Evaluating the environmental effects of economic openness: evidence from SAARC countries

Environmental Science and Pollution Research - This study investigates the possible environmental effects of economic openness, such as economic growth, foreign direct investment (FDI) inflows, and...     

Hydrous ferric oxide nanoparticles hosted porous polyethersulfone adsorptive membrane: chromium (VI) adsorptive studies and its applicability for water/wastewater treatment

In this present study, adsorptive membranes for Cr(VI) ion removal were prepared by blending polyethersulfone (PES) with hydrous ferric oxide (HFO) nanoparticles (NPs). The effects of HFO NPs to PES weight ratio (0–1.5) on the physicochemical properties of the resultant HFO/PES adsorptive membranes were investigated with respect to the surface chemistry and roughness as well as structural morphologies using different analytical instruments. The adsorptive performance of the HFO NPs/PES membranes was studied via batch adsorption experiments under various conditions by varying solution pH, initial concentration of Cr(VI), and contact time. The results showed that the membrane made of HFO/PES at a weight ratio of 1.0 exhibited the highest adsorption capacity which is 13.5 mg/g. Isotherm and kinetic studies revealed that the mechanism is best fitted to the Langmuir model and pseudo-second-order model. For filtration of Cr(VI), the best promising membranes showed improved water flux (629.3 L/m² h) with Cr(VI) ion removal of 75%. More importantly, the newly developed membrane maintained the Cr(VI) concentration below the maximum contamination level (MCL) for up to 9 h.

     

Comparison effect of feedstock to inoculum ratios on biogas yields of cafeteria,vegetable, fruit wastes with cattle manure using co-digestion process

Cafeteria, vegetable, fruit, and cattle manure are available year around at low cost and have the potential to complement each other for anaerobic digestion (AD). The objectives of this study were to determine the preferred mixing ratios and effects of feedstock to inoculum ratios for the optimal biogas production. The mesophilic digestion tests were performed with five mixing ratios of CW, VW, FW with CM and five feedstock to inoculum (F/I) ratios using batch anaerobic digesters. Co-digestion of CW, VW, FW with CM was carried out at F/I ratios of 1.0, 2.0, 3.0, 4.0, and 5.0. The results showed that the F/I ratio significantly affected the biogas production rate. Increasing the CW, VW, FW in the CM resulted in an increased methane yield by decreasing the F/I ratios in the reactors from 5.0 to 1.0. The highest biogas yields of 591.3, 432.9, and 450.6 L/kg VS_feed were obtained with CW/CM (50:50), VW/CM (25:75), and FW/CM (25:75) ratios, respectively. At five F/Is tested, after 45 days of AD, the total biogas yields were determined to be 629.74, 552.64, 501.87, 464.66, and 396.04 L and 496.93, 460.02, 420.5, 398.14, and 336.20 L, and 455.03, 382.81, 349.78, 340.95, and 298.53 L, respectively. However, the highest average CH₄ contents obtained at an F/I of 1.0 were 62.14%, 60.72%, and 61.08% that are 5.87%, 9.47%, and 10.17% higher than those obtained at F/I ratio of 5.0 for CW/CM (50:50), VW/CM (25:75), and FW/CM (25:75), respectively.     

Quality of tube well water intended for irrigation and human consumption with special emphasis on arsenic contamination at the area of Punjab,Pakistan

In the present study, the tube well water quality and the associated health risks, emphasizing on arsenic contamination, were investigated in rural and urban samples from Tehsil Mailsi located in Punjab, Pakistan. Arsenic concentrations (μg/L) were ranged from 12 to 448.5 and which exceeded the WHO recommended limit (10 μg/L) in all cases. The calculated average daily dose (3.3 × 10^?0.4 to 1.2 × 10^?0.2 mg/kg day) and hazard quotient (1.1–40) reflected the potential health risk to local population due to tube well water consumption as drinking purpose. Sodium percent (Na%), sodium absorption ratio, residual sodium carbonate, Kelly’s index and magnesium absorption ratio were also determined to assess the suitability of tube well water for irrigation purpose. The resulting piper plot revealed the Na–Ca–HCO₃ type water chemistry of the area and generally alkaline environment. The spatial distribution of arsenic in the tube well waters pinpoints the significant contribution of anthropogenic activities to arsenic pollution. Nevertheless, different statistical tools, including principal component analysis, hierarchical cluster analysis and correlation matrices, revealed the contribution of both natural and anthropogenic activities and alkaline type of aquifers toward the high level of arsenic contamination.     

Growth-corruption-health triaca and environmental degradation: empirical evidence from Indonesia,Malaysia, and Thailand

Environmental Science and Pollution Research - This study examines the impact of economic growth, corruption, health, and poverty on environmental degradation for three countries from ASEAN, namely...     

Wheat productivity responses in the rice-based system under different no-till techniques and nitrogen sources

Environmental Science and Pollution Research - No-till wheat is gaining popularity in rice-based cropping system as it provides a better chance for timely planting of wheat, management of crop...     

Recent progress in bioethanol production from lignocellulosic materials: A review

Natural energy sources like petrol and diesel are going to be diminished in the coming future which will lead to increase in the prices and demands of fossil fuels. Therefore, it is important to find a sustainable alternate of fossil fuels. Bioethanol is one of the alternatives, which is produced from different feedstocks including sugar-based, starch-based and lignocellulose-based materials through fermentation. Since sugar-based (sugar cane and sugar beet) and starch-based (corn) materials are sources of staple food, therefore, research on lignocellulosic materials for bioethanol production is a subject of recent studies. Ethanol production from lignocellulosic materials involves different steps, such as pretreatment, hydrolysis, followed by fermentation process and finally ethanol purification. In this review, we have summarized the recent progresses in bioethanol production and processing from lignocellulosic materials.     

Ethanol production from alkali-pretreated oil palm empty fruit bunch by simultaneous saccharification and fermentation with mucor indicus

Oil palm empty fruit bunch (OPEFB) is a potential raw material for production of lignocellulosic bioethanol. The OPEFB was pretreated with 8% sodium hydroxide (NaOH) solution at 100°C for 10 to 90 min. Enzymatic digestion was carried out using cellulase and β-glucosidase at 45°C for 24 h. It was then inoculated with Mucor indicus spores suspension and fermented under anaerobic conditions at 37°C for 96 h. Sodium hydroxide pretreatment effectively removed 51–57% of lignin in the OPEFB and also its hemicellulose (40–84%). The highest glucan digestibility (0.75 g/g theoretical glucose) was achieved in 40-min NaOH pretreatment. Fermentation by M. indicus resulted in 68.4% of the theoretical ethanol yield, while glycerol (16.2–83.2 mg/g), succinic acid (0–0.4 mg/g), and acetic acid (0–0.9 mg/g) were its by-products. According to these results, 11.75 million tons of dry OPEFB in Indonesia can be converted into 1.5 billion liters of ethanol per year.     

Biodiesel synthesis and characterization using welted thistle plant (Carduus acanthoides) as source of new non-edible seed oil

In this work we applied base catalyzed transesterification to convert non-edible welted thistle oil (Carduus acanthoides) as new non-edible feedstock into biodiesel (Fatty acid methyl esters). The highest biodiesel yield of 88% was obtained using optimized reaction conditions of 70°C and 5:1 molar ratio (methanol:oil). The synthesized esters were characterize and confirmed by the application of NMR and FT-IR techniques. Gas chromatography and mass spectroscopy identified different fatty acids as palmatic acid (C16:0), oleic acid (C18:1), linoleic acid (18:2), arachidic acid (C20:0), eicosanic acid (C20:1), and erucic acid (C22:1) in the oil of welted thistle. Six corresponding methyl esters reported in welted thistle oil biodiesel includes 9-hexadecenoic acid, hexadecanoic acid, 9-octadecadienoic acid, 11-eicosanoic acid, eicosanoic acid and 13-docosenoicacid. Fuel properties, such as density @40°C Kg/L (0.8470), kinematic viscosity @ 40°C c St (4.37), flash point (95°C), cloud point (+4°C), pour point (?5°C), and sulfur contents (0.0112% wt) of the biodiesel produced were compatible with American Society for Testing and Materials D 6751 specifications.     

Performance of oil palm kernel shell gasification using a medium-scale downdraft gasifier

This article focused on the performance of oil palm kernel shell (PKS) gasification using a medium-scale downdraft gasifier with a feedstock capacity of 500 kg at a temperature range of 399–700°C and at a feed rate of 177 kg/h. This article is important for evaluating the reliability of PKS gasification for commercial power generation activities from biomass. The process performance was evaluated based on the syngas calorific value (CV), syngas flow rate, and its cold gas efficiency (CGE). The syngas flow rates and CVs were measured using a gas flow meter and a gas analyzer in real time. The data obtained were then analyzed to evaluate the performance of the process. The results showed that the CGE of the process was moderately high (51%) at 681°C, with a high syngas CV (4.45–4.89 MJ/Nm³) which was ideal for gas engine applications. The PKS gasification performance increased when the reactor temperature increased. Projections were made for the CGE and the syngas CV for the PKS gasification with increased reactor temperatures and it was found that these values could be increased up to 80% and 5.2 MJ/Nm^3, respectively at a reactor temperature of 900°C. In addition, the estimated power that could be generated was about 600 kW_e at a maximum operation of 500 kg/h of feed rate. Based on the analysis, a medium-scale PKS gasification is observed to be a promising process for power generation from biomass due to the favorable performance of the process.