Preparation of a new Fenton-like catalyst from red mud using molasses wastewater as partial acidifying agent

Using molasses wastewater as partial acidifying agent, a new Fenton-like catalyst (ACRM _sm ) was prepared through a simple process of acidification and calcination using red mud as main material. With molasses wastewater, both the free alkali and the chemically bonded alkali in red mud were effectively removed under the action of H₂SO₄ and molasses wastewater, and the prepared ACRM _sm was a near-neutral catalyst. The ACRM _sm preparation conditions were as follows: for 3 g of red mud, 9 mL of 0.7 mol/L H₂SO₄ plus 2 g of molasses wastewater as the acidifying agent, calcination temperature 573 K, and calcination time 1 h. Iron phase of ACRM _sm was mainly α-Fe₂O₃ and trace amount of carbon existed in ACRM _sm . The addition of molasses wastewater not only effectively reduced the consumption of H₂SO₄ in acidification of red mud but also resulted in the generation of carbon and significantly improved the distribution of macropore in prepared ACRM _sm . It was found that near-neutral pH of catalyst, generated carbon, and wide distribution of macropore were the main reasons for the high catalytic activity of ACRM _sm . The generated carbon and wide distribution of macropore were entirely due to the molasses wastewater added. In degradation of orange II, ACRM _sm retained most of its catalytic stability and activity after five recycling times, indicating ACRM _sm had an excellent long-term stability in the Fenton-like process. Furthermore, the performance test of settling showed ACRM _sm had an excellent settleability. ACRM_sm was a safe and green catalytic material used in Fenton-like oxidation for wastewater treatment.

     

三种环境动力学模型建模方式的比较

在农药和化学品的风险评估工作中,环境动力学模型正得到越来越多的应用。采用Stella软件、Matlab M文件和Matlab Simulink 组件3种建模方式分别构建了微宇宙、湖泊和海湾系统的多介质环境动力学模型,并对3种方式的建模难度、计算耗时及模型直观性进行了比较。研究结果表明：Stella模型最直观,但提供的计算方法有限,更适用于微分方程数量不多且计算周期短的模型;M文件模型建模速度最快,但在直观性和计算速度上没有优势,不建议在环境动力学模型中使用;Simulink模型兼具直观性和计算速度快的优点,无论微分方程数量多少,在需要进行长周期计算的模型中都最具优势。     

New insights for the risk of bisphenol A: Inhibition of UDP-glucuronosyltransferases (UGTs)

Bisphenol A (BPA), the important endocrine-disrupting chemical (EDC), has been reported to be able to induce various toxicity. The present study aims to understand the toxicity behavior of bisphenol A through evaluating the inhibition profile of bisphenol A towards UDP-glucuronosyltransferase (UGT) isoforms. In vitro recombinant UGTs-catalyzed 4-methylumbelliferone (4-MU) glucuronidation reaction was employed as probe reaction for all the tested UGT isoforms. The results showed that bisphenol A exerted stronger inhibition towards UGT2B isoforms than UGT1A isoforms. Furthermore, the inhibition kinetic type and parameters (K_i) were determined for the inhibition of bisphenol A towards UGT2B4, 2B7, 2B15, and 2B17. Bisphenol A exhibited the competitive inhibition towards UGT2B4, and noncompetitive inhibition towards UGT2B7, 2B15 and 2B17. The inhibition kinetic parameters (K_i) were calculated to be 1.1, 32.6, 5.6, and 19.9 μM for UGT2B4, 2B7, 2B15 and 2B17, respectively. In combination with the in vivo concentration of bisphenol A, the elevation of exposure dose was predicted to increase by 29.1%, 1%, 5.7%, and 1.6% for UGT2B4, 2B7, 2B15, and 2B17, indicating the high influence of bisphenol A towards the in vivo UGT2B isofroms-mediated metabolism of xenobiotics and endogenous substances. All these data provide the supporting information for deeper understanding of toxicology of bisphenol A.     

Chemical and morphological characterization of aerosol particles at Mt. Krvavec, Slovenia, during the Eyjafjallajökull Icelandic volcanic eruption

Objective

In this work, continuous and size-segregated aerosol measurements at Mt. Krvavec, Slovenia, during the Eyjafjallajökull volcanic eruption were performed. Based on chemical and morphological characteristics of size-segregated particles, the presence of the volcanic aerosols after long-range transport to Slovenia was to be confirmed.

Results and conclusions

Continuous measurements with the aethalometer and SMPS indicated the suspected volcanic ash plume passing over the sampling site. The aerosols collected by discrete sampling showed a chemical signature similar to the known elemental signature of the Icelandic volcanic ash. Coarse particles showed a composition typical for silicates rich in metals; in many cases also S was present. Morphological analysis showed particles with features indicative of an explosive volcanic eruption, e.g., pumice and pumice shards, glass shards, minerals, evidence of steam condensation, etc. The high sulfate concentration associated with the fine particles resulted in sulfate crystallization within the cascade impactor leading to the formation of large structures resembling a “fern”. Mass size distributions for Fe, Ti, Mn, Ca, Na, and Mg showed one primary peak (for Fe, Mn, and Ti at 2.8 μm; for Ca, Na, and Mg at ca. 4 μm), which supports the fact that most of the particles in the coarse sizes were silicates rich in metals. The size distribution of the water-soluble SO ₄ ^2? showed a maximum peak at 0.75 μm, which also confirms the high sulfate concentration in the fine particles. Chemical and morphological characterization of aerosols collected at Mt. Krvavec indeed confirmed that volcanic ash plume passed over Slovenia.     

磁性活性炭的制备及其对水中甲基橙的吸附

活性炭被广泛应用于水处理领域,然而吸附饱和后难以分离和再生的缺点却限制了其应用。本研究采用化学共沉淀法将铁氧化物和活性炭进行复合,制备出同时具有磁分离性能和较强的吸附性能的磁性活性炭复合材料,并对制备的复合材料进行表征,考察其对水中甲基橙的吸附性能。结果表明,制备的磁性活性炭的比表面积为666.72 m2/g,平均孔径为3.16 nm,具有良好的磁性能,在外加磁场下能快速地从溶液中分离出来且磁性能相对稳定,铁氧化物对活性炭吸附性能的影响不大。在温度为25℃、p H为5、吸附剂用量为3 g/L的情况下,吸附3 h后,该磁性活性炭对甲基橙的吸附率可达99.1%,预示着该磁性活性炭在水处理方面具有潜在的应用前景。     

石油炼制行业新旧污染物排放标准的差异

分别介绍了旧标准GB 8978—1996《污水综合排放标准》、GB 16297—1996《大气污染物综合排放标准》和新标准GB 31570—2015《石油炼制工业污染物排放标准》的核心内容。从适用范围、排放限值和污染控制因子3个方面分析了石油炼制行业新旧污染物排放标准的差异。     

旋转填充床中Fenton+O_3氧化降解模拟阿莫西林废水

以旋转填充床(RPB)作为反应装置,研究了Fenton工艺与Fenton+O3工艺处理模拟阿莫西林废水的效果,考察了FeSO4·7H2O的投加量、温度、旋转床转速、液体流量及pH对COD去除率的影响。实验表明,Fenton+O3工艺的COD脱除率及BOD5/COD相对于Fenton工艺分别提升26.7%和140%。该工艺在pH为3、温度为25℃、液体流量30 L/h、气体流量2.5 L/h、转速800 r/min、H2O2的投加量为1 mmol/L及Fe2+投加量为0.4 mmol/L的条件下,100 mg/L的模拟阿莫西林废水中COD的去除率达到57.9%,BOD5/COD从0增加到0.36,满足后续生化处理要求。     

Particle-bound Dechlorane Plus and polybrominated diphenyl ethers in ambient air around Shanghai, China

In present study, atmospheric particles from Shanghai, the biggest city and the most important industrial base in China, were analyzed for polybrominated diphenyl ethers (PBDEs) and Dechlorane Plus (DP). Concentrations of ∑(20)PBDEs and DP both exhibited the changing trend of industrial area > urban areas. Jiading District had the highest levels of particulate PBDEs and DP with values of 744 ± 152 pg/m(3) and 5.48 ± 1.28 pg/m(3), respectively. Compared with similar data in other areas of the world, PBDEs in Shanghai were at medium pollution level, while DP was at lower level, which reflected their different production and use in Shanghai. The results from multiple linear regression analysis suggested that deca-BDE mixture was the most important contributor of particulate PBDEs in Shanghai. The fractions of anti-DP showed no significant differences to those of the technical mixtures (p > 0.05), which suggested that no obviously stereoselective process occurred in ambient air around Shanghai.     

Equilibrium and kinetics of adsorption of phosphate onto iron-doped activated carbon

Purpose

Two series of activated carbons modified by Fe (II) and Fe (III) (denoted as AC/N-Fe^II and AC/N-Fe^III), respectively, were used as adsorbents for the removal of phosphate in aqueous solutions.

Method

The synthesized adsorbent materials were investigated by different experimental analysis means. The adsorption of phosphate on activated carbons has been studied in kinetic and equilibrium conditions taking into account the adsorbate concentration, temperature, and solution pH as major influential factors.

Results

Maximum removals of phosphate are obtained in the pH range of 3.78?C6.84 for both adsorbents. Langmuir isotherm adsorption equation well describes the experimental adsorption isotherms. Kinetic studies revealed that the adsorption process followed a pseudo-second order kinetic model. Results suggest that the main phase formed in AC/N-Fe^II and AC/N-Fe^III is goethite and akaganeite, respectively; the presence of iron oxides significantly affected the surface area and the pore structure of the activated carbon.

Conclusions

Studies revealed that iron-doped activated carbons were effective in removing phosphate. AC/N-Fe^II has a higher phosphate removal capacity than AC/N-Fe^III, which could be attributed to its better intra-particle diffusion and higher binding energy. The activation energy for adsorption was calculated to be 22.23 and 10.89 kJ mol^?1 for AC/N-Fe^II and AC/N-Fe^III, respectively. The adsorption process was complex; both surface adsorption and intra-particle diffusion were simultaneously occurring during the process and contribute to the adsorption mechanism.     

Disposal and resource utilization of waste masks: a review

Environmental Science and Pollution Research - Waste masks pose a serious threat to the environment, including marine plastic pollution and soil pollution risks caused by landfills since the...