Design of on-line river water quality monitoring systems using the entropy theory: a case study

The design of a water quality monitoring network is considered as the main component of water quality management including selection of the water quality variables, location of sampling stations and determination of sampling frequencies. In this study, an entropy-based approach is presented for design of an on-line water quality monitoring network for the Karoon River, which is the largest and the most important river in Iran. In the proposed algorithm of design, the number and location of sampling sites and sampling frequencies are determined by minimizing the redundant information, which is quantified using the entropy theory. A water quality simulation model is also used to generate the time series of the concentration of water quality variables at some potential sites along the river. As several water quality variables are usually considered in the design of water quality monitoring networks, the pair-wise comparison is used to combine the spatial and temporal frequencies calculated for each water quality variable. After selecting the sampling frequencies, different components of a comprehensive monitoring system such as data acquisition, transmission and processing are designed for the study area, and technical characteristics of the on-line and off-line monitoring equipment are presented. Finally, the assessment for the human resources needs, as well as training and quality assurance programs are presented considering the existing resources in the study area. The results show that the proposed approach can be effectively used for the optimal design of the river monitoring systems.     

Simultaneous derivatization and extraction of nitrophenols in soil and rain samples using modified hollow-fiber liquid-phase microextraction followed by gas chromatography–mass spectrometry

A simple and sensitive method based on a modified hollow-fiber liquid-phase microextraction followed by gas chromatography–mass spectrometry has been successfully developed for the extraction and simultaneous derivatization of some nitrophenols (NPs) in soil and rain samples. Microwave-assisted solvent extraction was used for the extraction of NPs from the soil, while the rain sample was directly applied to the previously mentioned method. Briefly, in this method, the analytes were extracted from aqueous samples into a thin layer of organic solvent (dodecane?+?10 % tri-n-octylphosphine oxide) sustained in the pores of a porous hollow fiber. Then, they were back-extracted using a small volume of organic acceptor solution (25 μl; 10 mg/L N-methyl-N-(trimethylsilyl)trifluoroacetamide, as derivatization reagent, in acetonitrile) that was located inside the lumen of the hollow fiber. Under the optimized extraction conditions, enrichment factors of 255 to 280 and limits of detection of 0.1 to 0.2 μg/L (S/N?=?3) with dynamic linear ranges of 1–100 μg/L were obtained for the analytes. The accuracy of the approach was tested by the relative recovery experiments on spiked samples, with results ranging from 93 to 113 %. The method was shown to be rapid, cost-effective, and potentially interesting for screening purposes.     

2-Nitroso-1-naphthol as a selective reagent for preconcentration of cobalt by vortex assisted combined with solidification of organic droplet and its determination by flame atomic absorption spectrometry

Highly rapid and selective vortex-assisted liquid–liquid microextraction based on solidification of organic drop has been used for determination of cobalt ion. 2-Nitroso-1-naphthol (2N1N) was used as a selective complexing agent to form stable cobalt–2N1N complex which can be extracted with 1-undecanol at a short time by the assistance of vortex agitator system followed by its determination using flame atomic absorption spectrometry. In vortex assisted, vigorous vortex stream as well as the vibrant effect of vortex system cause very fine droplets of extraction solvent to be produced and extraction occurred at a short time. Some parameters influencing the extraction process such as pH of samples, concentration of 2-nitroso-1-naphthol, extraction solvent volume, extraction time, ionic strength and surfactant addition, as well as interferences were evaluated in detail and optimum conditions were selected. At the optimum conditions, the calibration curve was linear in the range of 15 to 400 μg L^?1 of cobalt ions. The relative standard deviation based on ten replicate analysis of sample solution containing 50 μg L^?1 of cobalt was 3.4 %. The detection limit (calculated as the concentration equivalent to three times of the standard deviation of the blank divided by the slope of the calibration curve after preconcentration) was 5.4 μg L^?1. The accuracy of the proposed method was successfully evaluated by the analysis of certified reference materials. This selective and highly rapid method was used for determination of cobalt ions in different water samples.     

A simple extraction procedure for determination of total mercury in crude oil

The determination of mercury in crude oil and petroleum products is particularly difficult due to the volatile nature of both mercury and the matrix, which may lead to significant loss of the analyte. A simple extraction method for total mercury has been developed to determine total mercury in crude oil using cold vapor atomic fluorescence spectrometry. The homogenized crude oil sample was diluted to 5, 10, and 20 % (w/w) in toluene. The diluted crude oil samples were spiked with 10 and 40 μg/kg (w/w). The samples were extracted using an oxidant/acid solution, BrCl/HCl. The mercury was extracted into the aqueous phase; the ionic mercury was then reduced to volatile elemental mercury (Hg⁰) by stannous chloride (SnCl₂). The mercury vapor was detected by Merlin cold vapor atomic fluorescence spectrometry at a 253.7-nm wavelength. The average recoveries for mercury in spiked diluted crude oil (10 and 40 μg/kg, w/w) were between 96 and 103 %, respectively, in 5 and 10 % spiked diluted crude oil. Whereas, low recoveries (<50 %) were recorded in 20 % diluted spiked crude oil. The method detection limit was calculated as t _{(0.01)(n ? 1)}?×?SD where t is the student's value for 99 % confidence level and standard deviation estimate with n???1 degrees of freedom. The method detection limit was found to be 0.38 μg/kg based on 5 g of diluted crude oil sample. The method is sensitive enough to determine low levels of mercury in crude oil.     

Assessment of metal status in drainage canal water and their bioaccumulation in Oreochromis niloticus fish in relation to human health

The purpose of this study was to assess metal concentrations (Al, Cd, Pb, Hg and Ni) in Sabal drainage canal (Al-Menoufiya Province, River Nile Delta, Egypt) water as well as their accumulation in some selected organs (skin, muscles and kidneys) of Oreochromis niloticus fish to evaluate their hazard levels in relation to the maximum residual limits for human consumption. Drainage canal water was found to be heavily polluted with metals which far exceeded the permissible limits. It was found that metals accumulated in organs of O. niloticus in concentrations higher than those of canal water. Kidneys of O. niloticus contained the highest concentrations of the detected metals, while skin appeared to be the least preferred site for the bioaccumulation of metals as the lowest metals concentrations were detected in this tissue. The present study shows that fish organs contained high levels of metals exceeding the permissible limits values. Metals in muscle of fish were higher than the maximum permissible concentrations for human consumption. Thus, consuming fish caught from drainage canals is harmful to the consumers.     

Health risk assessment of heavy metal intake due to fish consumption in the Sistan region,Iran

The heavy metal (Pb, Cd, Cr, and Ni) content of a fish species consumed by the Sistan population and its associated health risk factors were investigated. The mean concentrations of Pb, Cd, and Cr were slightly higher than the standard levels. The Ni content of fish was below the maximum guideline proposed by the US Food and Drug Administration (USFDA). The average estimated weekly intake was significantly below the provisional tolerable intake based on the FAO and WHO standards for all studied metals. The target hazard quotients (THQ) of all metals were below 1, showing an absence of health hazard for the population of Sistan. The combined target hazard quotient for the considered metals was 26.94 × 10^?3. The cancer risk factor for Pb (1.57 × 10^?7) was below the acceptable lifetime carcinogenic risk (10^?5). The results of this study reveal an almost safe level of Pb, Cd, Cr, and Ni contents in the fish consumed by the Sistan population.

Open image in new window

Graphical abstract ?

     

Discharge permit market and farm management nexus: an approach for eutrophication control in small basins with low-income farmers

The economic concerns of low-income farmers are barriers to nutrient abatement policies for eutrophication control in surface waters. This study brings up a perspective that focuses on integrating multiple-pollutant discharge permit markets with farm management practices. This aims to identify a more economically motivated waste load allocation (WLA) for non-point sources (NPS). For this purpose, we chose the small basin of Zrebar Lake in western Iran and used the soil and water assessment tool (SWAT) for modeling. The export coefficients (ECs), effectiveness of best management practices (BMPs), and crop yields were calculated by using this software. These variables show that low-income farmers can hardly afford to invest in BMPs in a typical WLA. Conversely, a discharge permit market presents a more cost-effective solution. This method saves 64% in total abatement costs and motivates farmers by offering economic benefits. A market analysis revealed that nitrogen permits mostly cover the trades with the optimal price ranging from $6 to $30 per kilogram. However, phosphorous permits are limited for trading, and their price exceeds $60 per kilogram. This approach also emphasizes the establishment of a regional institution for market monitoring, dynamic pricing, fair fund reallocation, giving information to participants, and ensuring their income. By these sets of strategies, a WLA on the brink of failure can turn into a cost-effective and sustainable policy for eutrophication control in small basins.     

SPME-based air sampling method for inhalation exposure assessment studies: case study on perchlorethylene exposure in dry cleaning

Exposure to perchlorethylene, especially for dry cleaning workers and for people living near dry cleaning shops, could lead to several diseases and disorders. This study examines the value of solid-phase microextraction (SPME) for sampling perchlorethylene in the atmosphere of dry cleaning shops. Carboxen/polydimethylsiloxane (CAR/PDMS) in 0.5-cm retracted mode was selected. There were no significant differences between sampling rates at different temperatures (range of 20 to 30 °C) and air velocities (2 to 50 cm/s). On the opposite, relative humidity (RH) had a significant effect on sampling rates. Method reproducibility was realized in the laboratory and field conditions and was 6.2 % and 7 to 11 %, respectively. Repeatability was also determined as 8.9 %. Comparison of the results according to the American Industrial Hygiene Association exposure assessment strategy showed the SPME sampler yields more conservative results in comparison with traditional standard method.     

Technical efficiency and agricultural sustainability–technology gap of maize producers in Fars province of Iran

Fars has a special place in Iran in terms of natural resources and diverse climate aiming this province to increase production of major crops such as corns. In light of increasing domestic production and preventing yield loss of maize, many farmers utilize high quantities of pesticides, chemical fertilizers and over-extract groundwater without considering immediate and long-term consequences of such operations on environment. The main purpose of this study is to investigate technical efficiency and sustainability–technology gap ratio (STGR) of maize producers by agricultural sustainability in Fars province in Iran. Technical efficiency is considered as a key element among the triple elements of sustainable development (economic, social and ecological). Applying model of agricultural sustainability and compromise programming method, regions were classified into three groups (sustainable, relatively sustainable and unsustainable), and data were collected interviewing a total of 300 farmers in 2008–2009 from Kazerun, Firouzabad and Marvdasht chosen randomly and systematically as representatives of these three groups. Technical efficiencies and STGRs were calculated for the regions applying stochastic production frontier, regional stochastic frontier functions and the metafrontier. The results indicate that assuming the same technology between the fields (traditional methods) leads to overestimation of technical efficiency. Mean STGRs in Marvdasht, Firouzabad and Kazerun were found to be 59.3, 71.1 and 68.9, respectively. This suggests that technical efficiency and STGR of relatively sustainable regions are higher than those of the unsustainable regions. Thus, farmers in these areas can reduce gap between technology and agricultural sustainability levels via achieving metatechnology that is compatible with sustainable agriculture.     

Farming adaptation to environmental change in coastal Bangladesh: shrimp culture versus crop diversification

Farming in coastal Bangladesh includes rice/shrimp and rice/non-rice cropping systems. The former has been highly profitable but has exacerbated salinization of soil and water. We evaluate the relative profitability, riskiness, and sustainability of the two cropping systems, using data from two coastal villages in Khulna District. Shrimp cultivation was initially very rewarding. However, over 12–15 years, the cropping system experienced declining profitability, increased salinity, and adverse impacts on rice cropping and the local environment. From 2009, farmers adapted the system by changing the pond (gher) infrastructure, adopting delayed planting of a saline-tolerant rice cultivar, flushing out accumulated salt with freshwater during rice cropping, and allowing the soil to dry out after harvesting rice. The budgeting results show that with current management practices, the rice/shrimp system is economically more viable (higher returns to land and labour and less risky) than the rice/non-rice system. Soil analyses showed that while salinity was higher in the gher during the dry season, it was significantly reduced in the wet season and was very similar between the two systems (1–2 dS/m). Hence, as well as being more profitable and less risky, the rice/shrimp system may well be more sustainable than previously observed.