Elucidation of phosphorous sorption by calcareous soils using principal component analysis

This study was conducted to understand the mechanisms governing P-sorption and desorption by calcareous soils (up to 48% CaCO ₃). Batch experiments with KCl as background were carried out by adding varying amount of P up to 100 mgP.L^?1. The desorption percentage (%DES) results show that little P was released from the adsorbed phase. Principal component analysis was applied to evaluate the combined influence of soil components on P sorption. The complex P sorption process can be related to specific soil components by the following equation: P? sorption=?2.20 (CaCO ₃% )?0.04 (Fe? oxide)+0.04 (pHe)+11.02 (sand % )+3.35 (silt)?10.73 (clay)?1.24 (EC)?0.22 (OM)?0.81 (CEC)?1.93 (P? Olsen) (R²=0.9941, SSE=380). Sand% and clay% are the most significant variables for modelling P sorption data. The derived equation could be applied to predict P sorption in other soils that have similar compositions to those investigated herein. The degree of P saturation (DPS) threshold level for all soils was less than 3% except in the soil with the lowest iron oxide. All of the studied soils have exceeded the environmentally unacceptable P concentration except the soil with the lowest iron oxide content.     

Chlorpyrifos insecticide uptake by plantain from polluted water and soil

Chlorpyrifos is a common organophosphorus insecticide used for crop protection. Chlorpyrifos use has induced heath issues and water pollution. Such issues may be solved by phytoremediation, which is the use of plants for the cleanup of pollutants. Here, we tested Plantago major L. to clean water and soils under laboratory conditions. Results show that the concentration of chlorpyrifos residues after 5 days exposure reached 36.86 μg/g in roots and 13.93 μg/g in upper plant tissues. Gas chromatography–mass spectrometry (GC–MS) analysis of chlorpyrifos metabolites suggests the formation of 3, 5, 6-trichloro-2-pyridinol (TCP) and diethyl 3,5,6-trichloropyridin-2-yl phosphate (chlorpyrifos-oxon). Chlorpyrifos-oxon was detected in the roots and the leaves after 2 h of testing. After 24 h of testing, the degradation product chlorpyrifos-oxon increased in the roots and the leaves then decreased gradually until the end of testing. TCP levels increased gradually to 192 h then decreased until the end of testing.     

Environmental assessment of Kuwait Bay: an integrated approach

Kuwait Bay is an imperative characteristic of the State of Kuwait. It has a number of major activities existing around it, including, business, industrial and recreational ones. The phase of construction and development of projects, and their resulting pollution have led to major change in the features of the area. The purpose of this research is to serve as a managing tool for decision-making through the environmental assessment of Kuwait Bay. Due to the multiplicities and diversities of the man-made activities and the natural environmental setting of the bay, the impacts are out looked on a holistic approach rather than on a single approach. The methodology of assessment including, sampling and analysis of water and sediment, statistical analysis, as well as application of the Rapid Impact Assessment Matrix (RAIM) in order to analysis the impacts in an integrated approach. The southern areas of the bay are the main sources of pollution that distributed northward to cover the central region of the bay. Sulaibikhat Bay (South-West sector of the bay) is the most vulnerable area due to its exposure to anthropogenic activities such as reclamations, sewage inflow and other activities. The area near Shuwaikh Port is suffering due to reclamation processes. The northern and north-west sectors suffer from coastal erosion as well as from pollutants arriving via Shatt Al Arab.     

Abundant ketone isolated from oily Plakortis sponge demonstrates antifouling properties

Marine sponges of the Genus Plakortis are typically unfouled; they can have a distinctive pleasant smell and an oily surface. A significant quantity of fragrant oil was obtained from a Jamaican Plakortis sp. by cryo-trap. The oil was determined to be exclusively 2-decanone. The antifouling character of the oil was evaluated by its effects on surface attachment of a gram negative bacterial model using confocal fluorescence microscopy as well as its effects on the attachment of Dreissena polymorpha (zebra mussel). The ketone dramatically inhibited attachment of the bacteria and zebra mussels. The results suggest that the oil impacts establishment of related epifauna on the Plakortis sponge in nature. Although the aliphatic ketone alone is not a potential commercial alternative for antifouling coatings, incorporating the functionality into coating design should be considered in future studies.     

Feasibility of the hydrogen sulfide test for the assessment of drinking water quality in post-earthquake Haiti

In 2010, a magnitude 7.0 earthquake struck Haiti, severely damaging the drinking and wastewater infrastructure and leaving millions homeless. Compounding this problem, the introduction of Vibrio cholerae resulted in a massive cholera outbreak that infected over 700,000 people and threatened the safety of Haiti’s drinking water. To mitigate this public health crisis, non-government organizations installed thousands of wells to provide communities with safe drinking water. However, despite increased access, Haiti currently lacks the monitoring capacity to assure the microbial safety of any of its water resources. For these reasons, this study was designed to assess the feasibility of using a simple, low-cost method to detect indicators of fecal contamination of drinking water that could be implemented at the community level. Water samples from 358 sources of drinking water in the Léogâne flood basin were screened with a commercially available hydrogen sulfide test and a standard membrane method for the enumeration of thermotolerant coliforms. When compared with the gold standard method, the hydrogen sulfide test had a sensitivity of 65 % and a specificity of 93 %. While the sensitivity of the assay increased at higher fecal coliform concentrations, it never exceeded 88 %, even with fecal coliform concentrations greater than 100 colony-forming units per 100 ml. While its simplicity makes the hydrogen sulfide test attractive for assessing water quality in low-resource settings, the low sensitivity raises concerns about its use as the sole indicator of the presence or absence of fecal coliforms in individual or community water sources.     

Interspecific and locational differences in metal levels in edible fish tissue from Saudi Arabia

Metal levels in fish have been extensively studied, but little data currently exists for the Middle East. We examined the levels of metals and metalloids (aluminum, arsenic, copper, manganese, selenium, zinc, and mercury) in the flesh of 13 fish species collected from three fishing sites and a local fish market in Jeddah, Saudi Arabia. We tested the following null hypotheses: (1) there are no interspecific differences in metal levels, (2) there are no differences in metal levels in fishes between market and fishing sites, (3) there are no size-related differences in metal levels, and (4) there are no differences in selenium:mercury molar ratio among different fish species. There were significant interspecific differences in concentrations for all metals. There was an order of magnitude difference in the levels of aluminum, arsenic, mercury, manganese, and selenium, indicating wide variation in potential effects on the fish themselves and on their predators. Fishes from Area II, close to a large commercial port, had the highest levels of arsenic, mercury, and selenium, followed by market fishes. Mercury was positively correlated with body size in 6 of the 13 fish species examined. Mercury was correlated positively with arsenic and selenium, but negatively with aluminum, cobalt, copper, manganese, and zinc. Selenium:mercury molar ratios varied significantly among species, with Carangoides bajad, Cephalopholis argus, Variola louti, and Ephinephelus tauvina having ratios below 10:1. These findings can be used in risk assessments, design of mercury reduction plans, development of fish advisories to protect public health, and future management decision-making.     

The first detection of potentially toxic <Emphasis Type="Italic">Microcystis</Emphasis> strains in two Middle Atlas Mountains natural lakes (Morocco)

Aguelmam Azizgza (LAZ) and Dayet Afourgah (DAF) are two Moroccan natural lakes located in a humid hydrographic basin of the Middle Atlas Mountains. Both are considered important reservoirs of plant and animal biodiversity. In addition, they are extensively used for recreational and fishing activities and as a water source for irrigation of agricultural crops. Recurrent cyanobacteria scum episodes in the two water bodies have been reported, Microcystis being the main genus in the scums. Here, we report on the toxic potential of three Microcystis aeruginosa strains isolated from those lakes: Mic LAZ and Mic B7 from LAZ and Mic DAF isolated from DAF. The toxic potential was checked by their microcystin (MC) content and the presence of mcy genes involved in MC synthesis. The identification and quantification of MC variants were performed by high-performance liquid chromatography-photo-diode array. The detection of mcy genes was achieved by whole-cell multiplex PCR that allowed the simultaneous amplification of DNA sequences corresponding to specific mcy regions. MC content of cultured cells, as MC-LR equivalents per gram cell biomass, was slightly higher in Mic LAZ (ca. 860) than in Mic B7 (ca. 700) and Mic DAF (ca. 690). Four MC variants were identified in the three isolates: MC-WR, MC-RR, MC-DM-WR, and MC-YR. The presence of toxic Microcystis strains in the two studied lakes may be regarded as an environmental and health hazard, especially during periods of bloom proliferation. It would be recommended the use of two complementary techniques, as those utilized herein (HPLC and mcy detection) to alert on highly probable toxicity of such lakes.     

The application of iron mesh double layer as anode for the electrochemical treatment of Reactive Black 5 dye

In this work a novel anode configuration consisting of an iron mesh double layer is proposed for the electrochemical treatment of wastewater. The removal of Reactive Black 5 dye(RB5) from synthetic contaminated water was used as a model system. At a constant anode surface area, identical process operating parameters and batch process mode, the iron mesh double layer electrode showed better performance compared to the conventional single layer iron mesh. The double layer electrode was characterized by RB5 and chemical oxygen demand(COD) removal efficiency of 98.2% and 97.7%, respectively, kinetic rate constant of 0.0385/min, diffusion coefficient of 4.9 × 10~(-5)cm~2/sec and electrical energy consumption of 20.53 kWh/kgdye removed. In the continuous flow system, the optimum conditions suggested by Response Surface Methodology(RSM) are: initial solution p H of 6.29,current density of 1.6 m A/cm~2, electrolyte dose of 0.15 g/L and flow rate of 11.47 m L/min which resulted in an RB5 removal efficiency of 81.62%.     

Recycled tire granular for playground in hot regions: technical assessment

Journal of Material Cycles and Waste Management - Scrap tire granulation used for crumb rubber tiles and poured-in-place rubber surfaces are waste management strategy for the overgrowing tire...