RISK ASSESSMENT METHODOLOGY FOR KARST AQUIFERS: (2) SOLUTE-TRANSPORT MODELING

Ground-water flow and solute-transport simulation modeling are major components of most exposure and risk assessments of contaminated aquifers. Model simulations provide information on the spatial and temporal distributions of contaminants in subsurface media but are difficult to apply to karst aquifers in which conduit flow is important. Ground-water flow and solute transport in karst conduits typically display rapid-flow velocities, turbulent-flow regimes, concentrated pollutant-mass discharge, and exhibit open-channel or closed-conduit flow. Conventional ground-water models, dependent on the applicability of Darcy`s law, are inappropriate when applied to karst aquifers because of the (1) nonapplicability of Darcian-flow parameters, (2) typically nonlaminar flow regime, and (3) inability to locate the karst conduits through which most flow and contaminant transport occurs. Surface-water flow and solute-transport models conditioned on a set of parameters determined empirically from quantitative ground-water tracing studies may be effectively used to render fate-and-transport values of contaminants in karst conduits. Hydraulic-flow and geometric parameters developed in a companion paper were used in the surface-water model, TOXI5, to simulate hypothetical slug and continuous-source releases of ethylbenzene in a karst conduit. TOXI5 simulation results showed considerable improvement for predicted ethylbenzene-transport rates and concentrations over qualitative tracing and analytical ground-water model results. Ethylbenzene concentrations predicted by TOXI5 simulations were evaluated in exposure and risk assessment models.     

Optimal charges on river effluent from lumped and distributed sources

We propose a modelling framework for the design of a Pigouvian effluent tax, in an environmental management problem implicating several economic agents located in a river basin. The proposed charging system allows for the agents' geographical position relative to the river's sections, at which environmental standards are to be enforced, and takes into account the possible different market structures within which the agents are operating. In particular, we consider industrial agents competing on an oligopolistic market, and a set of farmers acting as price takers on a large market. A regional authority's goal is to induce agents to some sort of cooperation which would result in the satisfaction of the common environmental constraints. The economic process on one side, and the pollution transport and accumulation on the other, constitute two dynamic processes in two different time scales. As the economic process is much slower than the other process we can neglect the latter's transients and concentrate on the time invariant steady state solutions to the transportation equation. The model thus constructed has some noncooperative game and optimal control problem's features with space being the ‘running’ variable. This revised version was published online in July 2006 with corrections to the Cover Date.     

Study of Meteorological Aspects and Urban Concentration of SO2 in Atmospheric Environment of La Plata, Argentina

This article presents and discusses SO₂ (ppbv) concentration measurements combined with meteorological data (mainly wind speed and direction) for a five-year campaign (1996 to 2000), in a site near an oil refinery plant close to the city of La Plata and surroundings (aprox. 740.000 inh.), considered one of the six most affected cities by air pollution in the country. Since there is no monitoring network in the area, the obtained results should be considered as medium term accumulated data that enables to determine trends by analyzing together gas concentrations and meteorological parameters. Preliminary characterization of the behaviour of the predominant winds of the region in relation with potential atmospheric gas pollutants from seasonal wind roses is possible to carry out from the data. These results are complemented with monthly averaged SO₂ measurements. In particular, for year 2000, pollutant roses were determined which enable predictions about contamination emission sources. As a general result we can state that there is a clear increase in annual SO₂ concentration and that the selected site should be considered as a key site for future survey monitoring network deployment. Annual SO₂ average concentration and prevailing seasonal winds determined in this work, together with the potential health impact of SO₂ reveals the need for a comprehensive and systematic study involving particulate matter an other basic pollutant gases.     

Modeling rhizofiltration: heavy-metal uptake by plant roots

The discovery of phytoaccumulation potential of plant species has led to its application for remediation of heavy-metal-contaminated soil and wastewater, which is termed as phytoextraction/rhizofiltration. For prediction, analysis, planning and cost-effective design of such systems, mathematical models not only are used as a screening tool but also provide optimal parameters like harvesting time, irrigation schedule, etc. Several laboratory and field scale studies have been carried out in the past, and mathematical expressions have been developed by various researchers for different phenomena like metal adsorption in soil, plant root growth with time, moisture and metal uptake by plant root, moisture movement in unsaturated zone, soil moisture relationship, etc. The complete design of any such phytoremediation program would require the knowledge of behavior of heavy-metal movement in soil, water and plant root system. In this paper, a model for simulating heavy-metal dynamics in soil, water and plant root system is developed and discussed. The governing non-linear partial differential equation is solved numerically by implicit finite difference method using Picard's iterative technique, and the formulation has been illustrated using a characteristic example. The source code is written in MATLAB.     

Modeling of non-point source pollution in a Mediterranean drainage basin

SWAT ver. 2000 was used to predict hydrographs, and sediment, nitrate and total phosphorus loadings from a 1349 km² mountainous/agricultural watershed in Northern Greece. The model was calibrated and verified using continuous meteorological data from eight stations within the drainage area, and runoff, sediment and nutrient concentrations measured at nine stations located within the main tributaries of the watershed, for the time period from May 1st, 1998 to January 31st, 2000. Model validation methodology and resulting input parameters appropriate for Mediterranean drainage basins are presented. Predicted by the model hydrographs, sedimentographs and pollutographs are plotted against observed values and show good agreement. Model performance is evaluated using the root mean square error computation and scattergrams of predicted versus observed data. The validated model is also used to test the effectiveness of three alternative cropping scenarios in reducing nutrient loadings from the agricultural part of the watershed. The study showed that this model, if properly validated, can be used effectively in testing management scenarios in Mediterranean drainage basins.     

Nonstationary, long memory and anti-persistence in several climatological time series data

In this article we examine the stochastic behaviour of several daily datasets describing sun (total irradiance at the top of the atmosphere and sunspot numbers) and various climatological anomaly series by looking at their orders of integration. We use a testing procedure that permits us to consider fractional degrees of integration. The tests are valid under general forms of serial correlation and deterministic trends and do not require estimation of the fractional differencing parameter. Results show that the series are all nonstationary, with increments that might be stationary for those variables affecting sun, and anti-persistent for those affecting air temperatures.     

Hydropower production and river rehabilitation: A case study on an alpine river

Despite the numerous benefits of hydropower production, this renewable energy source can have serious negative consequences on the environment. For example, dams act as barriers for the longitudinal migration of organisms and transport of particulate matter. Accelerated siltation processes in the receiving river reduce the vertical connectivity between river and groundwater. Hydropeaks, caused by short-term changes in hydropower operation, result in a negative impact on both habitat and organisms, especially during winter months when natural discharge is low and almost constant. In this study, we report the current deficits present in the River Rhone from two different scientific perspectives – fish ecology and hydrology. Potential rehabilitation solutions in synergy with flood protection measures are discussed. We focus on the effects of hydropeaking in relation to longitudinal and vertical dimensions and discuss local river widening as a potential rehabilitation tool. The fish fauna in the Rhone is characterized by a highly unnatural structure (low diversity, impaired age distribution). A high correlation between fish biomass and monotonous morphology (poor cover availability) was established. Tracer hydrology provided further details about the reduced permeability of the riverbank, revealing a high degree of siltation with K values of about 4.7 × 10^?6 m s^?1. Improving the hydrologic situation is therefore essential for the successful rehabilitation of the Rhone River. To this end, hydropeaks in the river reaches must be attenuated. This can be realized by a combination of different hard technical and soft operational measures such as retention reservoirs or slower up and down ramping of turbines.     

Documentation of cumulative impacts in environmental impact statements

The National Environmental Policy Act (NEPA) of 1969 and the Council on Environmental Quality (CEQ) regulations in the United States require federal agencies to apply an environmental impact assessment (EIA) in decision-making related to their actions. One aspect requires an examination of direct, indirect and cumulative impacts (CIs). Historically, cumulative impact assessment (CIA) has been given limited attention in EIA and resultant environmental impact statements (EISs), not because of its lack of importance, but owing to limitations in methodologies and procedures, including documentation consistency. The objectives of this study were to identify deficiencies in the documentation of CIs and CIA in EISs and to formulate appropriate recommendations (potential solutions) related to such deficiencies. The study involved the systematic review of 33 EISs (11 each from the U.S. Department of Agriculture: Forest Service, the U.S. Army Corps of Engineers, and the U.S. Department of Transportation: Federal Highway Administration). The results indicate that improvements have been made in documentation practices since 1990; however, inconsistencies and inadequacies still exist. Therefore, the following recommendations were developed: (1) CIs should be reported in a separate part of the “Environmental Consequences” section, and they should be addressed for each pertinent environmental resource; (2) a summary of CIs should be included; (3) any CIs considered not significant should be mentioned plus the reason(s) for their non-significance; (4) spatial and temporal boundaries addressed within the CIA process should be defined for pertinent environmental resources; and (5) utilized guidelines and methodologies should be described.     

A dynamic statistical experiment for atmospheric interactions

Interactions among atmospheric parameters exist at different scales. The pristine approach for observational or model data analysis involves changing the input parameters one at a time (OAT) and studying the effect on the system. Limitations of this approach for atmospheric applications are discussed. A fractional factorial (FF) based study is evolved and a methodology is outlined involving dynamic graphical analysis. Observational data from the FIFE and HAPEX‐MOBILHY experiments are utilized with a vegetation and soil moisture scheme dynamically coupled in a planetary boundary layer model to demonstrate the robustness of this approach. Both low‐resolution and high‐resolution designs are considered. Various aspects of the vegetation‐atmosphere interactions are delineated. Results obtained from the interaction‐based FF approach differ considerably from the earlier OAT‐type studies.     

Trends in motor-vehicle related air pollutants in central London

Results of intermittent monitoring of six aromatic hydrocarbons (benzene, toluene, ethyl-benzene, m-xylene, p-xylene and o-xylene), carbon monoxide and oxides of nitrogen over a thirteen year period at a site in central London (Exhibition Road) are presented. Four monitoring regimes were undertaken; namely, 1979, 1982/83, 1986/87 and 1991/92. The summertime daytime mean ambient concentrations of the measured parameters at this site are presented. The reported concentrations show a reduction from 1979 to 1992 by approximately a factor of two, despite national increases in motor fuel consumption and the volume of traffic. Relevant European Community legislation covering emissions from motor-vehicles are outlined and comparisons are made with emissions from motor vehicles predicted from the UK national inventory. The importance of the frequency of measurements was also noted.