Heavy metal enrichment in surface sediments from the SW Gulf of Mexico

The south west coastal zone in the Gulf of Mexico is an area with great industrial and agricultural development, which experiences intensive prospecting and extraction of hydrocarbons. After running through industrial, agricultural, and urban areas, waters from both the Jamapa River and La Antigua River arrive here. The rivers’ discharge areas of influence were estimated considering the textural and chemical composition of the supplied sediments. The main factors that determine sediment distribution were mineralogy, heavy minerals, carbonates, and anthropic contributions. The presence of metals in excess was evaluated using various pollution indicators, such as the enrichment factor, contamination factor, modified contamination factor, and geo-accumulation indexes. Data from different used contamination indexes show metal enrichments in As, Cu, Zn, Co, Cr, and V in La Antigua; As, Cu, and Cr in Jamapa; and As, Zn, and Pb in the Continental slope area. The adverse effects of metals on aquatic organisms were assessed using sediment quality guidelines that show Ni, As, Cu, and Cr may produce adverse effects on coastal areas. There was no evidence of contamination associated to the oil industry.     

Inactivation of pathogenic micro-organisms in hospital waste using a microwave

The aim of this study was to investigate the efficiency of dry sterilization by microwave in the inactivation of pathogenic bacteria in blood wastes. Eight bacteria strains were selected for this purpose and these are S. aureus, Salmonella sp., E. faecalis, K. pneumonia, P. aeruginosa, E. coli, Streptococcus Group B and Bacillus sp. Sterilization by microwave was carried out at 385, 450 and 700 watts for 1, 5 and 10 min, respectively. Isolation and enumeration of pathogenic bacteria before and after treatments were carried out using direct plate technique and inactivation was determined in terms of log reduction. Increasing the running time and power to 10 min and 700 watts did not increase log reduction of most of pathogenic bacteria especially of gram negative bacteria. Revival of pathogenic bacteria during the storage period might be aided by the presence of a low moisture content which helps bacterial cells to revive but not to reproduce or over-grow. It can be concluded that dry sterilization of blood wastes by microwave reduces the number and limited re-growth of these pathogenic bacteria during storage time, due to the lower moisture content in the blood wastes.     

The effect of paraoxon on spermatogenesis in <Emphasis Type="Italic">Dugesia gonocephala</Emphasis> from the Chilean Altiplano: proliferation and apoptosis

Introduction and aims  

The Chilean Altiplano ecosystem is conserved free from contaminants and pollutants because of the absence of major local human activities such as agriculture or other industries. We studied the effects of paraoxon on proliferation and apoptosis of testicular cells during active spermatogenesis in Dugesia gonocephala collected from a pristine river (Guacollo) in the Altiplano region nearby Visviri town, Chile.     

Kinetic of formation for single carbon dioxide and mixed carbon dioxide and tetrahydrofuran hydrates in water and sodium chloride aqueous solution

A laboratory-scale reactor system is built and operated to measure the kinetic of formation for single and mixed carbon dioxide–tetrahydrofuran hydrates. The T-cycle method, which is used to collect the kinetic data, is briefly discussed. For single carbon dioxide hydrate, the induction time decreases with the increase of the initial carbon dioxide pressure up to 2.96 MPa. Beyond this pressure, the induction time is becoming relatively constant with the increase of initial carbon dioxide pressure indicating that the liquid phase is completely supersaturated with carbon dioxide. Experimental results show that the inclusion of tetrahydrofuran reduces the induction time required for hydrate formation. These observations indicate hydrate nucleation process and onset growth are more readily to occur in the presence of tetrahydrofuran. In contrast, the presence of sodium chloride prolongs the induction time due to clustering of water molecules with the ions and the salting-out effects. It is also shown that the degree of subcooling required for hydrate formation is affected by the presence of tetrahydrofuran and sodium chloride in the hydrate forming system. The presence of tetrahydrofuran in the hydrate system significantly reduces the amount of carbon dioxide uptake. The apparent rate constant, k, for those systems are reported.     

A study of heavy metals and their fate in the composting of tannery sludge

Tannery waste is categorized as toxic and hazardous in Malaysia due to its high content of Cr (in excess of 500 mg/kg) and other heavy metals. Heavy metals, when in high enough concentrations, have the potential to be both phytotoxic and zootoxic. Heavy metals are found as contaminants in tannery sludge. This investigation aimed to identify the fate of chromium, cadmium, copper, lead, and zinc concentrations in tannery sludge throughout a 50-day composting cycle. The results of this study showed a general increase in the removal of Cr, Cd, Pb, and to a much smaller extent Zn and Cu, manifested by a decrease in their overall concentrations within the solid fraction of the final product (the decreases were likely the result of leaching). Furthermore, in using a sequential extraction method for sludge composting at different phases of treatment, a large proportion of the heavy metals were found to be associated to the residual fraction (70-80%) and fractions more resistant to extraction, X-NaOH, X-EDTA, X-HNO3 (12-29%). Less than 2% of the metals were bound to bioavailable fractions X-(KNO3+H2O).     

Experimental study on electrostatic charging of polymer powders in mixing processes

Powder mixing is often carried out in the chemical and pharmaceutical industries. Electrostatic charges generated on polymer powders during mixing may lead to electrostatic problems due to the poor conductivity of those powders. In this study, we investigated the electrostatic charges, surface potential, and apparent volume resistivity of sample powders using a simple mixing device utilizing the Faraday cup method. To neutralize the charged powders, we also applied an AC-type ionizer in the mixing study. A commercial polyethylene powder with a mean particle size of 585 μm was tested in this experiment. The charge-to-mass ratios at the end of 600 s of mixing were ?0.075 nC/g at 295 rpm agitation speed, ?0.21 nC/g at 495 rpm, and ?0.31 nC/g at 660 rpm, high enough to cause electrostatic agglomeration and adhesion. The electric fields based on the surface potential on the powders were several hundreds of V/cm, too small to give rise to brush discharge. The apparent volume resistivity of powders estimated by a simple measurement system is 1.0 × 10¹⁶ Ωm, in reasonable agreement with that acquired by the conventional test cell method (5.9 × 10¹⁵ Ωm). The charging level on the polymer powders was reduced with an AC-ionizer.     

Reproductive plasticity in mole crabs, Emerita brasiliensis, in sandy beaches with contrasting morphodynamics

Ovarian macroscopical analysis, histological validation and field sampling procedures were used to evaluate the variability in reproductive traits of the mole crab Emerita brasiliensis Schmitt, 1935 (Decapoda: Hippidae) in two exposed sandy beaches of Uruguay with contrasting morphodynamics. All developmental stages involved in the complex life cycle exhibited lower abundance, individual size and temporal occurrence in a harsh reflective beach, compared with a more benign dissipative environment. In addition, this population showed more compressed events of the reproductive cycle (e.g oogenesis, encounter of potential mate and female parental care) and recruitment period. However, the beginning of the vitellogenesis, ovary maturity, male sexual differentiation and ending of spermatogenesis occurred at smaller sizes under dissipative conditions. These results disagree with the recent findings of delayed sexual maturity in dissipative beaches. We postulate that, in dissipative conditions, high food availability might allow an overlapping of reproductive and moulting processes, and thus females may reach optimum size and sexual maturity with fewer moults than in reflective beaches. Hence, reproductive responses must be considered not only in relation to environmental harshness, but also in the context of life history traits and their phylogenetic and allometric constraints. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Laboratory scale analysis of the influence of different heat transfer mechanisms on liquid nitrogen vaporization rate

The prediction of the potential hazards associated to accidental liquefied natural gas (LNG) spills has motivated a number of different studies including experimental and numerical approaches. Most of these studies focus on dispersion predictions, however there is limited information regarding source term of it: liquid spill and vaporization. There is a need of further improvements on the understanding of these phenomena and the quantification of the most important parameters that can affect them.The vaporization of cryogenic liquids is governed by the heat transfer phenomena including conduction, convection and thermal radiation mechanisms. The present work investigates the contribution of each of these heat transfer modes to the vaporization rate of cryogenic liquid nitrogen (LN₂) contained in a Dewar flask using well controlled and instrumented laboratory scale experiments. LN₂ vaporization rate was measured with individually controllable contributions from convective (generated by an electric fan) and thermal radiative (generated by light bulb) heat transfer in the presence of a baseline conductive heat transfer rate.In both cases of convection and radiation analysis the experimental study showed that they can play a significant role in the vaporization rate of LN₂. It was observed that the radiative heat absorbed by the LN₂ during the vaporization experiment represents only 50%–65% of the incident radiation that would reach the LN₂ pool surface if no vapour was present. Convective heat transfer generated by the fan was shown to have had the most significant contribution to the total heat transfer. As expected, this contribution was significantly higher than the one from bulb radiation. The experimental data also showed that the liquid level in the Dewar play a key role in the resulting amount of convective heat transfer. This could be attributed to the fact that lower liquid level the side walls of the Dewar were high enough to hold a layer of vapour and limit air motion directly above the liquid surface, thus limiting the heat transfer by convection.     

Supplementation with selenium nanoparticles alleviates diabetic nephropathy during pregnancy in the diabetic female rats

Environmental Science and Pollution Research - The bioactivity of nanoparticles has engendered a promise in scientific communities for developing novel therapeutic strategies. This study...