New Biopolymer Nanocomposite of Starch-Graft Polystyrene/Montmorillonite Clay Prepared Through Emulsion Polymerization Method

Starch-g-polystyrene (Starch-g-PS)/Montmorillonite nanocomposites were prepared via free-radical graft copolymerization of styrene and starch in the presence of montmorillonite clay, by emulsion polymerization method using potassium persulfate (KPS) as an initiator/catalyst and sodium dodecylbenzensulfonate (SDBS) as an emulsifier. The nanocomposites with different clay content 0, 2.5, 5.0, 7.5 and 10 weight percent of starch were prepared and the changes in layer-stacked structures of the clay particles in the resulted nanocomposite compounds were examined by using of X-ray diffraction and FT-IR spectroscopy. Finally the thermal degradation behavior and morphology of nanocomposites were studied using thermal gravimetric analysis (TGA) and SEM, respectively.     

Ultra-sensitive quantification of copper in food and water samples by electrochemical adsorptive stripping voltammetry

A new electrochemical adsorptive stripping voltammetry method was developed for the determination of trace amounts of copper in food and water samples. The study of electrochemical behavior of Cu ion indicated that Cu(II) and Schiff base formed a complex in H₃BO₄–NaOH buffer solution (pH?=?7.25). An accumulation potential of ?100 mV (vs Ag/AgCl) was applied while the solution was stirred for 60 s. The response curve was recorded by scanning the potential, and the peak current of ?0.31 V (vs Ag/AgCl) was recorded. The peak current and concentration of copper accorded with linear relationship in the range of 0.04–120 ng mL^?1. The relative standard deviation (for 12 ng mL^?1 of copper) was 1.73 %, and the detection limit was 0.007 ng mL^?1. The possible interference of some common ions was studied. The proposed method was applied to the determination of copper in water, rice, wheat, tea, milk, and tomato with satisfactory results.     

Measurement and management of hospital waste in southern Iran: a case study

One of the requirements for development of human societies is the establishment of new healthcare centers. A variety of wastes are generated in healthcare centers depending on the type of activities. This study was conducted to identify, measure and manage different types of hospital wastes as a case study in a hospital located in southern Iran. For this purpose, a questionnaire was initially designed and distributed among the relevant experts to survey the current trend of waste management in the hospital in terms of waste collection, storage and disposal. Afterwards, the hospital waste was sampled during two seasons of fall and winter. The samples were weighted for seven consecutive days in the middle of each season. Approximately, 10 % of the total waste bags per day collected round the clock were selected for further analysis. The obtained results indicated that infectious-hazardous and pseudo-household wastes were, respectively, about 3.79 kg/day/bed, 1.36 kg/day/bed and 2.43 kg/day/bed of the total generated waste in the hospital. As the research findings suggest, proper separation of infectious and pseudo-household wastes at the source would be an essential step towards mitigating environmental and health risks and minimizing the cost of the hospital waste management.     

PAH removal using soil and sediment washing at a contaminated harbor site

In tests conducted for the Canadian government on sediment from Thunder Bay Harbour, Ontario, the BioGenesis washing process was demonstrated to be effective in remediating contaminated harbor sediments. Removal efficiencies for 16 polyaromatic hydrocarbons (PAHs) in concentrations exceeding 4,000 parts per million averaged 90 to 95 percent in pilot tests. These results are significant because, until now, washing processes have not proven effective in cleaning the small-size particles of silt and clay that make up most underwater sediments. In Thunder Bay, 81 percent of the particles were less than 38 microns (medium silt) in size. The tests on Thunder Bay sediment were conducted under the auspices of the Contaminated Sediment Treatment Technology Program of Environment Canada's Wastewater Technology Centre. Thunder Bay Harbour is one of 43 “areas of concern” identified by the International Joint Commission of Great Lakes Water Quality.     

Simultaneous Cr (VI) reduction and diazinon oxidation with organometallic sludge formation under photolysis: kinetics,degradation pathways,and mechanism

Environmental Science and Pollution Research - In this study, simultaneous removal of an organic matter (diazinon, DIZ) and an inorganic substance (chromium, Cr) was used. Breaking down of organic...     

Preparation and Optimization of Starch/Poly Vinyl Alcohol/ZnO Nanocomposite Films Applicable for Food Packaging

Pollution and destruction of the environment due to the accumulation of non-degradable plastics are some of the most important concerns in the world. A significant amount of this waste is related to the polymers used in food packaging. Therefore, experts in the food industry have been looking for suitable biodegradable alternatives to synthetic polymers. Preparing biocompatible and biodegradable films based on starch is a good choice. In this study, various factors affecting films of starch/polyvinyl alcohol (PVA)/containing ZnO nanoparticles such as the amount of starch, PVA, glycerol, and ZnO were evaluated by response surface methodology (RSM). Film formation by solvent casting method, mechanical properties, swelling, solubility, and water vapor permeability (WVP) were selected as responses of RSM. The results showed that hydrogen bonding interactions between polyvinyl alcohol and starch improved the film formation. The effect of glycerol and PVA content on the mechanical strength was contrary to each other. As the amount of PVA increased, the tensile strength first decreased and then increased. The value of WVP was for all Runs from 0 to 6.77?×?10^??8 g m^??1 s^??1 Pa^??1. Finally, films with high film formation, maximum tensile strength, and high elongation at break, minimum solubility, permeability, and swelling were optimized.

     

Embedded large eddy simulation approach for pollutant dispersion around a model building in atmospheric boundary layer

In the present article, the potential of embedded large eddy simulation (ELES) approach to reliably predict pollutant dispersion around a model building in atmospheric boundary layer is assessed. The performance of ELES in comparison with large eddy simulation (LES) is evaluated in several ways. These include a number of qualitative and quantitative comparisons of time-averaged and instantaneous results with wind tunnel measurements supplemented by statistical data analyses using scatter plots and standard evaluation metrics. Results obtained by both LES and ELES approaches show very good agreement with the experiment. However, addition of turbulence to mean flow at Reynolds averaged Navier–Stokes (RANS)–LES interface in ELES approach not only increases the turbulence intensity, it also results in larger values of turbulent kinetic energy (TKE) as well as a shorter reattachment length in the wake region. Accordingly, higher levels of TKE predicted by ELES increase the local intensity of concentration leading to shorter plume shapes as compared with LES. In general, ELES shows better agreement with experiment on the surfaces of model building and also in the downstream wake region. In terms of computational costs, the CPU time required to obtain statistical values in ELES is about 49 % lower than that of LES and the number of iterations per time step is also reduced by 55 % as compared with LES.     

Radioactivity and radiological risk associated with effluent sediment containing technologically enhanced naturally occurring radioactive materials in amang (tin tailings) processing industry

The processing of amang, or tin tailings, for valuable minerals has been shown to technologically enhance NORM and this has stirred significant radiological safety and health concerns among Malaysia's regulatory authority. A growing radiological concern is now focused on the amang effluent containing NORM in recycling ponds, since these ponds may be reclaimed for future residential developments. A study was carried out to assess the radiological risk associated with amang processing and the accumulated effluent in the recycling ponds. Twenty-six sediment samples from the recycling ponds of two amang plants in the states of Selangor and Perak, Malaysia, were collected and analyzed. The maximum activity concentrations of (238)U, (226)Ra, (232)Th and (40)K recorded in sediments from these ponds were higher than Malaysia's and the world's natural highest. Correspondingly, the mean radium equivalent activity concentration indices, Ra(eq), and gamma radiation representative level index, I(gammar), were higher than the world's average. The enhancement of NORM in effluent sediments as a consequence of amang processing, and the use of a closed water management recycling system created Effective Dose Rates, E (nSv h(-1)), that signal potential environmental radiological risks in these ponds, should they be reclaimed for future land use.     

Correction to: Effect of organic and inorganic phosphorus fertilizers on phosphorus availability and its leaching over incubation time

Environmental Science and Pollution Research - The correct presentation of the equations in Table 6 footnote is presented in this paper