Nonthermal Plasma Chemical Processing of Bromomethane

ABSTRACT

Nonthermal plasma chemical decomposition of bromomethane (CH₃Br) was investigated with a coaxial type packed-bed plasma reactor. It has been demonstrated that plasma chemical processing is an effective approach to decompose CH₃Br in a wide concentration range. It has been shown that CH₃Br decomposition reactivity depends on reactor operating factors such as background gas, O₂ concentration, and humidification. Higher decomposition efficiencies can be obtained in dry N₂. However, organic byproducts such as BrCN are concurrently produced under deaerated conditions. Water suppresses CH₃Br decomposition and also affects the yields of CO_x (CO and CO₂) and organic byproducts due to the involvement of some active species generated from water. The presence of O₂ retards CH₃Br decomposition by quenching high-energy electrons, while it suppresses organic byproducts and improves CO_x yield. The reacted carbons in CH₃Br are recovered as CO_x almost quantitatively in air. Higher CO₂ selectivities cannot be achieved by increasing O₂ concentration. NO_x formation, which is accompanied by CH₃Br decomposition, can be effectively suppressed by decreasing O₂ concentration down to 2%. Furthermore, reaction mechanisms are discussed by comparing the reactivities of CH₃Br and its congeners.     

Distribution of Todarodes pacificus (Cephalopoda: Ommastrephidae) paralarvae near the Kuroshio off southern Kyushu, Japan

The distribution and abundance of Japanese common squid [Todarodes pacificus (Steenstrup, 1880)] paralarvae off southern Kyushu Island near the Kuroshio were examined in relation to water types in the region. Surveys were conducted in 1996 and 1997 using paired, 70 cm diameter Bongo nets. Temperature–salinity plots from 0, 50 and 100 m depths were used to assign sampling stations to three water types: inshore, mixing and Kuroshio. In total, 4103 T. pacificus paralarvae were collected at 59 of 72 stations. Catch densities at positive stations ranged between 8 and 4282 ind./50 m² sea surface area. Catches during both years were highest in mixing waters, followed by inshore and Kuroshio waters. Total catches were highest just north of the oceanographic front at the inshore edge of the Kuroshio and declined with increasing distance away from the front. Catches of paralarvae ≤1.0 mm mantle length also peaked near the front. In both years, ≥85% of all paralarvae and ≥69% of those ≤1.0 mm mantle length occurred less than 25 km from the front. We conclude that most spawning off southwest Kyushu occurs near the frontal zone, where Kuroshio and inshore waters meet. Received: 18 November 1998 / Accepted: 11 May 1999     

Biodegradation of Chitosan-Gellan and Poly(L-lysine)-Gellan Polyion Complex Fibers by Pure Cultures of Soil Filamentous Fungi

The degradation of two kinds of polyion complex (PIC) fibers, chitosan-gellan (CGF), and poly(L-lysine)-gellan (LGF) fibers, by seven species of soil filamentous fungi has been investigated. All of the pure-line soil filamentous fungi, Aspergillus oryzae, Penicillium caseicolum, P. citrinum, Mucor sp., Rhizopus sp., Curvularia sp., and Cladosporium sp. grew on the two fiber materials. Microscopic observation of the biodegradation processes revealed that P. caseicolum on the CGF and LGF grew, along with the accompanying collapse of the fiber matrices. In the biochemical oxygen-demand (BOD) test, the biodegradation of the LGF by P. caseicolum and Curvularia sp. exceeded 97% carbon dioxide generation and the biodegradation of the CGF by A. oryzae was 59%. These results might offer some clues to the applications of the PIC fibers as environmentally biodegradable materials.     

Biodegradation of aliphatic-aromatic copolyesters: evaluation of the final biodegradability and ecotoxicological impact of degradation intermediates.

The biological degradation behaviour of the aliphatic-aromatic copolyester Ecoflex was investigated with regard to the degree of degradation and the intermediates formed during the degradation process. The individual thermophilic strain Thermomonospora fusca, isolated from compost material, was used for the degradation experiments in a defined synthetic medium at 55 degrees C. After 22 days of degradation more than 99.9% of the polymer had depolymerized and with regard to the degradation of the diacid and diol components of Ecoflex only the monomers of the copolyesters (1,4-butanediol, terephthalate and adipate) could be detected by gas chromatography/mass spectroscopy (GC-MS) measurements in the medium. In interrupted degradation experiments predominantly the monoesters of adipic acid and terephthalic acid with 1,4-butanediol were observed in addition to the monomers. In toxicological tests with Daphnia magna and Photobacterium phosphoreum no significant toxicological effect was observed, neither for the monomeric intermediates nor for the oligomeric intermediates. From a risk assessment it can be concluded that there is no indication for an environmental risk when aliphatic-aromatic copolyesters of the Ecoflex-type are introduced into composting processes.     

The relative contribution of dinoflagellate photosynthesis and stored lipids to the survivorship of symbiotic larvae of the reef-building corals

The long-distance dispersal of larvae provides important linkages between populations of reef-building corals and is a critical part of coral biology. Some coral planulae have symbiotic dinoflagellates (Symbiodinium spp.) that probably provide energy in addition to the lipids provisioned within the egg. However, our understanding of the influence of symbionts on the energy metabolism and survivorship of planulae remains limited. This study examines the relative roles of symbiotic dinoflagellate photosynthesis and stored lipid content in the survivorship of the developing stages of the corals Pocillopora damicornis and Montipora digitata. We found that survivorship decreased under dark conditions (i.e. no photosynthetic activity) for P. damicornis and M. digitata at 31 and 22 days after release/spawning, respectively. The lipid content of P. damicornis and M. digitata planulae showed a significant decrease, at a higher rate, under dark conditions, when compared with light conditions. When converted to energy equivalents, the available energy provided by the depletion of lipids could account for 41.9 and 84.7% of larval metabolism for P. damicornis (by day 31) and 38.4 and 90.1% for M. digitata (by day 21) under light and dark conditions, respectively. This finding indicates that not all energy requirements of the larvae are met by lipids: energy is also sourced from the photosynthetic activities of the symbiotic dinoflagellates within these larvae, especially under light conditions. In addition, the amounts of three main lipid classes (wax esters, triglycerides, and phospholipids) decreased throughout the experiment in the planulae of both species, with the wax ester content decreasing more rapidly under dark conditions than under light conditions. The observations that the planulae of both species derive considerable amounts of energy from wax esters, and that symbiotic dinoflagellates enable larvae to use their stores at lower rates, suggested that symbiotic dinoflagellates have the potential to extend larval life under light conditions.     

Risk evaluation with waste scenario: lead emissions in solder waste treatment

In this work, an estimate of the elevation of airborne lead concentrations via the lead solder contained in domestic electricity installations and an investigation into the effects of human exposure were conducted using a simulation method. The elevation of airborne lead concentrations due to incineration was calculated to be 0.001 µg/m³ maximum. The simulation results of the calculations indicated that blood lead concentrations could reach as high as 10⁻⁵ µg/dl. These concentrations could primarily be attributed to the inhalation of airborne lead particles. In addition, we discuss the influences of lead solder disposal on the ecosystem via soil and water.     

Selection of product categories for a national eco-labelling scheme in developing countries: a case study of Vietnamese manufacturing sub-sectors

Although the selection of product categories is a deciding factor for the success of eco-labelling schemes, there are no consistent methods for determining selection factors and how to prioritise product categories for developing countries (DgCs). This paper attempts to identify appropriate factors for product category selection and formulate a prioritisation method applicable to DgCs. We first examined the selection factors currently utilised in schemes worldwide by conducting a questionnaire survey of representatives of foreign schemes. Selection factors were illustrated on a plot graph, which indicated the percentage of factors implemented in the schemes of DgCs and developed countries (DGs), and their plausibility assessed when utilised in the schemes of DgCs. In this way, we proposed three groups of factors: an exclusion factor, five core factors and seven operational factors. Then, under the conditions of DgCs, such as socioeconomic issues and availability of data, we used and modified some judging guidelines of the European Ecolabel (the EU Flower), e.g. determining the environmental impacts and potential of environmental improvements, in the scoring method to prioritise product categories by weighting factors. In light of our findings, we utilised the proposed factors and modified the scoring method to prioritise the screened primary list of product categories of Vietnamese manufacturing sub-sectors. By scoring factor-based questions and prioritising in three ways, i.e. following the scoring method of the EU Flower programme, totalling all values with equal weighting, and totalling all values but by doubling the weighting of core factors compared with operational factors, we observed that the weighted prioritisation differentiates priority product categories more clearly than the other methods. We propose the two highest potential candidates for eco-labelling in Vietnam, namely textile/garment and fishery products.     

Development of highly active coated monolith SCR catalyst with strong abrasion resistance for low-temperature application

Monolith SCR catalysts coated with V₂O₅-WO₃/TiO₂ were prepared by varying binder and coating thickness. Comparing with a monolith extruded with 100% V₂O₅-WO₃/TiO₂ powder, a coated monolith with a catalyst-coating layer of 260 μm in thickness exhibited the similar initial NO_x reduction activity at 250°C. After 4 h abrasion (attrition) in an air stream containing 300 g·m⁻³ fine sands (50–100 μm) at a superficial gas velocity of 10 m·s⁻¹, the catalyst still has the activity as a 100% molded monolith does in a 24-h activity test and it retains about 92% of its initial activity at 250°C. Estimation of the equivalent durable hours at a fly ash concentration of 1.0 g·m⁻³ in flue gas and a gas velocity of 5 m·s⁻¹ demonstrated that this coated monolith catalyst is capable of resisting abrasion for 13 months without losing more than 8% of its initial activity. The result suggests the great potential of the coated monolith for application to de-NO_x of flue gases with low fly ash concentrations from, such as glass and ceramics manufacturing processes.     

The socially optimal recycling rate: Evidence from Japan

This paper estimates the average social cost of municipal waste management as a function of the recycling rate. Social costs include all municipal costs and revenues, costs to recycling households to prepare materials estimated with an original method, external disposal costs, and external recycling benefits. Results suggest average social costs are minimized with recycling rates well below observed and mandated levels in Japan. Cost-minimizing municipalities are estimated to recycle less than the optimal rate. These results are robust to changes in the components of social costs, indicating that Japan and perhaps other developed countries may be setting inefficiently high recycling goals.