Converting moving-grate incineration from combustion to gasification - numerical simulation of the burning characteristics

Waste incineration is a politically sensitive issue in the UK. The major current technology is based on direct combustion of wastes in a moving-grate furnace. However, general public opinion prefers non-direct burning technologies. Waste gasification is one of those nearest technologies available. By reducing the primary air-flow rate through the grate of a packed-bed system, operation of the existing solid-waste incineration equipment can be easily converted from combustion mode to gasification mode without major modification of the hardware. The potential advantages of this are lower dust carry-over in the flue gases, lower bed temperature (and therefore lower NO(x) formation in the bed), simplified gas-treatment procedures and lower running cost, among other benefits. The major disadvantages are, however, reduced throughput of the wastes and possibly higher carbon in the ash at exit. In this study, numerical simulation of both combustion and gasification of municipal solid wastes in a full-scale moving grate furnace is carried out employing advanced mathematical models. Burning characteristics, including burning rate, gas composition, temperature and burning efficiency as a function of operating parameters are investigated. Detailed comparisons between the combustion mode and gasification mode are made. The study helps to explore new incineration technology and optimise furnace operating conditions.     

Effect of heavy metal contaminated shooting range soils on mycorrhizal colonization of roots and metal uptake by leek

We grew leek (Allium porrum) in soils of two shooting ranges heavily contaminated with heavy metals in the towns of Zuchwil and Oberuzwil in Switzerland as a bioassay to test theactivity of arbuscular mycorrhizal (AM) fungi in these soils.Soil samples were taken from (1) front of the shooting house(HOUSE), (2) the area between house and target (FIELD) and (3) the berm (BACKSTOP). Samples of Ribwort plantain (Plantagolanceolata) growing naturally within the shooting ranges werealso collected and the colonization of its roots by mycorrhizalfungi was measured. The number of AM spores in the soils wassignificantly reduced concomitant with the increase in thedegree of soil contamination with metals. In Zuchwil,mycorrhizal fungi equally colonized roots of Ribwort plantainsampled from BACKSTOP and HOUSE. In Oberuzwil, however, plantsfrom BACKSTOP had lower colonization when compared with thosesampled from HOUSE. Colonization of leek was strongly reducedin the BACKSTOP soil of Zuchwil and slightly reduced in theBACKSTOP soil of Oberuzwil when compared with plants grown inrespective HOUSE soil. Concentrations of Cd, Cr, Cu, Ni, Pb andZn in the leaves of leek grown in the BACKSTOP soil was withinthe range considered toxic for human consumption. This pointsto the high degree of bio-availability of these metal in thesesoils. Significant decrease in the number of mycorrhizal sporesin the BACKSTOP soils in Zuchwil and the low colonization ofleek roots grown in these soils point to possible changes inthe species diversity of mycorrhizal fungi in these soils.     

Temperature Induced Predation Impact of Mosquitofish (Gambusia affinis) on Growth,Development, and Survival of Larvae and Tadpole of Bufotes variabilis (Amphibia: Anura)

Russian Journal of Ecology - There are increasing evidences documenting the negative impact of exotic species including mosquitofish, Gambosi affinis, in Iran. Meanwhile, recent climate change in...     

Characterisation of particulate matter on the receptor level in a city environment

Airborne particulate matter (PM) has become one of the dominant pollutants with the increasing material and energy demand due to global economic growth. The main objective of this research is to provide a comprehensive receptor level characterisation of the particulate matter collected in a city environment. Particulate matter samples were collected on Tapered Element Oscillating Microbalance (TEOM) filters from five monitoring sites over a period of 1 year. An Andersen eight-stage cascade impactor was also used to collect airborne PM samples from three other locations to compare with the samples collected by TEOM. All the samples were then subjected to individual particle morphology and chemical composition analysis by SEM/EDS. Bulk chemical composition of the samples were also analysed through ICP–OES. Based on these analyses, possible sources of the PM samples were identified. The results showed that the monitoring sites in residential environments were dominated by transportation-derived particles and other migratory particulates. Monitoring sites near the city centre were dominant by particles from transportation, with biological particles abundant for the site closer to a river. The monitoring station located close to the industrial area, despite only 200 m away from a motorway, has low contribution of non-exhaust particulates from vehicles. Instead, the particulates collected from this site were dominated by industrial sources. An air dispersion modelling package was also used to model the particulate matter dispersion in the city area for the period of sampling. The results from the model showed that the points of high emissions were around industrial areas.     

Room temperature synthesis of 2H-1,4-benzoxazine derivatives using a recoverable ionic liquid medium

2H-1,4-Benzoxazines are major heterocyclic compounds with interesting biological and synthetic applications. Therefore, it would be very interesting to develop new efficient methods for their synthesis. Here, we synthesized 2H-1,4-benzoxazines in one pot using K₂CO₃/H₂O in the ionic liquid of choice, [omim][BF₄]. After reactions, products are extracted from [omim][BF₄] by Et₂O and the ionic liquid is recovered and successfully reused over several recycles. Results show that high yields of 3-aryl-2H-1,4-benzoxazine derivatives are obtained chemoselectively at room temperature from their corresponding o-aminophenols and phenacyl bromides. To our knowledge, our method represents the most efficient and straightforward route for the synthesis of 3-aryl-2H-1,4-benzoxazine derivatives in short times and under environmentally benign conditions.     

An integrated approach to assessing the environmental and health impacts of pollution in the urban environment: Methodology and a case study

This paper presents a new decision-support methodology and software tool for sustainable management of urban pollution. A number of different methods and tools are integrated within the same platform, including GIS, LCA, fate and transport modelling, health impact assessment and multi-criteria decision analysis. The application of the framework is illustrated on a case study which investigates the environmental and health impacts of pollution arising from different industrial, domestic and transport sources in a city. The example city chosen for the study is Sheffield, UK, and the main pollutants considered are NO_x, SO₂ and PM10. The results suggest that the absence of the current large industrial sources in the city would lead to a 90% reduction of the SO₂ and 70% of the NO₂ ground concentrations, consequently preventing 27 deaths and 18 respiratory hospital admissions per annum for a population of 500,000. Based on the total annual mortality and hospital admissions in Sheffield for the year of the assessment, this means that 0.53% of premature deaths and 0.49% of respiratory hospital admissions would be prevented by the estimated reduction in air pollution.     

A stochastic stormwater quality volume-sizing method with first flush emphasis

A Monte Carlo simulation technique was applied to assess the effect of stormwater quality volume captured by best management practices (BMPs) on the frequency of discharging concentrations of constituents above certain designated threshold limits. The method used an assumption of a power law relationship between the cumulative load and flow to incorporate the first flush effect. The exponent of this relationship was considered a random variable and its frequency distribution was obtained from 78 measured pollutographs from three urban highway sites in West Los Angeles, California. Although the effect of rain depth captured by BMPs is site-specific, the method offered here provides a systematic approach to evaluate the effect of selecting various regulatory guidelines for controlling urban stormwater pollution on the overall discharge of pollutants into waterways. This allows selecting the requirements for capturing runoff volume by BMPs based on the tradeoff between the probability of concentration criteria violation and economic factors.     

On-line detection of metal pollutant spikes in MSW incinerator flue gases prior to clean-up

SUWIC's unique mobile metals emissions monitoring laboratory has been used to measure metal pollutant spikes in the flue gas from a municipal solid waste incinerator, prior to gas clean-up. The laboratory has a heated sampling probe that extends into the plant, allowing the simultaneous on-line measurement of the concentrations of more than 30 metals by Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES). As little is known about temporal variation in metal concentrations, this capability is seen as a major advance. The graphs of continuous measurements show that the elemental loading is far from uniform, and that concentrations fluctuate far more than may have been conventionally expected. There are occasional significant spikes in the emission profiles for cadmium and mercury, which are believed to be due to specific items in the waste feed material. Continuous monitoring measurements are of significant value for those seeking to model metal behaviour in combustion and in pollution control devices.     

The literature landscape on peace–sustainability nexus: A scientometric analysis

Academics, policymakers, and practitioners have long considered peace and sustainability to be fundamentally linked. However, despite the increased attention paid toward the intersection of peace and sustainability, there is still limited knowledge on the nature of their linkages. To advance the current understanding on the peace–sustainability nexus and inform an integrated research agenda, this paper employs a scientometric analysis of literature to identify publication trends, thematic clusters, and knowledge gaps. Analyzing the publications according to the types of peace, the pillars of positive peace, the dimensions of sustainability, and the SDGs further reveals weak engagement among academic disciplines and across the SDGs. The results of this analysis emphasize the need for future research to focus on underexamined subjects, geographic regions, and sectors to bolster the linkages between peace and sustainability.Electronic supplementary materialThe online version of this article (10.1007/s13280-020-01388-8) contains supplementary material, which is available to authorized users.