Use of organic coagulant/flocculant for treatment of effluents generated in intensive rearing of swine

Separation of water for reuse is essential in an effluent treatment system, especially in activities with high water consumption, such as a pig production system. The objective of this work was to evaluate the efficiency of Tanfloc SG^® coagulant tannin/organic flocculant used to treat effluent generated during the intensive rearing of swine. For the evaluation, laboratory and in situ tests (field test) were performed. The laboratory tests were performed to define the concentration (1 and 16%), dosage (0, 0.1, 0.2, 0.3, 0.4, 0.5, 1.0, 2.0, 4.0, 8.0, and 16.0 milliliters of the solution), and time (24, 48, 72, and 96 hours) of coagulation/flocculation treatment of the solid portion of the effluent. The parameters pH, turbidity, oxidation reduction potential, dissolved oxygen, and electroconductivity (in microsiemens per centimeter) were evaluated using a multiparameter probe and the parameters ammonia (NH₃), nitrate (NO₃), and nitrite (NO₂) in the laboratory, in relation to the coagulation/flocculation time of the solid part of the effluent. The use of tannin as a coagulant/flocculant of plant origin in the treatment of swine effluents was effective in reducing turbidity and concentrations of ammonia, nitrite, and nitrate, and it allowed separation of the solid–liquid phase in approximately 68% as liquid phase.     

Preparation of jet engine range fuel from biomass pyrolysis oil through hydrogenation and its comparison with aviation kerosene

The Bio-oil was produced from the pyrolysis of agricultural wastes (Eucalyptus sawdust) and discarded soybean frying oil. The temperature of the pyrolysis system was initiated at 28°C and increased to 850°C. Atmospheric distillation of crude bio-oil was performed and a fraction at a temperature range 160–240°C (pyrolysis oil) was separated and subjected to GC-MS, ¹H-NMR, TGA and FTIR analysis to identify the different properties and compounds present in pyrolysis oil. It was noticed that there was an abundance of oxygen and nitrogen containing compounds as well as other reactive species in pyrolysis oil. To reduce the amount of these species, the pyrolysis oil was subjected to hydrogenation in the presence of NiMo as a catalyst. After hydrogenation, the atmospheric distillation of hydrogenated bio-oil was performed and another fraction at temperature range 160–240°C (hydrogenated bio-oil) was separated and analyzed by the same techniques. It was noticed that during hydrogenation, more than 60% oxygenated and other reactive species were converted into hydrocarbons. Hydrogenated bio-oil showed very similar physico-chemical properties such as distillation curve, density, viscosity, freezing point, flash point, the presence of hydrocarbons and enthalpy of combustion as aviation kerosene also known as QAV-1.     

Gastroenteric Viruses Detection in a Drinking Water Distribution-to-Consumption System in a Low-Income Community in Rio de Janeiro

Food and Environmental Virology - The availability of drinking water is one of the main determinants of quality of life, disease prevention and the promotion of health. Viruses are important agents...     

Hepatitis A Virus,Hepatitis E Virus,and Rotavirus in Foods of Animal Origin Traded at the Borders of Brazil,Argentina, and Uruguay

The aim of this study was to investigate hepatitis A virus (HAV), hepatitis E (HEV), and rotavirus (RV) in fresh and processed meat traded on the border of Brazil with Argentina and Uruguay. In total, 159 samples of raw and processed foods of animal origin were collected in Paso de los Libres, Argentina (n?=?53 raw meat, n?=?24 processed meat) and Rivera, Uruguay (n?=?55 raw meat, n?=?18 processed meat), or were seized by the Brazilian International Agricultural Surveillance System—VIGIAGRO (Brazil–Argentina border) (n?=?8 raw meat, n?=?1 bush meat). All samples were tested for the presence of HAV, HEV, and RV genomes. HAV genes were detected in 18.23% of samples and RV genes in 23.89%. No HEV-positive samples were detected. HAV was also detected in two of the VIGIAGRO samples. Processed meats from Argentina and Uruguay had a higher rate of HAV and RV than raw meat (P?>?0.05). The median HAV in the Argentinian and Uruguayan samples was 6.9?×?10⁴ and 3.5?×?10³ copies/g, respectively. The presence of RV viral genes in raw meats from Argentina was significant, and this was not observed in processed meats. The presence of HAV and RV genes in a significant portion of products from Argentina and Uruguay is a potential source of human infection. This also indicates precarious conditions of acquisition, processing, and manipulation, which could be improved by improved regulation of food across borders.     

Assessing biodiversity vulnerability to climate change: testing different methodologies for Portuguese herpetofauna

Assessing biodiversity vulnerability to future climate change is essential for developing robust adaptation strategies. A number of vulnerability assessment methodologies have been developed, from bioclimatic envelop models to more complex approaches that also consider biological traits and population status. However, the lack of comparative studies leaves the user to choose among the different methodologies without much guidance. This study applied three vulnerability assessment approaches to the Portuguese herpetofauna: (I) impact assessment approach based on bioclimatic models; (II) integrated vulnerability assessment approach, adding the evaluation of adaptive capacity to approach I; and (III) integrated vulnerability assessment and validation based on expert consultation. Results showed disagreement between the different approaches for 19 % of the species studied. Most differences were found between approach III and the two other approaches. All approaches showed advantages and limitations, the choice of a methodology being ultimately dependent on the study goals. Approach I has proven efficient to capture general vulnerability patterns. Approach II, although presenting results similar to approach I, allows for the identification of key factors affecting the species adaptive capacity and may be useful in tailoring adaptation measures. Approach III further allows us to identify knowledge gaps and to evaluate vulnerability when data availability or quality is reduced. Further, because this approach is based on an expert workshop, it has proven a perfect means to build on the vulnerability assessment results to identify indicator species and prioritize specific adaptation options.     

Considering connections between Hollywood and biodiversity conservation

Cinema offers a substantial opportunity to share messages with a wide audience. However, there is little research or evidence about the potential benefits and risks of cinema for conservation. Given their global reach, cinematic representations could be important in raising awareness of conservation issues and species of concern, as well as encouraging greater audience engagement due to their heightened emotional impact on viewers. Yet there are also risks associated with increased exposure, including heightened visitor pressure to environmentally sensitive areas or changes to consumer demand for endangered species. Conservationists can better understand and engage with the film industry by studying the impact of movies on audience awareness and behavior, identifying measurable impacts on conservation outcomes, and engaging directly with the movie industry, for example, in an advisory capacity. This improved understanding and engagement can harness the industry's potential to enhance the positive impacts of movies featuring species, sites, and issues of conservation concern and to mitigate any negative effects. A robust evidence base for evaluating and planning these engagements, and for informing related policy and management decisions, needs to be built.     

Use of sugarcane filter cake and nitrogen,phosphorus and potassium fertilization in the process of bioremediation of soil contaminated with diesel

This study evaluated the use of sugarcane filter cake and nitrogen, phosphorus and potassium (NPK) fertilization in the bioremediation of a soil contaminated with diesel fuel using a completely randomized design. Five treatments (uncontaminated soil, T1; soil contaminated with diesel, T2; soil contaminated with diesel and treated with 15 % (wt) filter cake, T3; soil contaminated with diesel and treated with NPK fertilizer, T4; and soil contaminated with diesel and treated with 15 % (wt) filter cake and NPK fertilizer, T5) and four evaluation periods (1, 60, 120, and 180 days after the beginning of the experiment) were used according to a 4?×?5 factorial design to analyze CO₂ release. The variables total organic carbon (TOC) and total petroleum hydrocarbons (TPH) remaining in the soil were analyzed using a 5?×?2 factorial design, with the same treatments described above and two evaluation periods (1 and 180 days after the beginning of the experiment). In T3 and T5, CO₂ release was significantly higher, compared with the other treatments. Significant TPH removal was observed on day 180, when percent removal values were 61.9, 70.1, 68.2, and 75.9 in treatments T2, T3, T4, and T5, respectively, compared with the initial value (T1).     

The influence of axle position and the use of accessories on the activity of upper limb muscles during manual wheelchair propulsion

Introduction. Wheelchair configuration is an important factor influencing the ergonomics of the user–device interface and, from a biomechanical point of view, small changes in chair setup may have a positive influence on the demand on the upper limbs during manual propulsion. This study aimed to investigate the influence of the position of the rear wheels’ axle and the use of accessories on the activity of upper limb muscles during manual wheelchair propulsion. Methods. Electromyography signals of the biceps, triceps, anterior deltoids and pectoralis major were collected for 11 able-bodied subjects in a wheelchair propulsion protocol with four different wheelchair configurations (differing in axle position and the use of accessories) on a straightforward sprint and a slalom course. Results. With accessories, moving the axle forward led to a decrease in the activity of all muscles in both the straightforward sprint (significant differences in triceps, anterior deltoids and biceps) and the slalom course (significant difference in anterior deltoids and biceps). However, when propelling the chair without accessories, no difference was found related to axle position. Conclusion. Changes in wheelchair configuration can influence the ergonomics of manual wheelchair propulsion. Reducing the biomechanical loads may benefit users’ mobility, independence and social participation.     

Composition analysis of dental solid waste in Brazil

When developing proper waste management strategies, it is essential to characterize the volume and composition of solid waste. The aim of this work was to evaluate the composition of dental waste produced by three dental health services in Belo Horizonte, Minas Gerais State, Brazil. Two universities, one public and one private, and one public dental health service were selected. Waste collection took place from March to November 2007. During this period, three samples were collected from each dental health service. The total amount of dental waste produced in one day of dental work was manually separated into three categories: infectious and potentially infectious waste, accounting for 24.3% of the total waste; non-infectious waste, accounting for 48.1%; and domestic-type waste, accounting for 27.6% (percentages are for mean weights of solid waste). Our results showed that most of the waste considered as biomedical may be misclassified, consequently making the infectious waste amount appear much larger. In addition, our results suggest that the best waste minimization method is recycling, and they help to define an appropriate waste management system in all three of the dental health services involved in this study.