Determination of BTEX by GC–MS in Air of Offset Printing Plants: Comparison between Conventional and Ecological Inks

The use of inks containing organic solvents by the offset printing process implies in the release of volatile organic compounds to the work environment. Many of these compounds such as benzene, toluene, ethylbenzene, and the xylene isomers (well known by the acronym BTEX) are extremely toxic. In this study, the BTEX concentrations were determined in two different printing plants that use distinct types of inks: the conventional and the so-called ecological, which is manufactured based on vegetal oil. Concentration ranges were 43–84, 15–3,480, 2–133, 5–459, and 2–236 μg m^?3 for benzene, toluene, ethylbenzene, m?+?p-xylene, and o-xylene, respectively, for the conventional printing plant. At the ecological printing plant, concentration ranges were below limit of detection (<LD)-31, <LD-618, <LD-1,690, <LD-10,500, <LD-3,360 μg m^?3 for benzene, toluene, ethylbenzene, m?+?p-xylene, and o-xylene, respectively. BTEX concentrations are lower at the ecological printing environment than in the conventional, where mineral oil-based inks are used. However, the worker who cleans the printing matrices is exposed to high concentrations of ethylbenzene and xylenes, due probably to the cleaning product’s composition (containing high amounts of BTEX). Although the BTEX concentrations found in both printing work environments were below the limits considered by the Brazilian Law for Activities and Unhealthy Operations (NR-15), the exposure to such vapors characterizes risk to the workers’ health for some of the evaluated samples, mainly the personal ones.     

Optimal planning for the sustainable utilization of municipal solid waste

The increasing generation of municipal solid waste (MSW) is a major problem particularly for large urban areas with insufficient landfill capacities and inefficient waste management systems. Several options associated to the supply chain for implementing a MSW management system are available, however to determine the optimal solution several technical, economic, environmental and social aspects must be considered. Therefore, this paper proposes a mathematical programming model for the optimal planning of the supply chain associated to the MSW management system to maximize the economic benefit while accounting for technical and environmental issues. The optimization model simultaneously selects the processing technologies and their location, the distribution of wastes from cities as well as the distribution of products to markets. The problem was formulated as a multi-objective mixed-integer linear programing problem to maximize the profit of the supply chain and the amount of recycled wastes, where the results are showed through Pareto curves that tradeoff economic and environmental aspects. The proposed approach is applied to a case study for the west-central part of Mexico to consider the integration of MSW from several cities to yield useful products. The results show that an integrated utilization of MSW can provide economic, environmental and social benefits.     

Feasibility of storing CO2 in the Utsira formation as part of a long term Dutch CCS strategy: An evaluation based on a GIS/MARKAL toolbox

This study provides insight into the feasibility of a CO₂ trunkline from the Netherlands to the Utsira formation in the Norwegian part of the North Sea, which is a large geological storage reservoir for CO₂. The feasibility is investigated in competition with CO₂ storage in onshore and near-offshore sinks in the Netherlands. Least-cost modelling with a MARKAL model in combination with ArcGIS was used to assess the cost-effectiveness of the trunkline as part of a Dutch greenhouse gas emission reduction strategy for the Dutch electricity sector and CO₂ intensive industry. The results show that under the condition that a CO₂ permit price increases from €25 per tCO₂ in 2010 to €60 per tCO₂ in 2030, and remains at this level up to 2050, CO₂ emissions in the Netherlands could reduce with 67% in 2050 compared to 1990, and investment in the Utsira trunkline may be cost-effective from 2020–2030 provided that Belgian and German CO₂ is transported and stored via the Netherlands as well. In this case, by 2050 more than 2.1 GtCO₂ would have been transported from the Netherlands to the Utsira formation. However, if the Utsira trunkline is not used for transportation of CO₂ from Belgium and Germany, it may become cost-effective 10 years later, and less than 1.3 GtCO₂ from the Netherlands would have been stored in the Utsira formation by 2050. On the short term, CO₂ storage in Dutch fields appears more cost-effective than in the Utsira formation, but as yet there are major uncertainties related to the timing and effective exploitation of the Dutch offshore storage opportunities.     

Natural product biomarkers as indicators of sources and transport of sedimentary organic matter in a subtropical river

The sources and transformations of sedimentary organic matter along the Harney River, a representative subtropical river of the Florida Everglades, were assessed using a natural product biomarker approach. Sediment samples were collected from the headwaters to the Continental Shelf, with characteristic vegetation dominated by freshwater marsh species, mangrove (middle to lower estuary), and seagrass as the marine end-member. A peat sample was collected inland. All sample extracts were analyzed by GC–MS as underivatized and as silylated compounds. With these total extract analyses, major compound classes can be defined: n-alkanols, n-alkanoic acids, methyl alkanoates, methyl - and ω-hydroxyalkanoates, triterpenoids, phytosterols and saccharides, with traces of hydrocarbons. In general, the peat sample extract has a different overall composition compared to the sediment extracts. The major differences include distinct carbon number maxima for the lipid series (e.g., C_max = 28 for n-alkanols) probably from sawgrass and periphyton biomass, and predominance of phytosterols (sitosterol and stigmasterol) from higher plant detritus. In contrast, river sediment extracts contain biomarkers predominantly from mangrove-derived organic matter, such as the triterpenoids taraxerol and myricadiol. Significant amounts of saccharides and ω-hydroxyalkanoates are also found. Generally, compound concentrations decrease downstream due to dilution, and alteration of organic compounds from plant waxes and coastal vegetation is obvious in both peat and sediment samples. This is confirmed by the significant low abundance of n-alkanes and n-alkenoic acids due to biodegradation, oxidation of -tocopherol to homophytanic acid γ-lactone, and presence of traces of dihydrolacunosic acid, a photochemical alteration product of taraxerol.     

Determination of PM2.5 sources using time-resolved integrated source and receptor models

Multivariate statistical techniques are applied to particulate matter (PM) and meteorological data to identify the sources responsible for evening PM spikes at Sunland Park, NM (USA). The statistical techniques applied are principal components analysis (PCA), redundancy analysis (RDA), and absolute principal components scores analysis (APCSA), and the data evaluated are 3-h average (6–9 p.m.) PM_2.5 mass and chemical composition and 1-h average PM_2.5 and PM₁₀ mass and environmental data collected in the winter of 2002. Although the interpretation of the data was complicated by the presence of sources which are likely changing in time (e.g. brick kilns), the multivariate analyses indicate that the evening high PM_2.5 is associated with burning-activities occurring to the south of Sunland Park, and these emissions are characterized by elevated Sb, Cl⁻, and elemental carbon; 68% of the PM_2.5 mass can be attributed to this source. The PM₁₀ evening peaks, on the other hand, are mainly caused by resuspended dust generated by vehicular movements south of the site and transported by the local terrain-induced drainage flow.     

A new bacterial strain mediating As oxidation in the Fe-rich biofilm naturally growing in a groundwater Fe treatment pilot unit

A bacterial strain B2 that oxidizes arsenite into arsenate was isolated from the biofilm growing in a biological groundwater treatment process used for Fe removal. This strain is phylogenetically and morphologically different from the genus Leptothrix commonly encountered in biological iron oxidation processes. T-RFLP fingerprint of the biofilm revealed that this isolated strain B2 corresponds to the major population of the bacterial community in the biofilm. Therefore, it is probably one of the major contributors to arsenic removal in the treatment process.     

Mercury distribution in abiotic and biological compartments within several estuarine systems from Argentina: 1980-2005 period

Total mercury contents from both abiotic and biological compartments within several estuaries from Argentina have been studied since the 1980s. The assessment of mercury occurrence in surface sediments, suspended particulate matter and crab and fish species from Mar Chiquita coastal lagoon, Bahía Blanca estuary and Samborombón Bay (in La Plata river estuary) are included in the present study. All samples were analyzed through Cold Vapor-Atomic Absorption Spectroscopy, following internationally standardized methods. In all cases analytical quality was checked against international reference materials. During the 1980s, Hg contents in sediments and SPM, as well as in edible fish species from Bahía Blanca estuary were significantly higher (p<0.01) than those of the 1990s and 2000s, and the large industrial nucleus located in the northern margin of this estuary was elsewhere identified as the main source of this metal. A permanent monitoring program carried out in 1986 and that is being implemented up to the present has demonstrated that Hg concentration values have significantly decreased (p<0.01) compared to the values of the 1980s. Both, Mar Chiquita coastal lagoon and Samborombón Bay have intermediate mercury levels in their biological compartments. In both cases, the possible occurrence of remote sources of this metal was considered. Even though, Hg values as determined in sediments and suspended particulate matter from Samborombón Bay were the highest ones for the whole analyzed period. Both mercury bioaccumulation and biomagnification processes were evaluated in the studied estuaries, as well as the potential qualification of estuarine foodstuffs for human consumption.     

Chelate-induced phytoextraction of metal polluted soils with Brachiaria decumbens

Chelate-induced phytoextraction with high biomass plant species has been proposed for the clean-up of heavy metal polluted soils. In the current work, the effect of the application of two different chelating agents, i.e. EDTA and EDDS, on the metal phytoextraction capacity of Brachiaria decumbens was studied. Although EDTA was, in general, more effective in soil metal solubilization, EDDS, a chelate less harmful to the environment, was more efficient inducing metal accumulation in B. decumbens shoots than EDTA. Indeed, in a moderately heavy metal polluted soil, EDDS caused a 2.54, 2.74 and 4.30-fold increase in Cd, Zn, and Pb shoot metal concentration, respectively, as compared to control plants. In this same soil, EDTA caused a 1.77, 1.11 and 1.87-fold increase in Cd, Zn, and Pb shoot metal concentration, respectively, as compared to control plants. EDDS was also more effective than EDTA in stimulating the translocation of metals from roots to shoots. B. decumbens plants were able to grow in the metal polluted soils showing no visible symptoms of phytotoxicity, which suggests their metal tolerance. Finally, B. decumbens, a fast-growing, high biomass, aluminum tolerant plant species, that has a well-established agronomic system, fulfills most of the requirements for chemically-induced phytoextraction.     

Electrochemical combustion of herbicide mecoprop in aqueous medium using a flow reactor with a boron-doped diamond anode

The anodic oxidation of 1.8l of solutions with mecoprop (2-(4-chloro-2-methylphenoxy)-propionic acid or MCPP) up to 0.64 g l(-1) in Na2SO4 as background electrolyte within the pH range 2.0-12.0 has been studied using a flow plant containing a one-compartment filter-press electrolytic reactor with a boron-doped diamond (BDD) anode and a stainless steel cathode, both of 20-cm2 area. Electrolyses carried out in batch under steady conditions and operating at constant current density between 50 and 150 mA cm(-2) always yield complete mineralization due to the great concentration of hydroxyl radical generated at the BDD anode. The degradation rate is practically independent of pH and Na2SO4 concentration, but it becomes faster with increasing MCPP concentration, current density, temperature and liquid flow rate. The effect of these parameters on current efficiency and energy cost has also been investigated. Generated weak oxidants such as H2O2 and peroxodisulfate ion have little influence on the mineralization process. The kinetics for the herbicide decay follows a pseudo first-order reaction with a higher rate constant when current density increases. Aromatic products such as 4-chloro-o-cresol, 2-methylhydroquinone and 2-methyl-p-benzoquinone, and generated carboxylic acids such as maleic, fumaric, lactic, pyruvic, tartronic, acetic and oxalic, have been identified as intermediates by chromatographic techniques. The initial chlorine is completely released in the form of chloride ion, which is slowly oxidized to Cl2 at the BDD anode. A reaction pathway for MCPP mineralization involving all products detected is proposed.