walls to obtain diffusion parameters. The basic scenario considers the interaction of compacted bentonite with a fresh-type groundwater; variations include the presence of bentonite impurities and saline groundwater. It is shown that these scenarios result in significant variations of porewater composition that affect migration via three mechanisms that can partly compensate each other: (1) effects on sorption through radionuclide complexation in solution, and competition of major cations for surface sites; (2) changes in radionuclide solution speciation leading to different diffusing species under different conditions; (3) effects on diffusion through changes in the electric double layer properties of the clay pores as a function of ionic strength.     

Leaching of brominated flame retardants in leachate from landfills in Japan

Leachate samples were taken from seven different landfills and concentrations of brominated flame retardants (BFRs), i.e. polybrominated diphenyl ethers (PBDEs) and tetrabromobisphenol A (TBBPA), were quantified. Leaching characteristics of BFRs, especially factors affecting leachability, were clarified to obtain basic information regarding the release of BFRs into the environment. The results obtained for observed levels of the sum of PBDE-47, -99 and -100 were n.d.--4000 pg/l for the raw leachate and n.d. for the treated one, respectively, and those of TBBPA were n.d.--620,000 pg/l for the raw leachate and n.d.--11,000 pg/l for the treated one, respectively. Three sites that not only had crushed material from bulk wastes such as waste electric and electronic equipment, but also were under operation or within a year since closure, indicated a higher concentration of BFRs than the other sites. In particular extremely high concentration of PBDEs was observed at a site with a large amount of organics. Considering the leaching characteristics of BFRs, there exists the possibility that leachability of PBDEs is influenced by the presence of dissolved humic matter (DHM) in the leachate. The high removal efficiency for BFRs in the leachate treatment process was also confirmed.     

Hydrometallurgical recovery of zinc from ashes of automobile tire wastes

Study has been performed on the investigation of metal leaching behavior for fly and bottom ashes from automobile tire wastes using acid and alkaline solutions from both viewpoints of environmental protection and resource utilization. The two ashes were found to contain substantial amounts of zinc and iron along with small quantities of cobalt, manganese, magnesium, copper, titanium and aluminum. The fly ash contained a much larger amount of zinc than the bottom ash, and seems to be a promising secondary source for the metal. Effects of such experimental parameters as temperature, time and solid-liquid ratio on the leaching behavior were investigated. Using three mineral acids and citric acid, selective leaching of zinc was successfully attained; the concentration of zinc in the leach liquors from the fly ash reached as high as 20 g l(-1) while the iron leaching was much suppressed. Selective separation of zinc was also attained in the leaching with alkaline solutions, though the percent leaching was lower than that in the acid leaching. Moreover, solvent extraction and precipitation were applied to the metal-loaded leach liquors as downstream processing to evaluate the feasibility of zinc recovery.     

Metabolism and body composition of a copepod (<Emphasis Type="Italic">Neocalanus cristatus</Emphasis>: Crustacea) from the bathypelagic zone of the Oyashio region,western subarctic Pacific

Metabolism [respiratory oxygen consumption, electron-transfer-system (ETS) activity] and body composition [water, ash, carbon (C), nitrogen (N), carbon/nitrogen (C/N) ratio] of stage C5/C6 Neocalanus cristatus from 1000 to 2000 m depth of the Oyashio region, western subarctic Pacific, were determined during the period of July 2000 through June 2003. Compared with the C5 specimens from shallow depths (<250 m), those from 1000 to 2000 m were characterized by quiescent behavior, reduced respiration rates (30% of the rates at active feeding), very low water content (61–70% of wet weight), but high C content (56–64% of dry weight) and C/N ratios (7.2–10.6, by weight). Artifacts due to the recovery of live specimens from the bathypelagic zone appeared to be unlikely in this study, as judged by the consistent results between re-compression (100 atm) and non-compression (1 atm) respiration experiments, and between ETS activities and respiration rates directly measured. In addition, the respiration rates of C6 males and females of N. cristatus from the same 1000–2000 m depth were two to three times higher than the rates of C5 individuals, but were similar to the rates of a bathypelagic copepod, Paraeuchaeta rubra. Combining these results with literature data, C budgets of: (1) diapausing C5 specimens, weighing 6–10 mg dry weight; (2) molt to C6 females; and (3) the complete the life span were established, taking into account assorted losses in respiration during diapause at stages C5 and C6, molt production and egg production. Respiratory C losses by C5 and C6 specimens were estimated on the basis of body N as adjusted metabolic rates [AMR; µl O₂ (mg body N)^–0.843 h^–1], then N budgets were also computed subtracting N lost in the form of cast molts and eggs from the initial stock. Calculations revealed that allocation of the C stock was greatest to egg production (34–57%), followed by respiration (27%) and cast molts (3%), leaving residual C of 13–36% in spent C6 females. The present results for N. cristatus from the North Pacific are compared with those of Calanus spp. in the North Atlantic.Communicated by O. Kinne, Oldendorf/Luhe     

Proximate composition of household waste and applicability of waste management technologies by source separation in Hanoi,Vietnam

The organic fraction of municipal solid wastes in Southeast Asia, which has a high moisture content, accounts for a large proportion of total waste. Local governments need to pay adequate attention to the composition of wastes to determine alternative waste management technologies. This study proposed the use of a triangle diagram to describe changes in proximate composition and rates of successful source separation of municipal solid waste and to identify technical challenges about alternative waste management technologies such as incineration, composting, and refuse-derived fuel production based on physical and proximate composition analysis of household waste sampled in Hanoi, Vietnam, as a case study. The analysis indicated the effectiveness of different types of source separation as well as different levels of successful achievement of source separation as an adjustment mechanism for the proximate composition of waste. Proper categorization of wastes for source separation is necessary for the appropriate use of alternative waste management technologies. The results showed that, at a source separation rate of just greater than 0.52 in a three-way separation scheme, the waste separated as combustible waste would be suitable for incineration with energy recovery. Based on well-designed schemes of source separation, alternative waste management technologies can be applied.     

Steady state of semi-continuous anaerobic digestion of cattle manure under the stress of adding iron and titanium oxide nanoparticles

Journal of Material Cycles and Waste Management - Anaerobic digestion (AD) is a sustainable technology that combines biogas production with proper waste management. However, the operation of an...     

Leaching characteristics of polybrominated diphenyl ethers (PBDEs) from flame-retardant plastics

To investigate the effect of leachant on the leachability of polybrominated diphenyl ethers (PBDEs), we determined the leaching concentrations of PBDEs from flame-retardant plastic samples (TV housings and raw materials before molding processing) that are regarded as a source of PBDEs in landfill sites. The leachants used were distilled water, 20% methanol solution, and dissolved humic solution (DHS) of 1000 mg/l based on organic carbon. The leaching test conditions were a liquid-to-solid ratio of 100:1, and a contact period of five days, with twice-daily agitation in a temperature-controlled room of 30 degrees C without pH or ionic strength control. The leaching concentrations of PBDEs increased with increased content, and were found to be remarkably enhanced when methanol and DHS were used instead of distilled water. The enhancement of leachability in the presence of the latter was attributed to the cosolvency effect, and complex formations between the PBDEs and dissolved humic matter (DHM). PBDE concentrations in the leachate obtained from the leaching test and an actual landfill site revealed a significant presence of congeners below heptabromodiphenyl ethers (H7BDEs), detected in the leachate of the actual landfill, while significant amounts of nonabromodiphenyl ethers (N9BDEs) and decabromodiphenyl ether (D10BDE) were detected in the leachate of the leaching test.     

Cementation vs mobility: development of a cemented byssus and flexible mobility in Anomia chinensis

The mobility of Anomia chinensis Philippi was studied in relation to its byssal development stage. This species shows high mobility even after it begins cementation in its post-larval stage. Juveniles develop a calcified byssus in the post-larval stage and cement to substrata. However, juveniles up to about 10 mm in shell length can relocate by repeating a sequence of formation of the calcified byssus, abandonment of it, locomotion by crawling, reattachment, and recementation. Juvenile anomiids up to 25 mm in shell length also can move, without breaking their byssal attachments, by shifting the center of byssal calcification dorsally. Even an adult can change its orientation by forming a twisted byssus. These possible methods of movement are closely related to five stages of byssal development. Anomiids can use this mobility to seek a preferable position for attachment after initial cementation, or to adjust their orientation, and thus promote higher survivorship. Received: 18 August 1997 / Accepted: 19 July 1998