Spawning migration and returning behavior of white-streaked grouper Epinephelus ongus determined by acoustic telemetry

White-streaked grouper (Epinephelus ongus) is an important fishery target that forms fish spawning aggregations (FSAs) at specific spawning grounds. The aims of the present study were to investigate migration behavior and returning behavior in terms of FSA using acoustic telemetry. Among the 30 specimens tracked, three types of movement pattern were observed: type 1, high site fidelity at the release area before the spawning period, migration to the spawning ground during the spawning period and return to the release area just after the spawning period (17 specimens); type 2, high site fidelity at the release area, disappearance from the area during the spawning period but was not detected at the spawning ground and return to the release area (8 specimens); and type 3, high site fidelity at the release area was observed before, during and after the spawning period (5 specimens). For the 17 specimens that were categorized into type 1, the dates of departure from their release area and the dates of return to the release area of males were, respectively, significantly earlier and later than those of females. The duration between the departure date and the return date (“duration away”) of males was significantly longer than that of females. The duration away tended to be positively related to the condition factor. All 25 specimens that were categorized as type 1 and type 2 showed returning behaviors to the release area.     

Measurements of aerosol optical properties in central Tokyo during summertime using cavity ring-down spectroscopy: Comparison with conventional techniques

A highly sensitive cavity ring-down spectrometer (CRDS) was used to monitor the aerosol extinction coefficient at 532 nm. The performance of the spectrometer was evaluated using measurements of nearly monodisperse polystyrene particles with diameters between 150 and 500 nm. By comparing the observed results with those determined using Mie theory, the accuracy of the CRDS instrument was determined to be >97%, while the upper limit for the precision of the instrument was estimated to be 0.6–3.5% (typically 2%), depending on the particle number concentration, which was in the range of 30–2300 particles cm^?3. Simultaneous measurements of the extinction (b_ext), scattering (b_sca) and absorption (b_abs) coefficients of ambient aerosols were performed in central Tokyo from 14 August to 2 September 2007 using the CRDS instrument, two nephelometers and a particle/soot absorption photometer (PSAP), respectively. The value of b_ext measured using the CRDS instrument was compared with the sum of the b_sca and b_abs values measured with a nephelometer and a PSAP, respectively. Good agreement between the b_ext and b_sca + b_abs values was obtained except for data on days when high ozone mixing ratios (>130 ppbv) were observed. During the high-O₃ days, the values for b_sca + b_abs were ～7% larger than the value for b_ext, possibly because the value for b_abs measured by the PSAP was overestimated due to interference from coexisting non-absorbing aerosols such as secondary organic aerosols.     

Vertical distribution, life cycle, and developmental characteristics of the mesopelagic calanoid copepod Gaidius variabilis (Aetideidae) in the Oyashio region, western North Pacific Ocean

Vertical distribution, life cycle, and developmental characteristics of the mesopelagic copepod Gaidius variabilis Brodsky in the Oyashio region were investigated by combining analyses of field copepodite populations with laboratory-rearing data of egg hatching and naupliar development. Field samplings from five discrete depths between the surface and ≤2000 m were made approximately every month for 1 year. Most populations of G. variabilis occurred between 600 and 1000 m depth. A modest degree of reversed diel vertical migration behavior and some stage-specific depth-distribution patterns were noted. All copepodite stages were observed throughout the year, suggesting a year-round spawning of G. variabilis. From a prominent abundance peak of Copepodite Stage 1 (C1) seen in June to August, together with development times of eggs and nauplii obtained in laboratory-rearing experiments, the major spawning season was extrapolated to be April to June, the phytoplankton bloom season. Tracing the peak abundance of each copepodite stage (distinguishing males and females for C4 to C6), the generation times of males and females were deduced as 2 and 1 year, respectively. All between-stage increments in terms of wet-, dry-, and ash-free dry weights were greatest in C3/C4, and least in C5/C6 for both males and females. The increments in C3/C4 and C4/C5 were greater for males than for females, reflecting a longer stage duration of the males. These weights did not increase in C5/C6 males, possibly because feeding ceased in C6 males. These results for G. variabilis are compared with those for some mesopelagic copepods previously reported from other regions. Received: 25 October 1999 / Accepted: 20 March 2000     

Feasibility study of the separation of chlorinated films from plastic packaging wastes

This study describes the possible separation of chlorinated plastic films (PVC and PVDC) from other heavy plastic packaging waste (PPW) by selective twist formation and gravity separation. Twists formation was mechanically induced in chlorinated plastic films, whereas twist formation did not occur in PS and PET films. After twist formation, all the films had the apparent density of less than 1.0 g/cm³ and floated in water even though the true density was more than 1.0 g/cm³. However, the apparent density of the PS and the PET films increased with agitation to more than 1.0 g/cm³, whereas that of chlorinated plastic films was kept less than 1.0 g/cm³. The main reason would be the air being held inside the chlorinated plastic films which was difficult to be removed by agitation. Simple gravity separation after twist formation was applied for artificial film with 10 wt.% of the chlorinated films and real PPW films with 9 wt.% of the chlorinated films. About 76 wt.% of the artificial PPW films and 75 wt.% of real PPW films after the removal of PP and PE were recovered as settling fraction with 4.7 wt.% and 3.0 wt.% of chlorinated plastic films, respectively. These results indicate that simple gravity separation process after twist formation can be used to reduce the chlorinated plastic concentration from mixed heavy PPW films.     

Estimating the amount of WEEE generated in South Korea by using the population balance model

We estimated the amount of waste electrical and electronic equipment (WEEE) generated in South Korea by using the population balance model (PBM) based on a lifespan distribution analysis. This is the first study to apply PBM to estimate WEEE generation in South Korea. The lifespan distribution analysis of electrical and electronic equipment (EEE) was based on the results of a questionnaire survey of 1000 households, which were analyzed with the Weibull distribution. As a result, we could estimate the domestic service lifespan and lifespan distribution shape parameter for eight selected products. Using the lifespan distribution analysis and other data, such as the shipment volume and the number of products owned by households, we estimated the amount of WEEE generated for the eight selected items from 2000 to 2020. We found that 1.2 million air conditioners, 2.5 million televisions, 1.3 million microwave ovens, 1.2 million kimchi refrigerators, 17.0 million mobile phones, 1.7 million refrigerators, 2.0 million vacuum cleaners, and 1.4 million washing machines were generated as WEEE in 2010. We also compared our WEEE estimates with the number of items collected through the official WEEE recycling program from 2003 to 2009 and found that in 2009 washing machines had the highest collection rate (28%) and air conditioners had the lowest rate (7%).     

Phosphate removal and recovery with a synthetic hydrotalcite as an adsorbent

Phosphate removal is important to control eutrophication and an ion exchange process is one of several treatment processes for this purpose. Hydrotalcite compounds (HTALs) are useful as adsorbents for phosphate removal because of their ion exchange properties. In this study, the adsorption properties of a granular synthetic HTAL for phosphate and the method of regeneration of the granular HTAL were examined. The adsorption isotherm of the granular HTAL was approximated by a modified Langmuir type, and the maximum adsorption capacity was 47.3 mg P g(-1), which corresponded to the content of HTAL in the granular one. Phosphate adsorbed on the HTAL was effectively desorbed with alkaline NaCl solutions and the HTAL was regenerated with 25 w/v% MgCl(2) solution. The regenerated HTAL could be reused repeatedly for the phosphate removal. Phosphate in the exhausted desorption solution was recovered as a precipitate of calcium phosphate by addition of CaCl(2), and the residual exhausted desorption solution could be also reused after supplying NaOH. The results suggest the possibility of an effective system for phosphate removal and recovery, which includes the following processes: adsorption, desorption, recovery of phosphate, and regeneration of the HTAL and the desorption solution.     

Development of new footwear sole surface pattern for prevention of slip-related falls

In this study, a new rubber surface pattern for a footwear sole was developed to prevent slip-related falls. This pattern shows a high static coefficient of friction (SCOF) and a high dynamic coefficient of friction (DCOF) when sliding against a liquid contaminated surface. A hybrid rubber block, in which a rubber block with a rough surface (Ra = 30.4 μm) was sandwiched between two rubber blocks with smooth surfaces (Ra = 0.98 μm), was prepared. The ratio of the rough surface area to the whole rubber block surface area r was 0%, 30%, 50%, 80%, and 100%. The coefficient of friction of the rubber blocks was measured when sliding against a stainless steel plate with Ra of 0.09 μm contaminated with a 90% aqueous solution of glycerol. While the SCOF increased with an increase of the rough surface area ratio r, the DCOF during steady-state sliding decreased with an increase of the rough surface area ratio r. The rough surface area ratio of 50% achieved a SCOF value around 0.5 or more and a DCOF value greater than 0.5. Furthermore, the difference in the value of the SCOF and DCOF was the smallest for the rubber block with r of 50%. The results indicated that the rubber block with r of 50% would be applicable to a footwear sole surface pattern to prevent slip and fall accidents on contaminated surfaces.     

Concentrations and hazard assessment of PCBs,organochlorine pesticides and mercury in fish species from the Upper Thames: river pollution and its potential effects on top predators

Aquatic environmental contamination levels of organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs) and heavy metals in the Upper Thames catchment area, UK were assessed on the basis of fish muscle analysis in wet weight, and their effects on top predators were assessed. The contamination levels of lead, cadmium, dichloro-diphenyl-trichloroethane (DDT) and its metabolites were found to be low (undetectable) in the area. Average mercury contamination level varied between 55 and 342 microg/kg, dieldrin between less than 0.09 and 36.8, lindane between < 0.08 and 4.94, and PCBs between < 0.77 and 3.32. Eels (Anguilla anguilla) had always much higher concentration of OCPs compared to the other fishes from the same monitoring sites. The environmental contamination level of PCBs may be partly associated with industrial and human activities, however, it was difficult to find such associations for mercury level. The hazard indices (HI) of both dieldrin and PCBs were below 1 for mink (Mustela vison). However, the HI of mercury of the all fish species from all monitoring sites are above 1 for mink. These contamination levels may be less harmful to polecats (Mustela putorius), but more so to otters (Lutra lutra) as their diets are dominated by aquatic prey.