Comparison of drinking water mutagenicity with leaching of polycyclic aromatic hydrocarbons from water distribution pipes

The primary objectives of this study were to examine the changes in concentration of six polycyclic aromatic hydrocarbons (PAH) and the possibility of changes in mutagenic potential of treated waters as a result of their passage through commonly used distribution pipes. With the exception of the finished water taken at one treatment plant in which the total concentration of the six PAH was 138.5 parts per trillion (ppt), the total initial concentration in all other treated water ranged from 0 to 13.4 ppt. The corresponding total PAH concentration in water after passage through the distribution pipes varied from 0 to 61.6 ppt. This demonstrated that PAH concentration in water can increase as a result of their passage through coated distribution pipes. Mutagenic activity was also detected in many of the treated water samples, however, the levels of this activity did not correlate with either the transit of water through the distribution system or the levels of PAH in the water. There was some evidence to indicate that the water treatment process itself may have contributed to the mutagenicity observed in the finished water.     

Concentration and composition of atmospheric aerosols from the 1995 SEAVS experiment and a review of the closure between chemical and gravimetric measurements

We summarize the results from the various measurements and the inter-sampler comparisons from Southeastern Aerosol and Visibility Study (SEAVS), a study with one of its objectives to test for closure among chemical, gravimetric and optical measurements of atmospheric aerosol particles. Sulfate and organics are the dominant components of the SEAVS fine particles (nominally, particles with aerodynamic diameter < or = 2.5 microns) but between 28 and 42% (range over various samplers) of the gravimetrically measured total fine particle concentration is unidentified by the chemical measurements. Estimates of water associated with inorganic components and measurement imprecision do not totally explain the observed difference between gravimetric and chemical measurements. We examine the theoretical and empirical basis for assumptions commonly made in the published literature to extrapolate total fine particle concentration on the basis of chemical measurements of ions, carbon and elements. We then explore the more general question of closure using the SEAVS data as well as data from other, similar studies reported in the literature. In so combining the SEAVS measurements with other similar studies, we find a strong association between organic carbon and the unidentified component, that is, the fraction of the total fine particle concentration not identified by chemical measurements. We offer several tenable hypotheses for the relationship between the organic and unidentified components that deserve to be tested in future work. Specifically, we hypothesize that (1) errors in the sampling and analysis of organic carbon; (2) estimates of organic mass from measurements of organic carbon; and/or (3) water absorption by organics may all contribute to the observed relationship.     

Daily surface UV exposure and its relationship to surface pollutant measurements

For the past 30 years, the stratospheric ozone layer has decreased in the Northern Hemisphere. The main effect of this ozone decrease was an expected increase in the UV radiation at the Earth's surface, but there has been no clear evidence of an increasing urban trend in surface UV. This study shows that specific air pollutants can reduce the increased surface levels of UV radiation and offers an explanation for why the expected surface UV increases have not been observed, especially in urban regions. A U.S. Environmental Protection Agency (EPA) UV monitoring site at the University of California at Riverside combined with air pollution data from a site operated by the California Air Resources Board in Rubidoux, CA, provided the basis of this study. The 1997 South Coast Ozone Study (SCOS-97) provided three key ingredients: black carbon, PM10 concentrations, and collocated radiometric measurements. The Total Ozone Mapping Spectrometer (TOMS) satellite data were used to provide the stratospheric ozone levels that were included in the statistical model. All of these input parameters would be used to test this study's hypothesis: the expected increase of surface UV radiation, caused by decreases in stratospheric ozone, can be masked by increases in anthropogenic emissions. The values for the pollutants were 7:00 a.m.-5:00 p.m. averages of the instrument's values taken during summer 1997. A statistical linear regression model was employed using the stratospheric ozone, black carbon, PM10, and surface ozone concentrations, and the sin (theta) and cos (theta). The angle theta is defined by theta = 2pi (Julian date/365). This model obtained a coefficient of determination of 0.94 with an uncertainty level (p value) of less than 0.3% for all of the variables in the model except ground-level ozone. The final model, regressed against a data set from a remote, western North Carolina site, resulted in a coefficient of determination of 0.92. The model shows that black carbon can reduce the Diffey-weighted UV levels that reach the surface by as much as 35%, depending on the season.     

Effect of vegetable oil factory effluent on the gonads of a freshwater teleost, Heteropneustes fossilis (Bl.) --a biochemical study

The effects of three sublethal concentrations (5,10,15% v/v) of vegetable oil factory effluent on biochemical changes in the gonads (ovaries/testes) of a freshwater teleost were studied. The results reveal a significant decline in the total lipid, cholesterol, phospholipid, and glycerine levels, but an increase in the free fatty acid levels, both in the ovaries and the testes of H. fossilis, following 150 days (mid-January through mid-June) of exposure to 10% and 15% concentrations of the effluent. This decrease/increase in the biochemical parameters was more or less dependent on the concentration of the effluent. The functional significance of any decrease/increase in the biochemical parameter(s) has been discussed.     

Characteristics variation of coal combustion residues in an Indian ash pond.

Coal-fired power plants all over the world are cited as one of the major sources that generate huge quantities of coal combustion residues (CCRs) as solid wastes. Most frequently CCRs are collected through electrostatic precipitators, mixed with bottom ash by hydraulic systems and deposited in ash ponds. The quality of the CCRs at different locations in one of the ash ponds in Central India was evaluated to understand the variation in characteristics with a view to effective utilization. Results revealed that the presence of fine particles (< 50 mocrom) increased with increasing distance from the ash slurry inlet zone in the ash pond. Wide variations in the bulk density (800-980 kg m(-3)), porosity (45-57%) and water-holding capacity (57.5-75.7%) of CCRs were recorded. With increasing distance the pH of the CCRs decreased (from 9.0 to 8.2) and electrical conductivity increased (from 0.25 to 0.65 dS m(-3)). The presence of almost all the heavy metals in CCRs exhibited an increase with distance from the ash slurry discharge zone due to the increase in surface area (from 0.1038 to 2.3076 m2 g(-1)) of CCRs particles. The present paper describes the variation of characteristics of CCRs deposited in the ash pond and their potential applications.     

Effects of Wood Fiber and Microclay on the Performance of Soy Based Polyurethane Foams

Various polyurethane (PU) foams were prepared by in situ reaction of isocyanate and soy-based polyol. The effects of wood fiber and microclay on the foam morphologies, mechanical properties and thermal behaviors of PU foams were investigated. NCO index had fundamental impacts on the influences of wood fiber and microclay on the performance of PU foams. The reinforcement behavior of flexible foams was different to that of both semi-rigid and rigid foams. Both fiber and microclay improved the compressive strength at a high NCO index of 140–250, and contributed to relative high decomposition temperatures. Unlike the compressive strength, the tensile strength was decreased due to the amount of hard polyurea formation from secondary reactions at the highest NCO level. In addition, wood fiber had different reinforcement mechanism from microclay. Wood fiber desired to form chemical bonds during foaming while microclay had potential to form physical insertions. This difference was expressed by the change of their thermal degradation temperature.     

Receptor modeling for source apportionment of polycyclic aromatic hydrocarbons in urban atmosphere

This study reports source apportionment of polycyclic aromatic hydrocarbons (PAHs) in particulate depositions on vegetation foliages near highway in the urban environment of Lucknow city (India) using the principal components analysis/absolute principal components scores (PCA/APCS) receptor modeling approach. The multivariate method enables identification of major PAHs sources along with their quantitative contributions with respect to individual PAH. The PCA identified three major sources of PAHs viz. combustion, vehicular emissions, and diesel based activities. The PCA/APCS receptor modeling approach revealed that the combustion sources (natural gas, wood, coal/coke, biomass) contributed 19–97% of various PAHs, vehicular emissions 0–70%, diesel based sources 0–81% and other miscellaneous sources 0–20% of different PAHs. The contributions of major pyrolytic and petrogenic sources to the total PAHs were 56 and 42%, respectively. Further, the combustion related sources contribute major fraction of the carcinogenic PAHs in the study area. High correlation coefficient (R ² > 0.75 for most PAHs) between the measured and predicted concentrations of PAHs suggests for the applicability of the PCA/APCS receptor modeling approach for estimation of source contribution to the PAHs in particulates.     

Microwave assisted solvent-free synthesis and biological activities of novel imines (Schiff bases)

Twelve new ortho-Hydroxyketimines were synthesized by conventional as well as microwave method and evaluated for their antinemic activity against Meloidogyne incognita [(Kofoid and White) Chitwood]. Conventional methods for synthesis of Schiff bases require refluxing at 140°C of the reactants in different solvents for at least 24 h or more, where as the microwave-assisted synthesis has brought down the reaction time from 24 h to 1 minute. The procedure reported is simple as it does not require any organic solvents and the time has been reduced to only 1 minute. Comparative yields of all compounds by different methods revealed that the yield was low in conventional method (79–87%) as compared to microwave assisted synthesis (94–97%). The bioassay revealed that all the test compounds exhibited promising nematicidal activity; N-propyl-2-hydroxypropiophenonimine being the most effective with LC₅₀ value of 74.46 mgL^?1 followed by N-hexyl-2-hydroxyacetophenonimine with LC₅₀ value of 99.60 mgL^?1 after 72 h of exposure. The results obtained from bioassay indicated that this class of compounds has not only given a lead with regard to potential of Schiff bases in pest control, but has suggested that a carbon chain length of 6 atoms in the side chain is optimum on the basis of structure activity relationship (SAR).     

Semen quality of environmentally exposed human population: the toxicological consequence

Human data on the relationship of semen quality with pesticide and metals are mostly inconsistent. The purpose of the study is to confirm the toxicity of organochlorine pesticide β- and γ-hexachlorocyclohexane (HCH), DDE and DDD, and metals lead or cadmium on sperm motility in epidemiological study among fertile and infertile men and to determine whether in vivo and in vitro results are in the same direction. Semen analysis and estimation of the toxicants were done in 60 fertile and 150 infertile men. In the in vitro studies, sperm were exposed to the highest levels of these toxicants found in vivo, as well as five and ten times higher, and to the mixture of all compounds. The study assesses sperm viability and motility for a period ranging between 30 min and 96 h. Epidemiological data showed an inverse correlation of toxicant with sperm motility. In vitro study showed that γ-HCH and lead after 12 h, cadmium after 8 h, and coexposure to toxicants after 6 h of exposure caused significant concentration- and duration-dependent decline in sperm motility. Data of in vitro study were concurrent with epidemiological finding that might be useful in establishing the possible association between exposure and effect of these selected pollutants on sperm motility.     

Prediction of Flue Gas Composition of an Incinerator Based on a Nonequilibrium-Reaction Approach

A nonequilibrium-reaetion model is developed to predict the flue gas composition of an incinerator for solid waste combustion and gasification. The model may also be effectively utilized to predict the composition of exit gas from the primary chamber of an incinerator where invariably substoichiometrie combustion conditions exist The model assumes that the drying and pyrolysis of waste occurs in sequence followed by combustion of devolatilized gas and residue separately. The model is applied to the combustion of pine wood, and the flue gas compositions are computed as a function of operating parameters such as temperature (1100 to 1500 K), initial moisture content (0 to 40 percent), and percentage excess air (up to 100 percent). The model is extended to include substoichiometric combustion (to simulate the gasification process without steam injection) to compare its predictions with the available experimental data. The general agreement of theory and experiment is good.