Characterization of humic and fulvic acids extracted from landfill by elemental composition, 13C CP/MAS NMR and TMAH-Py-GC/MS

Humic acid (HA) and fulvic acid (FA) extracted from landfills at different landfill ages were characterized by elemental composition, (13)C CP/MAS NMR, and TMAH-Py-GC/MS. The elemental composition analysis revealed high O/C and low H/C ratios in the FA, indicating a high proportion of O-alkyl and carboxylic acids in the FA. The analytical results of (13)C CP/MAS NMR suggested that there were more oxygenated aliphatic carbons and fewer aromatic carbons in FA than in HA. The Py-GC/MS products showed that the HA and FA extracted from the refuse in the landfill were mainly composed of various lignin-derived compounds. Oxidized aromatic acid derivatives originated from the oxidation of side-chains of lignin-like compounds, and this process played a significant role in the process of HA and FA formation in the landfill. All of the results demonstrated that the degree of humification increased with landfill age.     

Decomposition of organochlorine compounds in flue gas from municipal solid waste incinerators using natural and activated acid clays

High-temperature particle control (HTPC) using a ceramic filter is a dust collection method without inefficient cooling and reheating of flue gas treatment; thus, its use is expected to improve the energy recovery efficiency of municipal solid waste incinerators (MSWIs). However, there are concerns regarding de novo synthesis and a decrease in the adsorptive removal efficiency of dioxins (DXNs) at approximately 300°C. In this study, the effect of natural and activated acid clays on the decomposition of monochlorobenzene (MCB), one of the organochlorine compounds in MSW flue gas, was investigated. From the results of MCB removal tests at 30–300°C, the clays were classified as adsorption, decomposition, and low removal types. More than half of the clays (four kinds of natural acid clays and two kinds of activated acid clays) were of the decomposition type. In addition, the presence of Cl atoms detached from MCB was confirmed by washing the clay used in the MCB removal test at 300°C. Activated acid clay was expected to have high dechlorination performance because of its proton-rich-composition, but only two clays were classed as decomposition type. Conversely, all the natural acid clays used in this work were of the decomposition type, which contained relatively higher di- and trivalent metal oxides such as Al₂O₃, Fe₂O₃, MgO, and CaO. These metal oxides might contribute to the catalytic dechlorination of MCB at 300°C. Therefore, natural and activated acid clays can be used as alternatives for activated carbon at 300°C to remove organochloride compounds such as DXNs. Their utilization is expected to mitigate the latent risks related to the adoption of HTPC, and also to contribute to the improvement of energy recovery efficiency of MSWI.

ImplicationsThe effect of natural and activated acid clays on MCB decomposition was investigated to evaluate their suitability as materials for the removal of organochlorine compounds, such as DXNs, from MSWI flue gas at approximately 300°C. More than half of the clays used in this study showed the decomposition characteristics of MCB. The presence of Cl atoms in the clay used in the MCB removal test at 300°C proved the occurrence of MCB decomposition. The results of this study suggest a novel flue gas treatment method to establish high-energy efficient MSWI systems.     

Separation and characterization of magnetic fractions from waste-to-energy bottom ash with an emphasis on the leachability of heavy metals

Environmental Science and Pollution Research - Magnetic fractions were extracted from pulverized waste-to-energy (WTE) bottom ashes using a combined wet-dry extraction method. The resulting...     

Oxidation of antimony(Ⅲ) in soil by manganese(Ⅳ) oxide using X-ray absorption fine structure

The oxidation of antimony(III) in soils was studied using X-ray absorption fine structure(XAFS)spectra.An andosol soil sample and artificial soil samples(SiO_2 blended with iron(III) hydroxide and manganese(IV) oxide) were used herein.After adding antimony(III) oxide to all soil samples,the oxidation process was observed by recording the XAFS spectra of Sb K-edge,Fe Kedge,and Mn K-edge.The results indicated that manganese(IV) oxide played an important role in the oxidation of Sb(III);however iron(III) hydroxide was not directly related to the reaction.During a 2-hr continuous Sb K-edge X-ray absorption near edge structure(XANES) measurement with an interval of 1 min of one of the artificial soil samples(SiO_2+ MnO_2+ Sb_2O_3),a pseudo-first-order reaction was determined with an average estimated rate of 0.52 ± 0.04 hr-1.Compared to the lower oxidation rate of andosol,it is suggested that because of the low concentration of Mn(IV) in natural soils,the oxidation process of Sb(III) might be relatively slow and require more time to convert Sb(III) to Sb(V).     

Characteristics of environmental factors and their effects on CH4 and CO2 emissions from a closed landfill: An ecological case study of Shanghai

To elucidate the influence of landfill gas (LFG) emission on environmental factors, an ecological investigation that was primarily concerned with the characteristics of vegetation, cover soil, and solid waste in the landfill was carried out. Temporal and spatial variations in vegetation diversity and coverage and their effects on reducing the emission of methane in the landfill were investigated. The results showed that both vegetation coverage and diversity increased with elapsed landfill closure time. The transition trend of the vegetation species was from perennial plant (Phragmites australis) to annual plants. Perennial vegetation was the dominant type of vegetation during the early closure period, and annual vegetation coverage increased with closure time. Vegetation preferentially appeared in areas of comparatively high depth of cover soil, which was characterized by high moisture retentiveness that enabled vegetation growth. The concentrations of methane and carbon dioxide in the cover soil significantly decreased with increasing closure time. The concentrations of methane and carbon dioxide from bare cover soil were higher than those from vegetated cover soil whereas the CO₂ flux of bare cover soil was less than that of vegetated cover soil.     

Numerical investigation for pressure mitigation effects of dike on blast wave

The three-dimensional and two-dimensional axisymmetric fluid dynamics simulations were carried out to clarify the blast pressure mitigating effects of dike’s configuration in hemispherical explosion. The simulated peak overpressure on the ground under the hemispherical explosion was compared with the empirical formula by Kingery, and the simulated data were validated. In the analysis, the simplification techniques for the numerical simulation were employed under the following two assumptions. The pressure distribution behind the wide dike was estimated using the axisymmetric flowfield, and the back step model was applied under the small condition for θ, the angle formed by the ground and the line between the explosion core and the dike front corner. From the simulated results, it is clarified that the large θ provided the great reduction of the blast wave pressure at faraway position. In the small θ condition, the conditions of the dike end position and the dike height were significant parameters determining the magnitude of pressure reduction and mitigated area. The pressure reduction at the dike end and mitigated area were predicted numerically, and related to the dike conditions.     

Leaching of heavy metals in acid mine drainage.

Acid mine drainage is one of the most serious environmental problems that the coal and metal mining industry is currently facing. The generation of low pH drainage enhances the dissolution of heavy metals in water. The samples used in this research originated from three pits at mine dumps. In a study reported in this paper, three types of tests; namely static test, kinetic test and column test were conducted to estimate acid generation and acid neutralization reaction rates, and to predict the solubility of metals and their release rates. Static test showed that all samples had a pH of net acid generation (NAG pH) <4, a net acid producing potential (NAPP) >10 kg H2SO4tonne(-1), and a S-content >3%, which can be classified as a high acid-forming capacity. Simulated runoff in the column tests was equivalent to 5-year average rainfall in Indonesia, the resultant leachates showed acidic behaviour (pH < 3.5). Based on the results, it was found that high mobilization of heavy metals (Cr, Cu, Zn, Cd and Pb) takes place under strong acidic conditions (pH approximately equal 2).     

The role of metals in dioxin formation from combustion of newspapers and polyvinyl chloride in an incinerator

Newspapers impregnated with NaCl mixed with various chloride metals (CuCl2, MgCl2, MnCl2, FeCl3, NiCl2, and CoCl2) and electric wire coated with polyvinyl chloride (PVC) were combusted in a well-controlled incinerator. Exhaust gas samples collected at the outlet of the incinerator were analyzed for dioxins (PCDDs, PCDFs, and coplanar PCBs) by gas chromatography/mass spectrometry. The amount of total dioxins formed from newspaper samples ranged from 34.2 ng/g (with NaCl+CoCl2) to 67.0 ng/g (with NaCl+CuCl2). PCDFs composed 88-94% of the total dioxins formed in the exhaust gases. The highest levels of PCDF isomers obtained were Cl3-CDF from the sample with NaCl+CuCl2 (14.8 ng/g), Cl2-CDF from the sample with NaCl+MgCl2 (12.3 ng/g), and Cl(1)-CDF from samples with NaCl+MnCl2 (12.6 ng/g), with NaCl+FeCl3 (11.8 ng/g), and with NaCl+NiCl2 (13.3 ng/g), and with NaCl+CoCl2 (8.62 ng/g). The total of Cl4-8-CDDs comprised 76-88% of the total Cl1-8-CDDs. In particular, Cl7-CDDs had the highest levels except for the sample with NaCl+NiCl2. Total dioxins formed from samples of electric wire coated with PVC and PVC alone were 38.3 ng/g and 112 ng/g, respectively, suggesting that the presence of copper reduced dioxin formation.     

Influence of H<Subscript>2</Subscript> on the decomposition of halides by nonthermal plasma incorporated with in situ alkaline absorption

To control the emission of halides into the environment, an experiment on the nonthermal plasma decomposition of the halides CF₄, CHF₃, C₂HCl₃, and CHClF₂ was conducted in a wire-in-tube corona reactor. It was found that the decomposition of C₂HCl₃ and CHClF₂ was easy compared with the decomposition of CF₄ and CHF₃. With the addition of H₂ in N₂ gas, the decomposition ratio of CF₄, C₂HCl₃, and CHClF₂ increased. In contrast, the decomposition ratio of CHF₃ in a hydrogen-rich atmosphere was lower than that in an N₂ atmosphere. It was demonstrated that the yields of HF and/or HCl formed during halide decomposition clearly increased in the presence of H₂ in N₂ gas. Furthermore, in order to prevent the production of unwanted products from halide decomposition, a combination of plasma decomposition and in situ alkaline absorption was devised by coating a layer of Ca(OH)₂ onto the surface of the grounding electrode. It was demonstrated that the Ca(OH)₂ sorbent played an effective role as a scavenger, participating in halide decomposition by capturing reaction products such as HCl and HF, therefore resulting in increased halide decomposition.