Load of Heavy Metals in the Airborne Dust Particulates of an Urban City of Central India

The geographical and temporal distribution patterns of airborne dust particulates have been studied in different representative areas of Raipur City. Dust fall samples from different sites were collected and some selected toxic metals namely Cr, Mn, Fe, Ni, Cu, Zn, Sb and Pb in them were determined by AAS. Total annual flux of 11.7, 541.4, 2751.0, 14.2, 9.8, 90.9, 17.6, and 17.7 kg km(-2) y(-1) were measured for Cr, Mn, Fe, Ni, Cu, Zn, Sb, and Pb respectively. The occurrence of metal concentration were generally in the order industrial > heavy traffic > commercial > residential area in Raipur city. The results of analysis show the existence of toxic metal concentration in the order Fe > Mn > Zn > Pb approximately Sb > Ni > Cr > Cu in Raipur city. These large levels of metal pollutants have also been correlated with some meteorological parameters like temperature, relative humidity and wind velocity, and strong positive correlations have been observed.     

Flood problems in Bangladesh: Is there an indigenous solution?

Bangladesh, situated on the delta of the Ganges, the Brahmaputra, and the Meghna rivers, experiences two distinct types of inundations: (a) river floods resulting from excessive runoff contributed by monsoon precipitation and (b) coastal floods induced by storm surges of tropical cyclones. The river floods are normal annual events and human settlements and agricultural practices have adapted admirably well to their regimes. Abnormal floods that occur once in every few years cause serious damage to crops and properties. To minimize flood losses, a number of modern engineering projects have been constructed within Bangladesh. However, the successful solution of the problem would probably require some international collaboration for basinwide unified systems planning, since large parts of the drainage basins of Bangladesh lie beyond its borders. In the absence of such collaboration, internal resources should be utilized for the construction of smaller public projects, such aspolders, and for encouraging and reinforcing various types of indigenous adjustments to floods. There are very few successful indigenous adjustments to coastal floods. Most of the structural solutions, such as community shelters and higher embankments, are expensive public projects that are probably beyond the means of the internal resources of the country.     

OPTIMIZING NONPOINT SOURCE CONTROLS IN WATER QUALITY REGULATION1

ABSTRACT: A stochastic programming framework is developed to evaluate the economic implications of reliability criteria and multiple effluent controls on nonpoint source pollution. An integrated watershed simulation model is used to generate probability distributions for agricultural effluents in surface and ground water resulting from agricultural practices. Results from the planning model indicate that reliability and multiple effluent constraints significantly increase the cost of nonpoint controls but the effects vary by control alternative. The analysis indicates that an evaluation of multiple water quality objectives can be an important planning tool for designing nonpoint source controls for innovative programs to promote cost-effective water quality regulation.     

PM<Subscript>2.5</Subscript> pollution from household solid fuel burning practices in Central India: 2. Application of receptor models for source apportionment

USEPA’s UNMIX, positive matrix factorization (PMF) and effective variance-chemical mass balance (EV-CMB) receptor models were applied to chemically speciated profiles of 125 indoor PM_2.5 measurements, sampled longitudinally during 2012–2013 in low-income group households of Central India which uses solid fuels for cooking practices. Three step source apportionment studies were carried out to generate more confident source characterization. Firstly, UNMIX6.0 extracted initial number of source factors, which were used to execute PMF5.0 to extract source-factor profiles in second step. Finally, factor analog locally derived source profiles were supplemented to EV-CMB8.2 with indoor receptor PM_2.5 chemical profile to evaluate source contribution estimates (SCEs). The results of combined use of three receptor models clearly describe that UNMIX and PMF are useful tool to extract types of source categories within small receptor dataset and EV-CMB can pick those locally derived source profiles for source apportionment which are analog to PMF-extracted source categories. The source apportionment results have also shown three fold higher relative contribution of solid fuel burning emissions to indoor PM_2.5 compared to those measurements reported for normal households with LPG stoves. The previously reported influential source marker species were found to be comparatively similar to those extracted from PMF fingerprint plots. The comparison between PMF and CMB SCEs results were also found to be qualitatively similar. The performance fit measures of all three receptor models were cross-verified and validated and support each other to gain confidence in source apportionment results.     

Vertical distribution and contamination assessment of heavy metals in sediment cores of ship breaking area of Bangladesh

Environmental Geochemistry and Health - Vertical heavy metal profiling reflects the history of the deposition of metals and helps to understand the characteristics of accumulation in various layers...     

Removal of mercury(II) from aqueous solutions using the leaves of the Rambai tree (Baccaurea motleyana)

This study was undertaken to evaluate the biosorption potential of a natural, low-cost biosorbent, Rambai leaves (Baccaurea motleyana), to remove trace amounts of Hg(II) from aqueous solutions. It was found that the amount of Hg(II) biosorption by Rambai leaves increased with initial metal ion concentration, contact time, and solution pH but decreased as the amount of biosorbent increased. The maximum biosorption capacity was 121.95 mg/g for an initial concentration range of 5 to 120 ppb. Overall, kinetic studies showed that the Hg(II) biosorption process followed pseudo-second-order kinetics based on pseudo-first-order and intraparticle diffusion models. Isotherm data revealed that the biosorption process followed both Freundlich and Langmuir isotherms. The value of separation factor, R(L), from the Langmuir equation and rate of biosorption, n, from the Freundlich model also indicated favorable adsorption.     

Purifying arsenic and fluoride-contaminated water by a novel graphene-based nanocomposite membrane of enhanced selectivity and sustained flux

Environmental Science and Pollution Research - A novel graphene-based nanocomposite membrane was synthesized by interfacial polymerization (IP) through chemical bonding of the graphene oxide (GO)...     

Lead Levels in the Airborne Dust Particulates of an Urban City of Central India

The dust fall-out rate, distribution pattern andconcentration of lead in the particulate fall-outmatters in urban Raipur city covering an area of 160 km² during one hydrological year i.e. November1996–June 1997, has been described. The entire cityhas been divided into 6 zones comprising ofindustrial, commercial, residential and heavy trafficareas. A monthly collection and analysis of dustfall-out rate between 3.0(±0.1) and91.3(±1.2) metric tonnes km^-2 month^-1 wereobserved at all 6 sampling sites. The total annualflux of lead in the fall-out of the city at differentzones is in the range 0.0065–0.4304 kg km^-2yr^-1. The results show that dust fall-out and thelead levels both are at higher magnitudes in winterand autumn. These large levels of air pollutants havealso been correlated with some meteorological parameters like relative humidity and temperature, and strong positive correlations have been observed.     

In-vitro toxicity of cyclophosphamide and etoposide intermediates/metabolites produced by three white rot fungi

Aim of the present study is to determine the in-vitro cell cytotoxic effect of native and transformed cancer drugs (cyclophosphamide and etoposide) using three different white rot fungi (Ganoderma lucidum, Phanerochaete chrysosporium and Trametes versicolor). At 3, 6, 9, 12 and 15 days, experiments were done on a mouse monocyte macrophage cell line (Raw 264.7). After biodegradation, the altered compounds were found to be harmful to the Raw 264.7 cells. The maximal cytotoxicity of cyclophosphamide transformed products (TPs) were determined to be 2.4%, 7.3% and 7% respectively, against G. lucidum, P. chrysosporium and T. versicolor, respectively. With G. lucidum, P. chrysosporium and T. versicolor, the etoposide toxicity was 1.5%, 8% and 2.7% respectively. P. chrysosporium-mediated biodegradation resulted in the maximum toxicity, at 8%, on the 12th day for etoposide and 7.3% on the 3rd day for cyclophosphamide. After biodegradation by fungi, the toxicity of these two anticancer agents was reduced in the form of metabolites, but each fungus showed unique capacity for toxicity removal.