Levels of PCDD/PCDFs and PCBs in edible marine species and human intake: a literature review

Polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and biphenyls (PCBs) are lipophilic organic compounds whose origin comes from many different sources. PCDD/Fs and PCBs are ubiquitous and persistent environmental pollutants with a well known potential toxicity, which were included at the 1998 UN-EC POP protocol. Although human exposure to PCDD/Fs and PCBs can occur by various routes, food is the primary source. A number of studies have shown that the major food sources of these organic pollutants are fat-containing animal products, including fish and other seafood. Because of the frequent health recommendations concerning fish consumption, to determine the contribution to the dietary intake of chemical contaminants such as PCDD/Fs and PCBs through fish and other seafood consumption is an issue of special interest. This paper reviews the state of the science regarding recent literature on PCDD/F and PCB levels in marine species and human intake through fish and seafood consumption. The concentrations of these pollutants depend basically on the environment in which the respective species are caught. It is concluded that some groups of population frequently consuming high quantities of certain species could be significantly increasing health risks due to PCDD/F and PCB exposure.     

Perfluorinated chemicals in blood of residents in Catalonia (Spain) in relation to age and gender: a pilot study

Fluorinated organic compounds (FOCs) are a group of chemicals widely used as surfactants, lubricants, polymers, and fire-fighting foams. Recent studies have shown the ubiquitous distribution of FOCs in the environment, wildlife, and humans. We here report the results of a pilot study conducted to provide preliminary data on the levels of 13 FOCs in the blood of 48 residents in Catalonia, Spain, in relation to gender and age (25+/-5 and 55+/-5 years). The highest mean concentration was obtained for perfluorooctane sulfonate (PFOS, 7.64 ng/ml), followed by perfluorohexane sulfonate (PFHxS, 3.56 ng/ml) and perfluorooctanoic acid (PFOA, 1.80 ng/ml). Four other FOCs showed mean levels between 0.30 and 0.44 ng/ml, whereas those of the remaining 6 compounds were below the detection limit. Regarding gender, the blood levels of PFHxS and PFOA were significantly higher (p<0.05) in men than in women, while differences according to age were only noted for PFHxS (p<0.05) and perfluorooctane sulfonamide (PFOSA) (p<0.001), for which the levels were higher in the younger (25+/-5 years) group of subjects. A significant correlation between PFOS levels and those of the remaining detected FOCs (except PFDA) was found. In general terms, the current FOC concentrations were lower than those found in recent studies concerning levels of these chemicals in human blood and serum of subjects from different countries.     

Application of ICP-QMS for the determination of plutonium in environmental samples for safeguards purposes

Aiming to determine the plutonium amount as well as its isotopic composition, in particular, in swipe samples for safeguards purposes, an analytical method was developed with a plutonium separation step based on extraction chromatography using 2 cm TEVA columns and detection with quadrupole ICP-MS applying an ultra-sonic nebulizer coupled with membrane desolvation system. The method was successfully applied to New Brunswick plutonium certified reference materials as well as to Lawrence Livermore National Laboratory round robin samples, based on the round robin samples provided by the Institute for Reference Materials and Measurements (Belgium), as part of the Regular European Interlaboratory Measurement Evaluation Programme (REIMEP), campaign 16 (isotopic abundances of plutonium in plutonium nitrate samples), with a total plutonium amount between 1 and 0.25 ng per sample. After the introduction of an additional separation step, it was also possible to carry out precise and accurate total plutonium, (240)Pu/(239)Pu, (241)Pu/(239)Pu and (242)Pu/(239)Pu atom ratios determination in sediment sample showing its applicability to environmental samples in general, reaching a detection limit equivalent to 5 mBq(239)Pu kg(-1).     

A phenomenological approach shows a high coherence of warming patterns in dimictic aquatic systems across latitude

To predict the coherence in local responses to large-scale climatic forcing among aquatic systems, we developed a generalized approach to compare long-term data of dimictic water bodies based on phenomenologically defined hydrographic events. These climate-sensitive phases (inverse stratification, spring overturn, early thermal stratification, summer stagnation) were classified in a dual code (cold/warm) based on threshold temperatures. Accounting for a latitudinal gradient in seasonal timing of phases derived from gradients in cumulative irradiation (2.2?days per degree latitude), we found a high spatial and temporal coherence in warm–cold patterns for six lakes (84?%) and the Baltic Sea (78?%), even when using the same thresholds for all sites. Similarity to CW-codes for the North Sea still was up to 72?%. The approach allows prediction of phase-specific warming trends and resulting instantaneous or time-delayed ecological responses. Exemplarily, we show that warming during early thermal stratification controls food-web-mediated effects on key species during summer.     

Analysis of two schemes using micro hydroelectric power (MHPs) in the Amazon with environmental sustainability and energy and economic feasibility

A major problem for sustainable development in the Amazon is the difficulty of supplying electric power to isolated communities, which represent a considerable share of the population. This problem has been a major obstacle to productive activities (especially extractive and agricultural) in such communities, thus significantly contributing to rural drift and creating social problems in larger cities. In that case, one way to supply electric power would be to use the huge network of small rivers in the region by implementing Micro Hydroelectric Power Plants (MHPs). However, this type of hydropower project requires a set of technical assessments in order to obtain better value for its cost-effectiveness from the perspective of sustainable development. Thus, based on a survey of energy demand and the local hydrological and topographical characteristics, two possible MHP designs for the hydrological site under analysis were suggested. Assessments of hydropower, economic and environmental aspects were developed. MHP designs were compared with the diesel generator design of the community under focus. Comparison showed that the MHP designs are feasible in terms of energy to meet local demand; economically, they are more feasible than the diesel generator and are environmentally sustainable, mainly because such designs involve low-head, run-of-river MHPs and the flooded areas were simulated and are not larger than 0.02 km². Therefore, the information provided by these assessments constitutes important data, serving as subsidies for MHP implementation projects, which shall contribute to sustainable development in the region.     

Reduction in toxicity and generation of slag in secondary lead process

This paper focuses on the improvement of a secondary lead recycling processing plant, giving special attention to the generation of lead slag. The study was conducted using two different industrial rotary furnaces that together produce three different slag types, which depend on charge composition and lead-containing raw material obtained from a lead-acid battery recycling process. First, characterization of three slag types from different batches was performed, and such characterization included chemical, mineralogical, and structural analyses. By analyzing these data and the operational conditions of the process, it was possible to identify certain deficiencies in the recycling process and implement modifications in order to improve it. A reduction of up to 25% in the quantity of slag generated could be achieved with certain charges. In addition to this process improvement, it was possible to reduce the toxicity of the slag produced when processing a charge containing the same proportion of paste and grid as the lead-acid battery. This improvement lessens the overall environmental impact of the process. By applying this methodology, it was possible to determine some principles of cleaner production in the lead recycling process. So, waste generation could be reduced via improvements in the process and slag characteristics were modified to decrease its toxicity (as determined by lead content in leaching tests).     

Environmental and social determinants of anuran lekking behavior: intraspecific variation in populations at thermal extremes

Environmental and social factors are critical to determine the timing and duration of lekking behavior since they provide species with signs to maximize benefits over costs in sexual displays. However, these factors have rarely been studied under different environmental conditions, and thus, it remains unclear whether exogenous factors affecting group displays show a general species-specific pattern or whether they are population-specific. Using audio-trapping techniques, we compared factors influencing the daily occurrence and duration of lekking behavior in two populations of Hyla molleri and two populations of Hyla meridionalis located at the thermal extremes (coldest vs. hottest) of their Iberian distribution range. From 12,240 hourly recordings over one season, multimodel inference revealed that the major determinants of chorus occurrence were similar between populations and species (i.e., chorus size the previous day, daytime air temperature, relative humidity, and barometric pressure), and accounted for 51–79 % of its deviance. In contrast, the major determinants of chorus duration differed between populations and species (i.e., chorus size, number of day, and air temperature and relative humidity at the onset of the chorus), and accounted for 38–69 % of its variance. Our findings suggest that the decision making related to lek attendance is environment-dependent, takes place at time between lekking events, and is associated with exogenous factors that may be both stable across species ranges and population-specific when populations are under different climatic conditions. This intraspecific variation might be underlain by plasticity mechanisms providing tree frogs with means to cope with changing environments. Moreover, social facilitation related to male-male acoustic competition seems to play a relevant role on the daily time invested by males in lek attendance.     

Effect of feeding strategy and COD/sulfate ratio on the removal of sulfate in an AnSBBR with recirculation of the liquid phase

The objective of this work was to analyze the effect of the interaction between feeding strategy and COD/sulfate ratio on the removal efficiency of sulfate and organic matter from a synthetic wastewater. An anaerobic sequencing batch reactor with recirculation of the liquid phase and containing immobilized biomass on polyurethane foam (AnSBBR) was used. The AnSBBR with a total volume of 3.7 L, treated 2.0 L synthetic wastewater in 8-h cycles at 30 ± 1 °C and was inoculated with anaerobic biomass from a UASB. Two feeding strategies were assessed: (a) batch and (b) batch followed by fed-batch. In strategy (a) the reactor was fed in 10 min with 2 L wastewater containing sulfate and carbon sources. In strategy (b) 1.2 L wastewater (containing only the sulfate source) was fed during the first 10 min of the cycle and the remaining 0.8 L (containing only the carbon source) in 240 min. The COD/sulfate ratios assessed were 1 and 3. Based on these values and on the concentrations of organic matter (0.5–11.25 gCOD/L) and sulfate (0.5 and 2.5 gSO₄^2?/L), the sulfate and organic matter loading rates applied equaled 1.5 and 4.5 gSO₄^2?/L d for sulfate and 1.5, 4.5 and 13.5 gCOD/L d for organic matter. After stabilization of the system time profiles were run of monitored parameters (COD, sulfate, sulfide and sulfite). In general, the reactor showed to be robust for use in the anaerobic treatment of wastewaters containing sulfate. Gradual feeding (strategy b) of the carbon source favored sulfate reduction, resulting in sulfate removal efficiencies of 84–98% and organic matter removal efficiencies of 48–95%. The best results were observed under COD/sulfate ratio equal to 1 (loading rates of 1.5 and 4.5 gSO₄^2?/L d for sulfate, and 1.5 and 4.5 gCOD/L d for organic matter). When COD/sulfate ratio was 3 (loading rates of 1.5 and 4.5 gSO₄^2?/L d for sulfate, and 4.5 and 13.5 gCOD/L d for organic matter) the effect of feed mode became less significant. These results show that the strategy batch followed by fed-batch is more advantageous for COD/sulfate ratios near the stoichiometric value (0.67) and higher organic matter and sulfate concentrations.     

Remediation procedure used for contaminated soil and underground water: A case study from the chemical industry

This is a case study of contamination by a non-aqueous phase liquid (NAPL) that leaked from a chemical plant. The remediation procedure adopted for the initial phase of the plume migration was a plastic diaphragm wall coupled with a series of water extraction wells designed to avoid environmental impact on the surrounding ecosystems. Monitoring has shown that the containment is successful, and additional measures that contribute to accelerating remediation have been adopted. The authors wished to investigate how remediation might be further enhanced. The use of in situ aeration coupled with a system of soil vapor extraction (AS/SVE) has been chosen, since the remediation of sites with characteristics similar to those in this study, if based exclusively on dissolved-phase control, would take several decades to be completed. The transport of contaminant plumes has been simulated by using an analytical model to evaluate the effectiveness of the natural attenuation of the contaminant. The results of the simulation have confirmed the limited effectiveness of the natural attenuation of the contaminant, as well as the effective increase of remediation that would occur if the AS/SVE system is applied. A sensitivity analysis that included several combinations of increments of parameters that correspond to the decay rate of the source and the dissolved plume has simulated what might happen if the AS/SVE system is implemented.