A numerical investigation of three-dimensional falling liquid films

Environmental Fluid Mechanics - In this article, we present a full three-dimensional numerical study of thin liquid films falling on a vertical surface, by solving the full three-dimensional...     

Role of casting and curing conditions on the strength and drying shrinkage of greener concrete

The shrinkage of cement-based materials is a critical dimensional property that needs proper attention as it can influence the corresponding characteristics especially when the preparation of such cement-based material is done in hot weather. Studies have shown that the casting or curing conditions influence the performance of concrete. However, there is limited understanding of the combined role of casting temperature and curing conditions, especially for concrete made with unconventional binders. In this study, five supplementary cementitious materials (SCMs) were utilized as the substitute of the ordinary Portland cement (OPC) at different ratios to produce greener concrete and improve its characteristics and sustainability. The influence of four casting temperatures (i.e., 25 °C, 32 °C, 38 °C, and 45 °C) and two curing regimes (i.e., covering of samples using wet burlap and applying curing compound on the surface of samples) on the corresponding compressive strength and drying shrinkage at various ages was studied. The outcomes of this research revealed that the composition of the binders has a substantial impact on the characteristics of concrete. In addition, the casting temperature and curing regimes also have a huge role on the compressive strength of concrete produced with binary binders. For example, the compressive strength at 3 days of concrete made at 25 °C made with binary binders was reduced up to 31% compared to that made with only OPC as the binder when cured using wet burlap. Nonetheless, less than 38 ℃ was suitable to minimize the durability issues in the studied blended cement mixes.

     

Determination of metal accumulation in deposited street dusts in Amman, Jordan

Street dust samples (120 in total) were collected under stable weather conditions during the hot, dry season (August and September) of 2004 from six different localities (industrial, heavy traffic, medium traffic, light traffic, low traffic and rural) in greater Amman, the capital of Jordan. The concentrations of Fe, Cu, Cd, Pb, Zn and Ni in the dusts were determined by atomic absorption spectrophotometry. The high concentrations of Pb, Fe and Zn in the street dust samples were related to both anthropogenic (industrial sources combined with traffic sources) and natural sources. Surprisingly, the concentrations of Cd in the dusts were low. Correlation coefficient analysis and principle component analysis identified three main sources of these elements and the corresponding distributions. The elements Pb, Zn, Cd, Fe, Cu and Ni were mainly derived from industrial sources, with Pb and Zn additionally derived from traffic sources. The street dusts were found to have highly elevated levels of Zn, particularly along the main trunk roads, indicating that the Zn in the street dusts may be derived from traffic sources, especially vehicle tyres. The concentrations of metals in the different street dust samples were found to vary depending on the density of traffic.     

Vaquita Bycatch in Mexico's Artisanal Gillnet Fisheries: Driving a Small Population to Extinction

Abstract: The world's most endangered marine cetacean, the vaquita (   Phocoena sinus ), continues to be caught in small-mesh gillnet fisheries throughout much of its range. We monitored fishing effort and incidental vaquita mortality in the upper Gulf of California, Mexico, from January 1993 to January 1995 to study the magnitude and causes of the incidental take. Of those factors studied, including net mesh size, soaktime, and geographic area, none contributed significantly to the incidental mortality rate of the vaquita, implying that the principal cause of mortality is fishing with gillnets per se . The total estimated incidental mortality caused by the fleet of El Golfo de Santa Clara was 39 vaquitas per year (95% CI = 14, 93), over 17% of the most recent estimate of population size. El Golfo de Santa Clara is one of three main ports that support gillnet fisheries throughout the range of the vaquita. Preliminary results indicate that fishing effort for San Felipe, Baja California, is comparable to that of El Golfo de Santa Clara, suggesting that this estimate of incidental mortality of vaquitas represents a minimum. We strongly recommend a complete and permanent ban on gillnets in the area. Alternative or supplemental mitigation strategies include (1) a maximum annual allowable mortality limit of vaquitas; (2) mandatory observer coverage of all boats fishing within the Upper Gulf of California and Colorado River Delta Biosphere Reserve; (3) extension of the Upper Gulf of California and Colorado River Delta Biosphere Reserve to encompass all known vaquita habitat; (4) rigorous enforcement of new and existing regulations; and (5) development of alternative sources of income for gillnet fishers.     

HYDROLOGICAL,METEOROLOGICAL, AND AGRICULTURAL RELATIONS IN NORTHERN IRAQ1

ABSTRACT: The northern regions of Iraq, an area comprised of mountains and undulating plains, has for centuries been the main granary for the country. Its agricultural production is largely dependent upon natural rainfall which ranges from about 300 to 1,000 mm/yr. Grain yields can be greatly improved by use of improved varieties and management practices. Equations are developed to show relationships between various hydrologic and meteorologic parameters with yields of wheat and barley. The amount of supplementary water needed to maximize grain yields is also shown.     

COST COMPARISON BETWEEN CESSPOOL AND SANITARY SEWERAGE SYSTEMS IN SAUDI URBAN AREAS1

ABSTRACT: Extensive use is made of on-site wastewater disposal systems of cesspools due to the absence of a sanitary sewerage system in Saudi urban areas. This system has caused the groundwater table to rise to a public nuisance level. A health risk has also evolved. There are several infrastructural, environmental, and social impacts from this, resulting in great financial losses. Examples are: surface water flooding, damage to foundations of buildings and asphalt street pavements, flooded basements and added construction costs required for excavation, dewatering, insulation materials, and special cements. Most of these costs are indirectly being paid by the private and public sectors. This study compares the estimated costs of damage and losses with the estimated costs of building, operating, and maintaining sanitary sewerage systems in the cesspool-served areas. The annual cost of the cesspool system, depending on the severity of the adverse impacts, ranges from 2.2 to 4.4 times the annual cost of the sanitary sewerage system. Remedies for these impacts are very expensive, and delays in the implementation of the sanitary sewerage facility will make the damage recovery more expensive, and in some cases, impossible. Thus, it is recommended that highest priority to be given to the sanitary sewerage systems in Saudi urban areas.     

USE OF WATER FROM THE ANCIENT MAKKAH GALLERIES FOR IRRIGATION1

ABSTRACT: Due to the spread of Islam in the seventh century the number of pilgrims to the City of Makkah increased sharply, resulting in an acute water shortage. To solve this problem, galleries were built to collect water from the upstream of Wadi Naaman and transfer it to Makkah. Expansion of Makkah and the absence of any mapping of the galleries have resulted in the destruction of a part of the galleries. This caused a discontinuity of flow in the galleries and, consequently, the ground water table is rising at a rate of 0.48 m/yr, causing environmental problems. Research was conducted to rehabilitate the destructed part of the galleries, and to find an appropriate use for the ground water. The study found that the quality of the ground water is suitable for landscaping purposes, that is, for the irrigation of trees and ornamental plants.     

Municipal solid waste landfill siting using intelligent system

Historically, landfills have been the dominant alternative for the ultimate disposal of municipal solid waste. This paper addresses the problem of siting a new landfill using an intelligent system based on fuzzy inference. The proposed system can accommodate new information on the landfill site selection by updating its knowledge base. Several factors are considered in the siting process including topography and geology, natural resources, socio-cultural aspects, and economy and safety. The system will rank sites on a scale of 0-100%, with 100% being the most appropriate one. A weighting system is used for all of the considered factors. The results from testing the system using different sites show the effectiveness of the system in the selection process.     

Remediation of drinking water contaminated with arsenic by the electro-removal process using different metal electrodes

The purification of water by the electro-removal process using different metal electrodes is widely used in different spheres of science and industry. The comparative characteristics under galvanostatic conditions of zinc (Zn), brass (Cu-Zn), copper (Cu) and iron (Fe) anodes for arsenic (As) removal from water by the electro-removal process in laboratory scale experiments were determined at current densities of 1.5, 3 and 12 mA cm(-2) for 60 min, from a solution containing different concentrations of As(v) (from 70 to 130 microg L(-1)). The results at these different current densities indicated that rapid arsenic removal was achieved at higher current densities (12 mA cm(-2)), with the chemical precipitation of arsenate complexes. The removal of As was relatively efficient, with the following tendency (at 1.5 mA cm(-2)): Fe (>93%) congruent with Zn (>93%) > Cu-Zn (>73%) >Cu (>67%), these efficiencies were relatively independent of the removal rate for all the initial arsenic concentrations investigated. This behaviour is attributed to the electrochemical intrinsic properties of the most active metals, and to the chemical precipitation reactions following the electrochemical process, iron being the most attractive metal for arsenic removal for practical applications.