Calcined Oil Shale Semi-coke for Significantly Improved Performance Alginate-Based Film by Crosslinking with Ca2+

Journal of Polymers and the Environment - Oil shale semi-coke (OSSC) is the residual solid waste after refining of oil shale, which principally contains organic matter and minerals. The common...     

ZnO-based heterostructures as photocatalysts for hydrogen generation and depollution: a review

Environmental Chemistry Letters - Energy shortage and escalating pollution are major challenges globally. Heterogeneous photocatalysis is one of the most cost-effective methods for producing...     

Enhanced organic phosphorus detection in sediments by foam separation and 31P-NMR

Phosphorus (P) is both a nutrient and a pollutant. For instance, excess P induces water eutrophication followed by death of fishes and other water life. Determination of organic P content in sediments is therefore important to study P cycling and environmental pollution. The most widely used method to determine organic P in sediments is NaOH–EDTA extraction followed by ³¹P-NMR detection. However, some organic P compounds are difficult to extract using NaOH–EDTA due to the low solubility, thus can not be detected by ³¹P NMR. Here, we used foam separation to determine organic P in sediment of North Canal of Tianjin City, China. Organic P was first enriched using foam separation coupled with NaOH extraction. The enriched organic P was then analyzed with ³¹P NMR. The results showed that, compared with the traditional extraction method, foam separation coupled with NaOH extraction enriched more P compound because ³¹P NMR detected an extra signal of teichoic acid at chemical shift 1.14. This teichoic acid signal was not detected in the extract prepared using only NaOH–EDTA. Our finding demonstrates that determination using foam separation followed by ³¹P NMR is feasible.     

Estimates of residual dairy manure nitrogen availability using various techniques

It is common practice to repeatedly apply dairy manure to the same fields. To accurately assess the total plant availability of manure nutrients, it is necessary to account for the nutrients remaining in soil from previous manure applications. A field experiment studying manure nitrogen (N) uptake by corn (Zea mays L.) was conducted from 1998 to 2003 on a Plano silt loam (fine-silty, mixed, mesic, Typic Argiudolls). Plots received two rates of semisolid manure either every year, every 2 yr, or every 3 yr to estimate first-, second-, and third-year dairy manure N residuals. Residual manure N availability was estimated from single and multiple manure applications using (i) the fertilizer N equivalence method, (ii) the apparent recovery (difference) method, (iii) relative effectiveness method, and (iv) recovery of (15)N-labeled manure. Second-year availabilities after a single manure application using the fertilizer equivalence, difference, and relative effectiveness methods were estimated to be 12, 8, and 4% of total manure N applications, respectively. Estimates of third-year availability by these methods were 3, 1, and 5%, respectively. Measurement of (15)N recovered from labeled manure was 6 and 2% in the second and third year, respectively. Fertilizer equivalence, difference, and relative effectiveness methods showed great year to year variability, reducing the confidence in the residual manure N availability estimates by these methods, but using (15)N-labeled manures reduced variability substantially. Based on this and other studies, we suggest that second- and third-year residual N availability from a single application of semisolid dairy manure would be 9 to 12%, and 3 to 5% of the original manure N application, respectively.     

Sustainable Use of Coffee Husks For Reinforcing Polyethylene Composites

The utilization of the coffee husk fiber (CHF) from the coffee industry as a reinforcing filler in the preparation of a cost-effective thermoplastic based composite was explored in this study. The chemical composition and thermal properties of the CHF were investigated and compared with those of wood fiber (WF). CHF proved to be mainly composed of cellulose, hemicellulose and lignin, and exhibited similar thermal behavior to WF. High density polyethylene (HDPE) composites with CHF loadings of from 40 to 70% were prepared using melt processing and extrusion. The processing properties, mechanical behavior, water absorption and thermal performance of these composites were investigated. The effect of maleated polyethylene (MAPE) used as a coupling agent on the composite was explored. The experimental results showed that increasing the CHF loading in the HDPE matrix resulted in an increase in the modulus and thermal properties of the composites, but resulted in poor water resistance. The addition of a 4% MAPE significantly improved the interfacial behavior of the hydrophilic lignocellulosic fiber and the hydrophobic polymer matrix.     

Transfer of Graphene CVD to Surface of Low Density Polyethylene (LDPE) and Poly(butylene adipate-co-terephthalate) (PBAT) Films: Effect on Biodegradation Process

Here, the influence of graphene as a coating on the biodegradation process for two different polymers is investigated, poly(butylene adipate-co-terephthalate) (PBAT) (biodegradable) and low-density polyethylene (LDPE) (non-biodegradable). Chemical vapor deposition graphene was transferred to the surface of two types of polymers using the Direct Dry Transfer technique. Polymer films, coated and uncoated with graphene, were buried in a maturated soil for up to 180 days. The films were analyzed before and after exposure to microorganisms in order to obtain information about the integrity of the graphene (Raman Spectroscopy), the biodegradation mechanism of the polymer (molecular weight and loss of weight), and surface changes of the films (atomic force microscopy and contact angle). The results prove that the graphene coating acted as a material to control the biodegradation process the PBAT underwent, while the LDPE covered by graphene only had changes in the surface properties of the film due to the accumulation of solid particles. Polymer films coated with graphene may allow the production of a material that can control the microbiological degradation, opening new possibilities in biodegradable polymer packaging. Regarding the possibility of graphene functionalization, the coating can also be selective for specific microorganisms attached to the surface.     

峡山地不同垂直带土壤层的水文功能及其影响因子

渗透性能和持水能力是土壤重要的水力学性质,是土壤调节径流、保持水土和涵养水源等水文功能的基础。以三峡库首的夷陵-大老岭山地为对象,采集亚高山棕壤针叶林地、中山黄棕壤针阔混交林与茶园地和低山黄壤针叶林地等4个样点剖面的土壤样品,在室内进行土壤饱和导水率、水分特征曲线和理化性质测定,量化了不同样地土壤渗透性能、持水能力和水分库容等水文功能参数,并明确了其主要影响因子。结果表明: 研究区山地土壤饱和导水率在0.06～14.78 mm/min之间,亚高山棕壤和中山黄棕壤林地土壤渗透性能较好,其平均饱和导水率在7.15～14.78 mm/ min之间,低山黄壤次之（1.3 9 mm/min）,中山黄棕壤茶园土壤渗透能力最差（1.17 mm/min）。不同类型土壤的饱和含水量、毛管含水量、田间持水量存在较大差异,凋萎含水量差异较小。同一类型土壤的不同发生层内,土壤饱和含水量随土壤深度的增加而递减,毛管持水量和田间持水量随土层深度的增加波动上升。不同样地间土壤水分总库容差异较大,随着海拔的升高,土壤水分总库容增加。土壤水分特征参数与土壤性质的相关分析表明,饱和导水率与土壤总孔隙度呈显著正相关,与容重呈显著负相关;饱和含水量、毛管持水量、田间持水量均与土壤总孔隙度、粘粒含量呈显著性正相关,与容重呈显著负相关;饱和含水量与根系重量呈显著正相关;毛管持水量、田间持水量与砂粒含量呈显著负相关。与中山茶园地和低山黄壤林地相比,亚高山棕壤和中山黄棕壤林地渗透性能较好且持水性更强,具有更好的调蓄径流和涵养水源的水文功能。 关键词： 山地土壤;土壤孔隙度;饱和导水率;持水能力;三峡库区     

Synthesis,Characterization and Environmental Applications of a New Bio-Composite Gelatin-Zr(IV) Phosphate

Gelatin-Zr(IV) phosphate composite (GT/ZPC) was synthesized by sol–gel method. Different techniques viz. Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray powdered diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used for the characterisation of GT/ZPC composite ion exchanger. The ion exchange capacity (IEC) of GT/ZPC was observed to be better (1.04 meq g^?1) than its inorganic counterpart (0.64 meq g^?1). The pH studies revealed the monofunctional nature of GT/ZPC with one inflection point. The distribution studies showed that the GT/ZPC was highly selective for Cd²⁺ as compare to other metal ions. The environmental applicability of ion exchanger has been analysed for binary separations of metal ions using column method. Cd²⁺ was effectively removed from synthetic mixture of metal ions (Zn²⁺, Pb²⁺, Ni²⁺, Co²⁺ and Cu²⁺).     

The progress of interdisciplinarity in invasion science

Interdisciplinarity is needed to gain knowledge of the ecology of invasive species and invaded ecosystems, and of the human dimensions of biological invasions. We combine a quantitative literature review with a qualitative historical narrative to document the progress of interdisciplinarity in invasion science since 1950. Our review shows that 92.4% of interdisciplinary publications (out of 9192) focus on ecological questions, 4.4% on social ones, and 3.2% on social–ecological ones. The emergence of invasion science out of ecology might explain why interdisciplinarity has remained mostly within the natural sciences. Nevertheless, invasion science is attracting social–ecological collaborations to understand ecological challenges, and to develop novel approaches to address new ideas, concepts, and invasion-related questions between scholars and stakeholders. We discuss ways to reframe invasion science as a field centred on interlinked social–ecological dynamics to bring science, governance and society together in a common effort to deal with invasions.     

硅藻土固定化颗粒污泥对海水养殖废水除氨性能

针对实际海水养殖废水低碳高氮的特点,采用间歇式活性污泥法(SBR)和好氧活性污泥添加硅藻土载体的方式,考察硅藻土载体和活性污泥共同作用下的好氧曝气系统对海水养殖废水中氨态氮(NH+4-N)、亚硝酸态氮(NO-2-N)和化学耗氧量(COD)的去除效果,以及对污泥沉降性能和硝化细菌特征的影响。实验结果表明,常温条件下,溶解氧(DO)≥4.5mg/L,p H控制在7.0~8.0,HRT为11 h,沉降时间10 min,反应器可以处理NH+4-N浓度在50 mg/L左右的海水养殖废水,NH+4-N和COD去除率分别达到98.93%左右和76.62%以上,NO-2-N出水浓度低于0.028 mg/L。载体污泥颗粒照片和扫描电镜结果表明,添加硅藻土载体内核后,颗粒污泥的成熟期缩短,颗粒的稳固度和沉降性能提高。在系统启动成功稳定运行后,通过FISH分析表明,在氨氧化菌(AOB)与亚硝酸盐氧化菌(NOB)成为优势菌群后,AOB大约占总菌群的33.5%,并且AOB与NOB菌群数量约为1∶1.33,AOB和NOB两大类菌群之和约占总菌群的77.2%,成为系统中优势菌群。