The potential leaching and mobilization of trace elements from FGD-gypsum of a coal-fired power plant under water re-circulation conditions

Experimental and geochemical modelling studies were carried out to identify mineral and solid phases containing major, minor, and trace elements and the mechanism of the retention of these elements in Flue Gas Desulphurisation (FGD)-gypsum samples from a coal-fired power plant under filtered water recirculation to the scrubber and forced oxidation conditions. The role of the pH and related environmental factors on the mobility of Li, Ni, Zn, As, Se, Mo, and U from FGD-gypsums for a comprehensive assessment of element leaching behaviour were also carried out. Results show that the extraction rate of the studied elements generally increases with decreasing the pH value of the FGD-gypsum leachates. The increase of the mobility of elements such as U, Se, and As in the FGD-gypsum entails the modification of their aqueous speciation in the leachates; UO₂SO₄, H₂Se, and HAsO₂ are the aqueous complexes with the highest activities under acidic conditions. The speciation of Zn, Li, and Ni is not affected in spite of pH changes; these elements occur as free cations and associated to SO₄ ² in the FGD-gypsum leachates. The mobility of Cu and Mo decreases by decreasing the pH of the FGD-gypsum leachates, which might be associated to the precipitation of CuSe₂ and MoSe₂, respectively. Time-of-Flight mass spectrometry of the solid phase combined with geochemical modelling of the aqueous phase has proved useful in understanding the mobility and geochemical behaviour of elements and their partitioning into FGD-gypsum samples.     

Electroremediation part II: A study of the movement of heavy metals during an electroremediation process in Andisol soil

In the Summer 2004 issue of Remediation, the authors presented a study of the influence of buffering behavior in contaminated Andisol soil. This article, Part II, expands on this research by presenting the results of laboratory tests conducted to study the movement of heavy metals in contaminated Andisol soil during the first stage of an electrochemical remediation process. The analysis was performed on the soil after treatment and also on the washing solutions collected during the first four hours. In order to analyze the effectiveness of fast and simple techniques for monitoring the electroremediation process, computer‐aided modeling of speciation in the soil solution was performed in connection with the remediation treatment. The results show that the metals moved mainly as positive species in the soil and later occurred as insoluble forms relative to the pH value in the washing solution from the cathode chamber. © 2005 Wiley Periodicals, Inc.     

Monitoring of heavy metal concentrations in home outdoor air using moss bags

One monitoring station is insufficient to characterize the high spatial variation of traffic-related heavy metals within cities. We tested moss bags (Hylocomium splendens), deployed in a dense network, for the monitoring of metals in outdoor air and characterized metals’ long-term spatial distribution and its determinants in Girona, Spain. Mosses were exposed outside 23 homes for two months; NO₂ was monitored for comparison. Metals were not highly correlated with NO₂ and showed higher spatial variation than NO₂. Regression models explained 61-85% of Cu, Cr, Mo, Pb, Sb, Sn, and Zn and 72% of NO₂ variability. Metals were strongly associated with the number of bus lines in the nearest street. Heavy metals are an alternative traffic-marker to NO₂ given their toxicological relevance, stronger association with local traffic and higher spatial variability. Monitoring heavy metals with mosses is appealing, particularly for long-term exposure assessment, as mosses can remain on site many months without maintenance.     

Mercury, lead and cadmium in human milk in relation to diet, lifestyle habits and sociodemographic variables in Madrid (Spain)

Background

Although breastfeeding is the ideal way of nurturing infants, it can be a source of exposure to toxicants. This study reports the concentration of Hg, Pb and Cd in breast milk from a sample of women drawn from the general population of the Madrid Region, and explores the association between metal levels and socio-demographic factors, lifestyle habits, diet and environmental exposures, including tobacco smoke, exposure at home and occupational exposures.

Methods

Breast milk was obtained from 100 women (20 mL) at around the third week postpartum. Pb, Cd and Hg levels were determined using Atomic Absorption Spectrometry. Metal levels were log-transformed due to non-normal distribution. Their association with the variables collected by questionnaire was assessed using linear regression models. Separate models were fitted for Hg, Pb and Cd, using univariate linear regression in a first step. Secondly, multivariate linear regression models were adjusted introducing potential confounders specific for each metal. Finally, a test for trend was performed in order to evaluate possible dose-response relationships between metal levels and changes in variables categories.

Results

Geometric mean Hg, Pb and Cd content in milk were 0.53 μg L⁻¹, 15.56 μg L⁻¹, and 1.31 μg L⁻¹, respectively. Decreases in Hg levels in older women and in those with a previous history of pregnancies and lactations suggested clearance of this metal over lifetime, though differences were not statistically significant, probably due to limited sample size. Lead concentrations increased with greater exposure to motor vehicle traffic and higher potato consumption. Increased Cd levels were associated with type of lactation and tended to increase with tobacco smoking.

Conclusions

Surveillance for the presence of heavy metals in human milk is needed. Smoking and dietary habits are the main factors linked to heavy metal levels in breast milk. Our results reinforce the need to strengthen national food safety programs and to further promote avoidance of unhealthy behaviors such as smoking during pregnancy.     

Cooperative behavior and social organization of the Swallow-tailed Manakin (Chiroxiphia caudata)

Summary The mating system of the Swallow-tailed Manakin (Chiroxiphia caudata) is a type of non-resource based polygyny in which males aggregate at traditional sites or leks to perform cooperative displays. Each lek and all its contained courts are used communally by a group of 4–6 males. Within the group a linear dominance hierarchy exists. Position in the hierarchy persists within and between years and at all courts and is inherited in linear sequence. The dominant male of the group behaves as a sentinel calling repeatedly from a high perch in an attempt to attract females to a court.When a female arrives, two or three males engage in a cooperative precopulatory dance, the Jump Display. This is followed by a Solo Precopulatory Display performed by a single male who, if successful, will copulate with the female. With rare exception, the dominant male performs all Solo Displays and all copulations.Display sequences that include both a Jump Display and Solo Precopulatory Display are more likely to lead to copulation than those consisting of only one part. Thus, the subordinates who help the dominant perform the dance are expending energy that increases his fitness without receiving any immediate benefit themselves. Several factors that may have contributed to the evolution of the mating system and cooperative displays of this species are considered.     

Flammability of Some Ornamental Species in Wildland–Urban Interfaces in Southeastern France: Laboratory Assessment at Particle Level

Assessment of the flammability of ornamental vegetation (particularly hedges) planted around houses is necessary in light of the increasing urbanization of the wildland–urban interfaces (WUIs) and the high fire occurrence in such areas. The structure and flammability of seven of the species most frequently planted as hedges in Provence (southeastern France) were studied at particle level. Spatial repartition of the different types of fuel particles within plants was assessed by means of the cube method. The leaf flammability was assessed using an epiradiator as a burning device, and measurements of foliar physical characteristics and gross heat of combustion (GHC) helped to explain the results of burning experiments. Co-inertia analysis revealed that species with thin leaves were quick to ignite (Pyracantha coccinea, Phyllostachys sp.) and species with high leaf GHC burned the longest (Pittosporum tobira, Nerium oleander). Species presenting high ignitability (Photinia fraseri, Phyllostachys sp. and Pyracantha coccinea) were characterized by high foliar surface area-to-volume ratio, and species presenting lower ignitability were characterized by high GHC (Pittosporum tobira, Nerium oleander, Cupressus sempervirens). Hierarchical cluster analysis of the flammability variables (ignition frequency, time-to-ignition and flaming duration) categorized the relative flammability of the seven species (including dead Cupressus sempervirens) in five clusters of species from poorly flammable (Pittosporum tobira) to extremely flammable (dead Cupressus sempervirens).This study provides useful information for reducing fire risk in WUIs in the study area.     

Spatial heterogeneity of PM10 and O3 in São Paulo, Brazil, and implications for human health studies

Developing exposure estimates is a challenging aspect of investigating the health effects of air pollution. Pollutant levels recorded at centrally located ambient air quality monitors in a community are commonly used as proxies for population exposures. However, if ample intraurban spatial variation in pollutants exists, city-wide averages of concentrations may introduce exposure misclassification. We assessed spatial heterogeneity of particulate matter with an aerodynamic diameter < or = 10 microm (PM10) and ozone (O3) and evaluated implications for epidemiological studies in S?o Paulo, Brazil, using daily (24-hr) and daytime (12-hr) averages and 1-hr daily maximums of pollutant levels recorded at the regulatory monitoring network. Monitor locations were also analyzed with respect to a socioeconomic status index developed by the municipal government. Hourly PM10 and O3 data for the Sāo Paulo Municipality and Metropolitan Region (1999-2006) were used to evaluate heterogeneity by comparing distance between monitors with pollutants' correlations and coefficients of divergence (CODs). Both pollutants showed high correlations across monitoring sites (median = 0.8 for daily averages). CODs across sites averaged 0.20. Distance was a good predictor of CODs for PM10 (p < 0.01) but not O3, whereas distance was a good predictor of correlations for O3 (p < 0.01) but not PM10. High COD values and low temporal correlation indicate a spatially heterogeneous distribution of PM10. Ozone levels were highly correlated (r > or = 0.75), but high CODs suggest that averaging over O3 levels may obscure important spatial variations. Of municipal districts in the highest of five socioeconomic groups, 40% have > or = 1 monitor, whereas districts in the lowest two groups, representing half the population, have no monitors. Results suggest that there is a potential for exposure misclassification based on the available monitoring network and that spatial heterogeneity depends on pollutant metric (e.g., daily average vs. daily 1-hr maximum). A denser monitoring network or alternative exposure methods may be needed for epidemiological research. Findings demonstrate the importance of considering spatial heterogeneity and differential exposure misclassification by subpopulation.     

Characterization of acute toxicity,genotoxicity, and oxidative stress of dimethoate in Rhinella arenarum larvae

Environmental Science and Pollution Research - There is a great concern worldwide about the global decline of amphibians, particularly by agrochemical pollution. The aim of this study was to assess...     

Water Vapour Transport in Biopolymeric Materials: Effects of Thickness and Water Vapour Pressure Gradient on Yeast Biomass-Based Films

Journal of Polymers and the Environment - Biopolymer-based films are hydrophilic biodegradable matrices that exhibit poor water vapour barrier. Ideally, water vapour permeability does not depend on...     

Influence of RFID tags on recyclability of plastic packaging

The use of Radio Frequency IDentification Technology (RFID) in the packaging sector is an important logistical improvement regarding the advantages offered by this technology in comparison with barcodes. Nevertheless, the presence of these devices in plastic packaging, and consequently in plastic waste, can cause several problems in the recycling plants due to the materials included in these devices.In this study, the mentioned recycling constraints have been experimentally identified in a pilot scale recycling study consisting in three recycling tests with an increasing presence of RFID tags. Differences in each test were evaluated. Furthermore, the quality of the recycled material of each test was studied through the injection and testing of tests probes.The results of the pilot scale recycling tests did not show a decrease in the quality of the recycled plastic due to the presence of RFID tags. Nevertheless, several operational problems during the recycling process were observed such as the obstruction of the screens, which lessened the process yield and created process interruptions, as well as the loss of extruded plastic during the process.These recycling constraints cannot be directly extrapolated to the industrial plants due to the different working scales. Nevertheless, technological solutions are proposed in order to avoid these recycling constraints if they appear.