Kinetics of the reduction of hexavalent chromium with the brown seaweed Ecklonia biomass

The dead biomass of the brown seaweed, Ecklonia sp., is capable of reducing toxic Cr(VI) into less toxic or nontoxic Cr(III). However, little is known about the mechanism of Cr(VI) reduction by the biomass. The objective of this work was to develop a kinetic model for Cr(VI) biosorption, for supporting our mechanism. The reduction rate of Cr(VI) increased with increasing total chromate concentration, [Cr(VI)], and equivalent concentration of organic compounds, [OCs], and decreasing solution pH. It was found that the reduction rate of Cr(VI) was proportional to [Cr(VI)] and [OCs], suggesting the simple kinetic equation -d[Cr(VI)]/dt=k[Cr(VI)][OCs]. When considering the consumption of organic compounds due to the oxidation by Cr(VI), an average rate coefficient of 9.33 (+/-0.65)microM(-1)h(-1) was determined, at pH 2. Although the function of the pH could not be expressed in a mechanistic manner, an empirical model able to describe the pH dependence was obtained. It is expected that the developed rate equation could likely be used for design and performance predictions of biosorption processes for treating chromate wastewaters.     

A novel biomonitoring system using microbial fuel cells

A novel biomonitoring system using microbial fuel cells for detecting the inflow of toxic substances into water systems has been developed for the purpose of on-site and on-line monitoring. The characteristics of electric current generation by electrochemically-active bacteria were conveniently monitored using a microbial fuel cell format and a computer-controlled potentiometer. When toxic substances (an organophosphorus compound, Pb, Hg, and PCBs) were added to the microbial fuel cell, rapid decreases in the current were observed. The inhibition ratios caused by inflow of these toxic substances (1 mg l(-1)) were 61%, 46%, 28% and 38%, respectively, when compared to the control, and generally increased in proportion to the addition time and concentration of toxic substances. When real wastewater was applied from a local wastewater treatment plant, more significant current decreases and higher inhibition ratios were observed following the introduction of toxic substances than in the laboratory tests. For example, the inhibition ratio was 76% on addition of a 1 mg l(-1) Cd and 1 mg l(-1) Pb mixture. Application of the microbial fuel cell for pollutant biomonitoring is discussed.     

Atmospheric deposition of polybrominated diphenyl ethers (PBDEs) in coastal areas in Korea

Atmospheric bulk samples were collected monthly, for one year, from urban, suburban, and rural sites located in the coastal areas of Korea, for the assessment of depositional fluxes and seasonal variations in atmospheric concentrations of PBDEs. Twenty individual PBDE congeners were found in atmospheric samples, and their depositional fluxes varied from 10.1 to 89.0 microg/m2/year. The highest depositional fluxes were found in two urbanized areas, with a strong urban-rural gradient. The relationship between PBDE and particulate depositional fluxes showed significant correlation for all locations, which suggested the association of PBDEs to particulate phase. Deca-BDE (BDE 209) was the predominant congener (>93%) in all deposition samples, which is consistent with a high consumption of deca-BDE for the flame-retardant market in Korea. Seasonal variability was observed in PBDE concentrations for the two urban sites, whereas no seasonal trend was found for either the suburban or the rural location.     

Polybrominated diphenyl ethers (PBDEs) in sediment and bivalves from Korean coastal waters

Concentrations of polybrominated diphenyl ethers (PBDEs) were determined in sediment and bivalves collected from 25 coastal locations in Korea. Twenty major PBDE congeners were found in all sediment and bivalve samples. SigmaPBDE20 concentrations ranged from 0.45 to 494 ng/g, dry weight (average 27.8 ng/g dry weight) in sediments, and from 0.38 to 9.19 ng/g, wet weight (average 2.94 ng/g wet weight) in bivalves. The highest concentrations were found at locations near industrial complexes and large harbors, suggesting that human activities contribute to PBDEs contamination in Korean coastal environment. PBDE concentrations measured in our study, excluding BDE congener 209 (deca-BDE), in sediment and bivalves were lower than those reported from other countries; whereas BDE 209 concentrations were comparable to or higher than those reported from other countries. The predominant PBDE congener in sediments and bivalves was deca-BDE, which accounted for >90% and >60% of the total PBDE concentrations in sediment and bivalves, respectively. This is consistent with high consumption of deca-BDE for the flame-retardant market in Korea. Significant correlations existed among BDEs 28, 47, 99, 100, 153 and 154 in sediments and bivalves; however, BDEs 183 and 209 showed little correlation compared with less highly brominated congeners.     

Simultaneous leaching and carbon sequestration in constrained aqueous solutions

The behavior of metal ions’ leaching and precipitated mineral phases of metal-rich fly ash (FA) was examined in order to evaluate microbial impacts on carbon sequestration and metal immobilization. The leaching solutions consisted of aerobic deionized water (DW) and artificial eutrophic water (AEW) that was anaerobic, organic- and mineral-rich, and higher salinity as is typical of bottom water in eutrophic algae ponds. The Fe- and Ca-rich FAs were predominantly composed of quartz, mullite, portlandite, calcite, hannebachite, maghemite, and hematite. After 86 days, only Fe and Ca contents exhibited a decrease in leaching solutions while other major and trace elements showed increasing or steady trends in preference to the type of FA and leaching solution. Ca-rich FA showed strong carbon sequestration efficiency ranging up to 32.3 g CO₂/kg FA after 86 days, corresponding to almost 65% of biotic carbon sequestration potential under some conditions. Variations in the properties of FAs such as chemical compositions, mineral constituents as well as the type of leaching solution impacted CO₂ capture. Even though the relative amount of calcite increased sixfold in the AEW and the relative amount of mineral phase reached 37.3 wt% using Ca-rich FA for 86 days, chemical sequestration did not accomplish simultaneous precipitation and sequestration of several heavy metals.     

Recycling of tailings from Korea Molybdenum Corporation as admixture for high-fluidity concrete

The main objective of this study is to develop an eco-friendly and a large recycling technique of flotation Tailings from korea (TK) from metal mines as construction materials such as admixtures for high-fluidity concrete (HFC). TK used in this study was obtained from the Korea Molybdenum Corporation in operation. TK was used as the alternative material to adjust flowability and viscosity of HFC in the form of powder agent which enables adjustment of concrete compressive strength. In this study, we have performed concrete rheological tests and concrete flowability tests to obtain the quality characteristics of TK for using as the admixture in producing HFC. The results indicated that the adequate mix ratio of cement to TK should be 8:2 (vol%). It is more effective to use the TK as admixture to control flowability, viscosity and strength of HFC than the normal concrete. It was found that TK could be recycled construction materials in bulk such as admixture for HFC, in terms of the economic and eco-friendly aspects.     

Kinetic and mechanism studies of the adsorption of lead onto waste cow bone powder (WCBP) surfaces

This study examines the adsorption isotherms, kinetics and mechanisms of Pb²⁺ sorption onto waste cow bone powder (WCBP) surfaces. The concentrations of Pb²⁺ in the study range from 10 to 90 mg/L. Although the sorption data follow the Langmuir and Freundlich isotherm, a detailed examination reveals that surface sorption or complexation and co-precipitation are the most important mechanisms, along with possibly ion exchange and solid diffusion also contributing to the overall sorption process. The co-precipitation of Pb²⁺ with the calcium hydroxyapatite (Ca-HAP) is implied by significant changes in Ca²⁺ and PO₄ ^3? concentrations during the metal sorption processes. The Pb²⁺ sorption onto the WCBP surface by metal complexation with surface functional groups such as ≡ POH. The major metal surface species are likely to be ≡ POPb⁺. The sorption isotherm results indicated that Pb²⁺ sorption onto the Langmuir and Freundlich constant q _max and K _F is 9.52 and 8.18 mg g^?1, respectively. Sorption kinetics results indicated that Pb²⁺ sorption onto WCBP was pseudo-second-order rate constants K ₂ was 1.12 g mg^?1 h^?1. The main mechanism is adsorption or surface complexation (≡POPb⁺: 61.6%), co-precipitation or ion exchange [Ca_3.93 Pb_1.07 (PO₄)₃ (OH): 21.4%] and other precipitation [Pb 50 mg L^?1 and natural pH: 17%). Sorption isotherms showed that WCBP has a much higher Pb²⁺ removal rate in an aqueous solution; the greater capability of WCBP to remove aqueous Pb²⁺ indicates its potential as another promising way to remediate Pb²⁺-contaminated media.     

Characterization of polychlorinated dibenzo-p-dioxins and dibenzofurans in different particle size fractions of marine sediments

The distribution of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) was examined according to particle size in marine sediments, with a particular focus on fine particulates. Samples from different coastal sites were fractionated into five size groups (<2, 2-5, 5-10, 10-20, and 20-63 microm diameter) by gravitational split-flow thin fractionation. Despite the different size profiles and PCDD/F contents of the sediments at each site, PCDD/F levels in fractionations tended to increase as the particle size decreased; the PCDD/F levels in the finest particles were up to 16 times higher than in the coarsest particles, which was associated with their organic carbon contents. Log normalization showed high levels of PCDD/Fs in the fine silt particles (2-10 microm), which are consumable by aquatic biota. Because of the different toxicity and bioavailability of PCDD/Fs in different sediment particle sizes, it is important to study particle actions to understand their effects on the aquatic ecosystem.     

Dissolved organic matter effects on the performance of a barrier to polycyclic aromatic hydrocarbon transport by groundwater

In order to contain the movement of organic contaminants in groundwater, a subsurface sorption barrier consisting of sand or clay minerals coated with a cationic surfactant has been proposed. The effectiveness of such a sorption barrier might be affected by the presence of dissolved organic matter (DOM) in the groundwater. To study the impact of DOM on barrier performance, a series of batch experiments were performed by measuring naphthalene and phenanthrene sorption onto sand coated with cetylpyridinium chloride (CPC) and bentonite coated with hexadecyltrimethylammonium bromide (HDTMA) in the presence of various concentrations of DOM. The overall soil-water distribution coefficient (K*) of naphthalene and phenanthrene onto CPC-coated sand decreased with increasing DOM concentration, whereas the K* of the compounds onto HDTMA-coated bentonite slightly increased with increasing DOM concentration. To describe the overall distribution of polycyclic aromatic hydrocarbons (PAHs) in the systems, a competitive multiphase sorption (CMS) model was developed and compared with an overall mechanistic sorption (OMS) model. The modeling studies showed that while the OMS model did not explain the CPC-coated sand experimental results, a model that included competitive sorption between DOM and PAH did. The experimental results and the modeling study indicated that there was no apparent competition between DOM and PAH in the HDTMA-coated bentonite system, and indicated that in groundwater systems with high DOM, a barrier using HDTMA-coated bentonite might be more effective.     

A kinetic study on oxidation of pentachlorophenol by ozone

The kinetics of pentachlorophenol (PCP) ozonation in terms of the gaseous O3 and dissolved PCP concentrations has been investigated. When the O3 concentration in the gas phase was in the range of 10 to 40 g O3/m3, the O3 dissolved for a short time period was proportional to the gaseous O3 concentration. In this range, the ozonation reaction was first order for each reactant and the overall reaction was second order. At 25 degrees C, in an aqueous solution, the reaction rate constant was estimated to be 10.048 L/mol.sec. The reaction rate was much greater than the mass-transfer rate, indicating that the reaction of O3 and PCP was an interface reaction on the surface of gaseous O3 bubbles. The final product of the PCP ozonation was oxalic acid, with the carbon yield of the reaction being 59.4%. The ozonation of PCP in the aqueous solution was not a radical reaction but a direct reaction between O3 and PCP molecules under the conditions investigated in this study, since O3 has a high selectivity toward PCP. The reaction rate increased with the reaction temperature up to 35 degrees C but decreased at temperatures greater than 35 degrees C due to the decreased solubility of O3. The addition of H2O2 did not increase the reaction rate significantly.