The determinants of support levels for wind energy in the European Union. An econometric study

The aim of this paper is to identify the factors that drive support levels for wind on-shore electricity in the Member States of the European Union (EU) with the help of econometric techniques. The econometric analysis is based on cross-section linear regressions with ordinary least squares. Four alternative specifications of the model have been estimated. The estimates comply with the basic hypotheses of the lineal model, i.e., absence of multicollinearity, accurate functional form, homokedasticity and normality in the distribution of errors. Thus, the estimations are unbiased, efficient and consistent. The results show that countries with higher wind energy generation costs have higher support levels. The higher support levels in countries with higher carbon intensities suggest that wind energy deployment is regarded as effective to mitigate carbon emissions. The type of support scheme also influences support levels, with feed-in tariffs leading to lower levels of support than other instruments. In addition, a general good investment climate in the country makes higher support levels less necessary, stressing the importance of lowering risks in order to reduce support levels and, thus, financial transfers from consumers to producers. Thus, providing stable regulatory frameworks should be a priority of policy-makers. The rest of variables (renewable energy resource potentials, administrative barriers, energy import dependency, interest rates, share of wind energy in total electricity generation as a proxy of lobbying pressures and electricity demand) are not statistically significant in most specifications and some of them do not have the expected sign.     

Comparison of European national legislation efficiency on the reduction of air pollutant emissions

Since 1995, the Institute for Environment and Development in Portugal has obtained >300 stack samples from various point sources of Portuguese industries. A coherent database was made with the collected results. The limit values fixed by several European legal documents consulted, Portuguese, Spanish, French, Italian, and Dutch emission legislation, were applied to the Institute for Environment and Development stack sampling inventory (from 1995 to 2000) to evaluate the efficiency of these standards in promoting the control and reduction of atmospheric pollutants emissions, especially regarding nitrogen oxides, sulfur dioxide, and particulate matter. The conclusion was that the original Portuguese legislation was not restrictive enough and not very efficient regarding emissions reduction. In contrast, the Dutch and Italian legislations are quite restrictive but very efficient concerning emission control for the three pollutants analyzed. One of the outcomes of this study was the publication of a new law in Portugal regulating the emissions of atmospheric pollutants. The strategy of this emissions control law follows the conclusions found in this study including the concept of a mass flow threshold and different approaches depending on source dimension.     

Radioactivity in trinitite six decades later

The first nuclear explosion test, named the Trinity test, was conducted on July 16, 1945 near Alamogordo, New Mexico. In the tremendous heat of the explosion, the radioactive debris fused with the local soil into a glassy material named Trinitite. Selected Trinitite samples from ground zero (GZ) of the test site were investigated in detail for radioactivity. The techniques used included alpha spectrometry, high-efficiency gamma-ray spectrometry, and low-background beta counting, following the radiochemistry for selected radionuclides. Specific activities were determined for fission products (90Sr, 137Cs), activation products (60Co, 133Ba, 152Eu, 154Eu, 238Pu, 241Pu), and the remnants of the nuclear fuel (239Pu, 240Pu). Additionally, specific activities of three natural radionuclides (40K, 232Th, 238U) and their progeny were measured. The determined specific activities of radionuclides and their relationships are interpreted in the context of the fission process, chemical behavior of the elements, as well as the nuclear explosion phenomenology.     

Effects of Illegal Harvest of Eggs on the Population Decline of Leatherback Turtles in Las Baulas Marine National Park,Costa Rica

Abstract: Within 19 years the nesting population of leatherback turtles (Dermochelys coriacea) at Parque Nacional Marino Las Baulas declined from 1500 turtles nesting per year to about 100. We analyzed the effects of fishery bycatch and illegal harvesting (poaching) of eggs on this population. We modeled the population response to different levels of egg harvest (90, 75, 50, and 25%) and the effect of eradicating poaching at different times during the population decline. We compared effects of 90% poaching with those of 20% adult mortality because both of these processes were present in the population at Las Baulas. There was a stepwise decline in number of nesting turtles at all levels of egg harvest. Extirpation times for different levels of poaching ranged from 45 to 282 years. The nesting population declined more slowly and survived longer with 20% adult mortality (146 years) than it did with 90% poaching (45 years). Time that elapsed until poaching stopped determined the average population size at which the population stabilized, ranging from 90 to 420 nesting turtles. Our model predicted that saving clutches lost naturally would restore the population when adult mortality rates were low and would contribute more to population recovery when there were short remigration intervals between nesting seasons and a large proportion of natural loss of clutches. Because the model indicated that poaching was the most important cause of the leatherback decline at Las Baulas, protecting nests on the beach and protecting the beach from development are critical for survival of this population. Nevertheless, the model predicted that current high mortality rates of adults will prevent population recovery. Therefore, protection of the beach habitat and nests must be continued and fishery bycatch must be reduced to save this population.     

CENTRIFUGE MODELING OF ONE-DIMENSIONAL SUBSURFACE CONTAMINATION1

ABSTRACT: One-dimensional contaminant transport through a saturated soil is modeled using a 1.2-m radius geotechnical centrifuge. Small-scale physical modeling in the centrifuge is achieved in relatively short time, at stress distributions that are similar to those experienced in the prototype (actual site). A 0.05 mol/l of sodium chloride solution is used as a contaminant and conductivity cells measure the concentration of the contaminant throughout the porous medium. Scaling analysis for centrifuge modeling and 1-g modeling are briefly discussed and it is concluded that centrifuge modeling simulates the effect of molecular diffusion; however, scaling of the effect of mechanical dispersion may be violated in the centrifuge if the interstitial fluid velocity is high. Centrifuge test results show good agreement with the predicted relationship between the coefficient of hydrodynamic dispersion and the Peclet number using column tests. Centrifuge modeling can be used as a complement of numerical modeling although the effect of mechanical dispersion may be overestimated in the former.     

Preserving Population Allele Frequencies in Ex Situ Conservation Programs

Abstract: Optimization of contributions of parents to progeny by minimizing the average coancestry of the progeny is an effective strategy for maintaining genetic diversity in ex situ conservation programs, but its application on the basis of molecular markers has the negative collateral effect of homogenizing the allelic frequencies at each locus. Because one of the objectives of a conservation program is to preserve the genetic composition of the original endangered population, we devised a method in which markers are used to maintain the allele frequency distribution at each locus as closely as possible to that of the native population. Contributions of parents were obtained so as to minimize changes in allele frequency for a set of molecular markers in a population of reduced size. We used computer simulations, under a range of scenarios, to assess the effectiveness of the method in comparison with methods in which contributions of minimum coancestry are sought, either making use of molecular markers or genealogical information. Our simulations indicated that the proposed method effectively maintained the original distribution of allele frequencies, particularly under strong linkage, and maintained acceptable levels of genetic diversity in the population. Nevertheless, contributions of minimum coancestry determined from pedigree information but ignoring the genealogy previous to the conservation program, was the most effective method for maintaining allelic frequencies in realistic situations.     

Adsorption behavior of α -cypermethrin on cork and activated carbon

Studies were undertaken to determine the adsorption behavior of α -cypermethrin [R)-α -cyano-3-phenoxybenzyl(1S)-cis-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate, and (S)-α-cyano-3-phenoxybenzyl (1R)-cis-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate] in solutions on granules of cork and activated carbon (GAC). The adsorption studies were carried out using a batch equilibrium technique. A gas chromatograph with an electron capture detector (GC-ECD) was used to analyze α -cypermethrin after solid phase extraction with C18 disks. Physical properties including real density, pore volume, surface area and pore diameter of cork were evaluated by mercury porosimetry. Characterization of cork particles showed variations thereby indicating the highly heterogeneous structure of the material. The average surface area of cork particles was lower than that of GAC. Kinetics adsorption studies allowed the determination of the equilibrium time—24 hours for both cork (1–2 mm and 3–4 mm) and GAC. For the studied α -cypermethrin concentration range, GAC revealed to be a better sorbent. However, adsorption parameters for equilibrium concentrations, obtained through the Langmuir and Freundlich models, showed that granulated cork 1–2 mm have the maximum amount of adsorbed α-cypermethrin (q_m) (303 μg/g); followed by GAC (186 μ g/g) and cork 3-4 mm (136 μg/g). The standard deviation (SD) values, demonstrate that Freundlich model better describes the α -cypermethrin adsorption phenomena on GAC, while α -cypermethrin adsorption on cork (1-2 mm and 3-4 mm) is better described by the Langmuir. In view of the adsorption results obtained in this study it appears that granulated cork may be a better and a cheaper alternative to GAC for removing α -cypermethrin from water.     

The new challenges of end-of-life tyres management systems: A Spanish case study

Directive 2008/98/EC released by the European Union represents a significant step forward in all relevant aspects of waste management. Under the already established, extended produced responsibility (EPR) principle, new policies have been enunciated to continuously achieve better overall environmental performance of key products throughout their life phases. This paper discusses how the directive is being articulated in Spain by the main integrated management system (IMS) for end-of-life (EOL) tyres since its creation in 2006. Focusing on the IMS technological, economic and legal aspects, the study provides a global perspective and evaluation of how the IMS is facing the current issues to resolve, the new challenges that have appeared and the management vision for the coming years.