Simultaneous removal of Cu(II) and Cr(VI) by Mg–Al–Cl layered double hydroxide and mechanism insight

Mg–Al–Cl layered double hydroxide (Cl-LDH) was prepared to simultaneously remove Cu(II) and Cr(VI) from aqueous solution. The coexisting Cu(II) (20 mg/L) and Cr(VI) (40 mg/L) were completely removed within 30 min by Cl-LDH in a dosage of 2.0 g/L; the removal rate of Cu(II) was accelerated in the presence of Cr(VI). Moreover, compared with the adsorption of single Cu(II) or Cr(VI), the adsorption capacities of Cl-LDH for Cu(II) and Cr(VI) can be improved by 81.05% and 49.56%, respectively, in the case of coexisting Cu(II) (200 mg/L) and Cr(VI) (400 mg/L). The affecting factors (such as solution initial pH, adsorbent dosage, and contact time) have been systematically investigated. Besides, the changes of pH values and the concentrations of Mg²⁺ and Al³⁺ in relevant solutions were monitored. To get the underlying mechanism, the Cl-LDH samples before and after adsorption were thoroughly characterized by X-ray powder diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. On the basis of these analyses, a possible mechanism was proposed. The coadsorption process involves anion exchange of Cr(VI) with Cl⁻ in Cl-LDH interlayer, isomorphic substitution of Mg²⁺ with Cu²⁺, formation of Cu₂Cl(OH)₃ precipitation, and the adsorption of Cr(VI) by Cu₂Cl(OH)₃. This work provides a new insight into simultaneous removal of heavy metal cations and anions from wastewater by Cl-LDH.     

Simulated reaction of formaldehyde and ambient atmospheric particulate matter using a chamber

The reaction of HCHO with Beijing winter's real ambient particulate matter(PM) inside a 3.3 m~3 Teflon Chamber was conducted in this study. NO_2, O_3 and H_2O gases were removed from the ambient aerosol before entering into the chamber. The decays of HCHO were monitored(acetylacetone spectrophotometry method) during the reactions at different PM number concentrations(N_a) and relative humidities(RHs), and the formed particulate formate was detected by IC and XPS techniques. The results showed that when RH was10%–15%, the decay rate of HCHO in the chamber was higher with the existence of PM from relatively clean days(with number concentration(N_a) 200,000 particle/L, 0.35–22.5 μm)compared to dirty days(N_a 200,000 particle/L, 0.35–22.5 μm). When RH increased to 30%–45%, PM can hardly have significant influences on the decay of HCHO. The formations of formate on the reacted PM were consistent with the HCHO decay rates at different ambient PM N_aand RH conditions. This is a first study related to the "real" ambient PM reacted with HCHO and suggested that in the clean and low RH days, PM could be an effective medium for the conversion of HCHO to formate.     

Capability of cation exchange technology to remove proven N-nitrosodimethylamine precursors

N-nitrosodimethylamine(NDMA) precursors consist of a positively charged dimethylamine group and a non-polar moiety, which inspired us to develop a targeted cation exchange technology to remove NDMA precursors. In this study, we tested the removal of two representative NDMA precursors, dimethylamine(DMA) and ranitidine(RNTD), by strong acidic cation exchange resin. The results showed that pH greatly affected the exchange efficiency, with high removal(DMA 78% and RNTD 94%) observed at pH pk_a-1 when the molar ratio of exchange capacity to precursor was 4. The exchange order was obtained as follows: Ca~(2+) Mg~(2+) RNTD~+ K~+ DMA~+ NH_4~+ Na~+. The partition coefficient of DMA~+to Na~+was 1.41 ± 0.26, while that of RNTD~+to Na~+was 12.1 ± 1.9. The pseudo second-order equation fitted the cation exchange kinetics well. Bivalent inorganic cations such as Ca~(2+)were found to have a notable effect on NA precursor removal in softening column test. Besides DMA and RNTD, cation exchange process also worked well for removing other 7 model NDMA precursors. Overall, NDMA precursor removal can be an added benefit of making use of cation exchange water softening processes.     

美国市政污水处理排放标准制定对中国的启示

在概述美国市政污水处理排放标准制度体系的基础上,介绍了其制定基于技术的排放限值和基于水质的排放限值的方法,阐述了其制定的科学性,并指出了中国市政污水处理排放标准中存在的相应问题。最后,根据美国制定排放标准限值的经验,对我国污水处理排放标准进行了思考,并提出了科学制定排放标准的方法和建议。     

人工快渗一体化设备在农村污水处理中的应用

针对农村污水的特点,结合湖北十堰地区农村污水处理工程案例,分析了以人工快渗技术为核心的一体化设备在实际应用中的运行效果和工艺优势。经过实际运行监测,工程处理出水主要水质指标可达到GB 18918—2002《城镇污水处理厂污染物排放标准》一级A排放标准,并且该工艺设备具有运行成本低、抗冲击负荷能力强、运行管理方便等优点,可有效地解决目前农村地区由于资金、技术、人才等因素限制造成的污水处理能力低和管理水平低的问题,是一种适合我国农村地区污水处理的工艺设备。     

AOX contamination status and genotoxicity of AOX-bearing pharmaceutical wastewater

Adsorbable organic halogens(AOX) are a general indicator for the total amount of compounds containing organically bonded halogens. AOX concentrations and components were investigated along the wastewater treatment process in four large-scale pharmaceutical factories of China, and genotoxicity based on the SOS/umu test was also evaluated. The results showed that AOX concentrations in wastewater of four factories ranged from 4.6 to 619.4 mg/L, which were high but greatly different owing to differences in the raw materials and products. The wastewater treatment process removed 50.0%–89.9% of AOX, leaving 1.3–302.5 mg/L AOX in the effluents. Genotoxicity levels ranged between 2.1 and 68.0 μg 4-NQO/L in the raw wastewater and decreased to 1.2–41.2 μg 4-NQO/L in the effluents of the wastewater treatment plants(WWTPs). One of the main products of factory I, ciprofloxacin, was identified as the predominant contributor to its genotoxicity. However, for the other three factories, no significant relationship was observed between genotoxicity and detected AOX compounds.     

On the effect of Fe(III) on proliferation of Microcystis aeruginosa at high nitrate and low chlorophyll condition

The impact of Fe concentrations on the growth of Microcystisaeruginosa in aquatic systems under high nitrate and low chlorophyll conditions was studied. The responses of cell density, total and cell chlorophyll-a intracellular Fe content and organic elemental composition of M. aeruginosa to different concentration gradients of Fe(III) in the solutions were analysed. The results showed that the proliferation speeds of M. aeruginosa were: (1) decelerated when the Fe(III) concentration was lower than 50 μg/L in the solutions, (2) promoted and positively related to the increase of Fe(III) concentration from 100 to 500 μg/L in the solutions over the experimental period, and (3) promoted in the early stage but decelerated in later stages by excess adsorption of Fe by cells when the Fe(III) concentration was higher than 500 μg/L in the solutions. The maximum cell density, total and cell chlorophyll-a were all observed at 500 μg Fe(III)/L concentration. The organic elemental composition of M. aeruginosa was also affected by the concentration of Fe(III) in the solutions, and the molecular formula of M. aeruginosa should be expressed as C_7–7.5H₁₄O_0.8–1.3N_3.5–5 according to the functions for different Fe(III) concentrations. Cell carbon and oxygen content appeared to increase slightly, while cell nitrogen content appeared to decrease as Fe(III) concentrations increased from 100 to 500 μg/L in the solutions. This was attributed to the competition of photosynthesis and nitrogen adsorption under varying cell Fe content.     

Bioaccumulation and the expression of hepatic cytochrome P450 genes in marine medaka (Oryzias melastigma) exposed to difenoconazole

This study was conducted to assess the effects of difenoconazole (DFZ), a triazole fungicide, on the hepatic biotransformation system and its bioaccumulation in marine medaka (Oryzias melastigma). Fish were exposed to DFZ (1, 10, 100, 1000 ng/L) for 180 days. The results showed that: (1) The mRNA levels of hepatic CYP1A1, CYP1B, CYP1C1, CYP27B and CYP3A40 were up-regulated, but those of CYP3A38 and CYP27A1 were down-regulated. (2) The activity of ethoxyresorufin-O-deethylase (EROD) and the content of reduced glutathione (GSH) in the liver were increased in the DFZ-treated groups, and glutathione S-transferase (GST) activity was increased in the 100 and 1000 ng/L groups. (3) DFZ was accumulated in the muscle and the biological concentration factors in the 10, 100, and 1000 ng/L groups were respectively 149, 81 and 25. These results suggested that long-term exposure to DFZ at low concentrations would result in a bioaccumulation of this compound and disturb the biotransformation system.     

Effects of sludge retention time, carbon and initial biomass concentrations on selection process: From activated sludge to polyhydroxyalkanoate accumulating cultures

Four sequence batch reactors (SBRs) fed by fermented sugar cane wastewater were continuously operated under the aerobic dynamic feeding (ADF) mode with different configurations of sludge retention time (SRT), carbon and initial biomass concentrations to enrich polyhydroxyalkanoate (PHA) accumulating mixed microbial cultures (MMCs) from municipal activated sludge. The stability of SBRs was investigated besides the enrichment performance. The microbial community structures of the enriched MMCs were analyzed using terminal restriction fragment length polymorphism (T-RFLP). The optimum operating conditions for the enrichment process were: SRT of 5 days, carbon concentration of 2.52 g COD/L and initial biomass concentration of 3.65 g/L. The best enrichment performance in terms of both operating stability and PHA storage ability of enriched cultures (with the maximum PHA content and PHA storage yield (Y_PHA/S) of 61.26% and 0.68 mg COD/mg COD, respectively) was achieved under this condition. Effects of the SRT, carbon concentration and initial biomass concentration on the PHA accumulating MMCs selection process were discussed respectively. A new model including the segmentation of the enrichment process and the effects of SRT on each phase was proposed.     

Determination of 15 phthalate esters in air by gas-phase and particle-phase simultaneous sampling

Based on previous research, the sampling and analysis methods for phthalate esters (PAEs) were improved by increasing the sampling flow of indoor air from 1 to 4 L/min, shortening the sampling duration from 8 to 2 hr. Meanwhile, through the optimization of chromatographic conditions, the concentrations of 9 additional PAE pollutants in indoor air were measured. The optimized chromatographic conditions required a similar amount of time for analysis as before, but gave high responsivity, the capability of simultaneously distinguishing 15 kinds of PAEs, and a high level of discrimination between individual sample peaks, as well as stable peak generation. The recovery rate of all gas-phase and particle-phase samples of the 15 kinds of PAEs ranged from 91.26% to 109.42%, meeting the quantitative analysis requirements for indoor and outdoor air sampling and analysis. For the first time, investigation of the concentration levels as well as characteristics of 15 kinds of PAEs in the indoor air from four different traffic micro-environments (private vehicles, busses, taxis and subways) was carried out, along with validation of the optimized sampling and analytical method. The results show that all the 9 additional PAEs could be detected at relatively high pollution levels in the indoor air from the four traffic micro-environments. As none of the pollution levels of the 15 kinds of PAEs in the indoor air from the 4 traffic micro-environments should be neglected, it is of great significance to increase the types of PAEs able to be detected in indoor air.