Determining storm sampling requirements for improving precision of annual load estimates of nutrients from a small forested watershed

This study sought to determine the lowest number of storm events required for adequate estimation of annual nutrient loads from a forested watershed using the regression equation between cumulative load (∑L) and cumulative stream discharge (∑Q). Hydrological surveys were conducted for 4 years, and stream water was sampled sequentially at 15-60-min intervals during 24 h in 20 events, as well as weekly in a small forested watershed. The bootstrap sampling technique was used to determine the regression (∑L-∑Q) equations of dissolved nitrogen (DN) and phosphorus (DP), particulate nitrogen (PN) and phosphorus (PP), dissolved inorganic nitrogen (DIN), and suspended solid (SS) for each dataset of ∑L and ∑Q. For dissolved nutrients (DN, DP, DIN), the coefficient of variance (CV) in 100 replicates of 4-year average annual load estimates was below 20% with datasets composed of five storm events. For particulate nutrients (PN, PP, SS), the CV exceeded 20%, even with datasets composed of more than ten storm events. The differences in the number of storm events required for precise load estimates between dissolved and particulate nutrients were attributed to the goodness of fit of the ∑L-∑Q equations. Bootstrap simulation based on flow-stratified sampling resulted in fewer storm events than the simulation based on random sampling and showed that only three storm events were required to give a CV below 20% for dissolved nutrients. These results indicate that a sampling design considering discharge levels reduces the frequency of laborious chemical analyses of water samples required throughout the year.     

Decolorization and estrogenic activity of colored livestock wastewater after electrolysis treatment

Livestock wastewater is treated by activated sludge treatment. Untreated livestock wastewater has high estrogen activity because animal excreta contains estrogen. When activated sludge treatment is applied, the estrogen activity declines or is lost. However, the color of treated livestock wastewater is deep brownish-red because of the decomposition of organic compounds or the synthesis of metabolites. Discharging colored wastewater to the environment could cause some problems, so it is necessary to decolorize colored wastewater before it is discharged. It has been suggested that electrolysis decolorization technology is suitable for treating colored wastewater; however, the process produces volatile organic compounds (VOCs). In fact, little research has been conducted with reference to estrogen activity in wastewater that has undergone electrolysis, especially on the contribution of the electrolysis decolorization process to estrogen activity, i.e., the possibility of resynthesis of some substance with estrogen activity due to resolved and metabolized colored components. In this study, the concentration of VOC was measured for various electrolysis conditions, and estrogen activity was examined using a yeast two-hybrid assay. From the results, decolorization of colored livestock wastewater by electrolysis was possible, and the VOC generation during electrolysis could be controlled depending on the electrolysis conditions. Estrogen activity in colored livestock wastewater disappeared on electrolysis decolorization.     

Sensitivity analyses of factors influencing CMAQ performance for fine particulate nitrate

Improvement of air quality models is required so that they can be utilized to design effective control strategies for fine particulate matter (PM_2.5). The Community Multiscale Air Quality modeling system was applied to the Greater Tokyo Area of Japan in winter 2010 and summer 2011. The model results were compared with observed concentrations of PM_2.5 sulfate (SO₄^2-), nitrate (NO₃^?) and ammonium, and gaseous nitric acid (HNO₃) and ammonia (NH₃). The model approximately reproduced PM_2.5 SO₄^2? concentration, but clearly overestimated PM_2.5 NO₃^? concentration, which was attributed to overestimation of production of ammonium nitrate (NH₄NO₃). This study conducted sensitivity analyses of factors associated with the model performance for PM_2.5 NO₃^? concentration, including temperature and relative humidity, emission of nitrogen oxides, seasonal variation of NH₃ emission, HNO₃ and NH₃ dry deposition velocities, and heterogeneous reaction probability of dinitrogen pentoxide. Change in NH₃ emission directly affected NH₃ concentration, and substantially affected NH₄NO₃ concentration. Higher dry deposition velocities of HNO₃ and NH₃ led to substantial reductions of concentrations of the gaseous species and NH₄NO₃. Because uncertainties in NH₃ emission and dry deposition processes are probably large, these processes may be key factors for improvement of the model performance for PM_2.5 NO₃^?.

Implications: The Community Multiscale Air Quality modeling system clearly overestimated the concentration of fine particulate nitrate in the Greater Tokyo Area of Japan, which was attributed to overestimation of production of ammonium nitrate. Sensitivity analyses were conducted for factors associated with the model performance for nitrate. Ammonia emission and dry deposition of nitric acid and ammonia may be key factors for improvement of the model performance.     

Polychlorinated biphenyl levels in the blood of Japanese individuals ranging from infants to over 80 years of age

Individuals’ exposure to various persistent organic pollutants (POPs), including polychlorinated biphenyls (PCBs), and its adverse health effects have been a cause of concern. We measured blood PCB concentrations from samples taken from 507 Japanese individuals ranging from infants to those over 80 years of age. The blood PCB levels increased with age for both male (Spearman’s r?=?0.69, p?<?0.001) and female (Spearman’s r?=?0.70, p?<?0.001) participants. Adult men and nulliparous women showed similar increases with age. However, the PCB levels of multiparous women were lower than those of nulliparous women in their thirties (p?=?0.005), probably because the PCBs were transferred from the mothers to their children during pregnancy and lactation. Among infants (<2 years of age), some had as high levels of accumulated PCB levels as those in adults >30 years of age. In some cases, the PCB levels were over 0.8 ng/g wet weight, similar to levels observed in adults over 50 years of age. In the future, it will be necessary to do research on the health of the children who are exposed by high concentration level of POPs.     

Current Mode Atomic Force Microscopy (C-AFM) Study for Local Electrical Characterization of Conjugated Polymer Blends

A blend of regioregular poly(3-hexylthiophene) (P3HT) and poly{[N,N′-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5′-(2,2′-bithiophene)} (P(NDI2OD-T2), which has the potential for polymer solar cells application, was prepared for current mode atomic force microscopy (C-AFM) measurements in this study. Phase-separated domains and the local electrical characteristics of P3HT/P(NDI2OD-T2) blends were investigated by the C-AFM.     

High temperature air-blown woody biomass gasification model for the estimation of an entrained down-flow gasifier

A high temperature air-blown gasification model for woody biomass is developed based on an air-blown gasification experiment. A high temperature air-blown gasification experiment on woody biomass in an entrained down-flow gasifier is carried out, and then the simple gasification model is developed based on the experimental results. In the experiment, air-blown gasification is conducted to demonstrate the behavior of this process. Pulverized wood is used as the gasification fuel, which is injected directly into the entrained down-flow gasifier by the pulverized wood banner. The pulverized wood is sieved through 60 mesh and supplied at rates of 19 and 27kg/h. The oxygen-carbon molar ratio (O/C) is employed as the operational condition instead of the air ratio. The maximum temperature achievable is over 1400K when the O/C is from 1.26 to 1.84. The results show that the gas composition is followed by the CO-shift reaction equilibrium. Therefore, the air-blown gasification model is developed based on the CO-shift reaction equilibrium. The simple gasification model agrees well with the experimental results. From calculations in large-scale units, the cold gas is able to achieve 80% efficiency in the air-blown gasification, when the woody biomass feedrate is over 1000kg/h and input air temperature is 700K.     

Can market-based policies accomplish the optimal floodplain management? A gap between static and dynamic models

The purpose of this short article is to set static and dynamic models for optimal floodplain management and to compare policy implications from the models. River floodplains are important multiple resources in that they provide various ecosystem services. It is fundamentally significant to consider environmental externalities that accrue from ecosystem services of natural floodplains. There is an interesting gap between static and dynamic models about policy implications for floodplain management, although they are based on the same assumptions. Essentially, we can derive the same optimal conditions, which imply that the marginal benefits must equal the sum of the marginal costs and the social external costs related to ecosystem services. Thus, we have to internalise the external costs by market-based policies. In this respect, market-based policies seem to be effective in a static model. However, they are not sufficient in the context of a dynamic model because the optimal steady state turns out to be unstable. Based on a dynamic model, we need more coercive regulation policies.     

IoT technologies in smart environment: security issues and future enhancements

Environmental Science and Pollution Research - IoT plays an important role in the overall development and advancement of the country as it is the key ingredient for the development of the smart...     

Woodchip-mixing porous mortar’s adsorption of cesium in aqueous media

Journal of Material Cycles and Waste Management - The radioactive cesium (radio-Cs) released following the Fukushima Daiichi Nuclear Power Plant accident was unevenly distributed in soil, sediment,...