Domestic water conservation potential in Saudi Arabia

Domestic water conservation in arid climates can result in efficient utilization of existing water supplies. The impacts of conservation measures such as the installation of water-saving devices, water metering and pricing schemes, water rationing and public awareness programs, strict plumbing codes, penalties for wasting water, programs designed to reduce leakage from public water lines and within the home, water-efficient landscaping, economic and ethical incentives are addressed in detail. Cost savings in arid climates, with particular reference to Saudi Arabia, in relation to some conservation techniques, are presented. Water conservation technology and tentative demonstration and implementation of water conservation programs are discussed.     

The grassroot development planning process: the role of physical planning in the rural environment

The concern of this paper is with the spatial consequences of development in a given rural setting and the way in which physical planning fits into the revival of a dying rural area, particularly in Third World Countries. It is based on experience derived from Dekinal in Benue State, Nigeria and endeavours to define a rural area by briefly discussing its characteristics and highlighting its problems. It proposes a comprehensive development planning process to induce development based on available resources.     

AN ECONOMIC ASSESSMENT OF GROUND WATER RECHARGE IN THE TUCSON BASIN1

ABSTRACT: Bringing water from Colorado River via the Central Arizona Project was perceived as the sole solution for Tucson Basin's water problem. Soon after Central Arizona Project's water arrived in Tucson in 1992, its quality provoked a quarrel over its use for potable purposes. A significant outcome of that quarrel was the enactment of the 1995 Proposition 200. The Proposition 200 precludes the use of Central Arizona Project's water for potable purposes, unless it is treated. Yet, it encourages using it for non‐potable purposes and for replenishing the Tucson aquifer through recharge. This paper examines the economic issues involved in utilizing Central Arizona Project's water for recharge. Four planning scenarios were designed to measure and compare the costs and benefits with and without Central Arizona Project's water recharge. Cost‐benefit analysis was utilized to measure recharge costs and benefits and to derive a rough estimate of cost savings from preventing land subsidence. The results indicate that the institutional requirements can be met with Central Arizona Project's water recharge. The economic benefits from reducing pumping cost and saving groundwater are not economically significant. Yet, when combining the use of Central Arizona Project's water for recharge and non‐potable purposes, it demonstrates positive net economic benefits.     

An analysis of motorcycle injury and vehicle damage severity using ordered probit models

Problem: Motorcycles constitute about 19% of all motorized vehicles in Singapore and are generally overrepresented in traffic accidents, accounting for 40% of total fatalities. Method: In this paper, an ordered probit model is used to examine factors that affect the injury severity of motorcycle accidents and the severity of damage to the vehicle for those crashes. Nine years of motorcycle accident data were obtained for Singapore through police reports. These data included categorical assessments of the severity of accidents based on three levels. Damage severity to the vehicle was also assessed and categorized into four levels. Categorical data of this type are best analyzed using ordered probit models because they require no assumptions regarding the ordinality of the dependent variable, which in this case is the severity score. Various models are examined to determine what factors are related to increased injury and damage severity of motorcycle accidents. Results: Factors found to lead to increases in the probability of severe injuries include the motorcyclist having non-Singaporean nationality, increased engine capacity, headlight not turned on during daytime, collisions with pedestrians and stationary objects, driving during early morning hours, having a pillion passenger, and when the motorcyclist is determined to be at fault for the accident. Factors leading to increased probability of vehicle damage include some similar factors but also show some differences, such as less damage associated with pedestrian collisions and with female drivers. In addition, it was also found that both injury severity and vehicle damage severity levels are decreasing over time.     

Vegetation stress detection through chlorophyll a + b estimation and fluorescence effects on hyperspectral imagery

Physical principles applied to remote sensing data are key to successfully quantifying vegetation physiological condition from the study of the light interaction with the canopy under observation. We used the fluorescence-reflectance-transmittance (FRT) and PROSPECT leaf models to simulate reflectance as a function of leaf biochemical and fluorescence variables. A series of laboratory measurements of spectral reflectance at leaf and canopy levels and a modeling study were conducted, demonstrating that effects of chlorophyll fluorescence (CF) can be detected by remote sensing. The coupled FRT and PROSPECT model enabled CF and chlorophyll a + b (Ca + b) content to be estimated by inversion. Laboratory measurements of leaf reflectance (r) and transmittance (t) from leaves with constant Ca + b allowed the study of CF effects on specific fluorescence-sensitive indices calculated in the Photosystem I (PS-I) and Photosystem II (PS-II) optical region, such as the curvature index [CUR; (R675.R690)/R2(683)]. Dark-adapted and steady-state fluorescence measurements, such as the ratio of variable to maximal fluorescence (Fv/Fm), steady state maximal fluorescence (F'm), steady state fluorescence (Ft), and the effective quantum yield (delta F/F'm) are accurately estimated by inverting the FRT-PROSPECT model. A double peak in the derivative reflectance (DR) was related to increased CF and Ca + b concentration. These results were consistent with imagery collected with a compact airborne spectrographic imager (CASI) sensor from sites of sugar maple (Acer saccharum Marshall) of high and low stress conditions, showing a double peak on canopy derivative reflectance in the red-edge spectral region. We developed a derivative chlorophyll index (DCI; calculated as D705/D722), a function of the combined effects of CF and Ca + b content, and used it to detect vegetation stress.     

A 50 MW concentrating solar power plant for Jordan

The potential of concentrating solar power plant (CSPP) technology in Jordan is assessed and the next steps for development of the first CSPP in the country are presented. For this purpose, a prototype of a 50 MW CSPP for electricity generation in Jordan is proposed and analysis of its economic feasibility has been performed. Moreover, a calculation model – using the concept design of the proposed CSPP, and the solar irradiation data – was developed to estimate the energy yield of the plant. Based on the analyzed solar irradiation data, it was found that Jordan has an outstanding potential for CSPP, especially in the southern locations of the country such as Quweira. At the same time Jordan's energy master plan is seeking for independent energy supply and for an increasing share of renewable energies. Furthermore, Jordan's demand curve over a day closely matches the electricity production of the proposed plant. Combination of these factors creates a very favorable situation. Therefore, establishment of the proposed 50 MW CSPP is highly recommended not only in Jordan, but also in many other countries, which have similar political and economical conditions such as those countries located in the Middle East and North Africa (MENA) region.     

Economic benefits from decreased mercury emissions: Projections for 2020

Anthropogenic processes have increased the exposure of humans and wildlife to toxic methyl mercury (MeHg). Mercury emissions will increase by about 25% between 2005 and 2020, if the present trajectory is maintained. A global assessment of societal damages caused by the ingestion of methyl mercury, based merely on loss of IQ (Intelligence Quotient), suggests that the annual cost will be approximately US$3.7 billion (2005 dollars) in 2020. The corresponding cost of damages resulting from the inhalation of methyl mercury is estimated at US$2.9 million (2005 dollars). Under a higher degree of emission control such as in the case of the Extended Emission Control (EXEC) and the Maximum Feasible Technological Reduction (MFTR) scenarios, total emissions could decrease in the period 2005–2020 by about 50–60%. The corresponding annual benefits in 2020 are estimated to be about US$1.8–2.2 billion (2005 dollars). Large economic benefits can be achieved by reducing global mercury emissions.     

Potential environmental impact of dissolution of raw phosphate in sea water of the Gulf of Aqaba

Dissolution of raw phosphate (apatite) in sea water of the Gulf of Aqaba was investigated through lab incubation experiments. Three types from three different sources (Al-Hasa, Al-Abyad and Esh-Shydiya) have been used for these experiments. Impact of quantity, grain size, and source (type) of raw phosphate on dissolution rate were studied. Statistical analysis shows significant differences between the results obtained from comparing each two weights; as weight of apatite increased, dissolved inorganic phosphate-phosphorus (DIP) and fluoride in sea water solution increased. The differences between the dissolution rates of raw phosphate from the three sites were not significant while the differences between the different grain size fractions were significant. Dissolution rates were inversely related to particle size. Using a worst-case scenario, a conservative estimate of the maximum increase in DIP in seawater of the Gulf of Aqaba due to the apatite particles lost to the sea during ship loading resulted in DIP concentrations of 0.03 μM per year. As the residence time of the water in the Gulf of Aqaba is about one year, the DIP concentration will not increase by more than 0.03 μM under the estimated annual quantity of exported phosphate. Fluoride will not increase by more than 0.03 mg/l under the same conditions.     

Prevalence of Rotaviruses Groups A and C in Egyptian Children and Aquatic Environment

The objective of this study is to compare the prevalence of rotaviruses groups A and C in Egyptian children and aquatic environment. From 110 stool specimens of children with acute diarrhea and using RT-PCR, 35 samples (31.8 %) were positive for human rotavirus group A and 15 samples (13.6 %) were positive for human rotavirus group C. From 96 samples collected from Zenin wastewater treatment plant over a 2-year period (November 2009–October 2011) and using RT-PCR, rotavirus group A was detected in (4/24) 16.7 %, (5/24) 20.8 %, (4/24) 16.7 %, and (4/24) 16.7 %, while rotavirus group C was detected in (2/24) 8.3 %, (3/24) 12.5 %, (3/24) 12.5 %, and (0/24) 0 % in raw sewage, after primary sedimentation, after secondary sedimentation, and after final chlorination, respectively. Moreover, from 96 samples collected from El-Giza water treatment plant over a 2-year period (November 2009–October 2011), rotavirus group A was detected in (7/24) 29.2 %, (6/24) 25 %, (5/24) 20.8 %, and (3/24) 12.5 %, while rotavirus group C was detected in (3/24) 12.5 %, (1/24) 4.2 %, (1/24) 4.2 %, and (0/24) 0 % in raw Nile water, after sedimentation, after sand filtration, and after final chlorination, respectively. Using SYBR Green real-time RT-PCR, the number of human rotavirus group A genome or infectious units was higher than rotavirus group C. VP6 sequence analysis of the RT-PCR positive rotavirus group C samples revealed that four clinical specimens and three environmental samples showed similar sequences clustered with Moduganari/Human Nigerian strain AF 325806 with 98 % homology, and two clinical specimens and one environmental sample showed similar sequences clustered with Dhaka CB/Human Bangladesh strain AY 754826 with 97 % homology.     

Investigation of physico-chemical properties and microbial community during poultry manure co-composting process

Co-composting of poultry manure and rubber wood sawdust was performed with the ratio of 2:1(V/V) for a period of 60 days. An investigation was carried out to study the extracellular enzymatic activities and structural degradation utilizing Fourier transform infrared spectroscopy(FT-IR), thermogravimetry and differential thermal analysis(TG/DTA)and scanning electron microscopy(SEM). The microbial succession was also determined by using denaturing gel gradient electrophoresis(DGGE). The compost was able to reach its highest temperature of 71°C at day 3 and stabilized between 30 and 40°C for 8 weeks.CMCase, FPase and β-glucosidase acted synergistically in order to degrade the cellulosic substrate. The xylanase activities increased gradually during the composting and reached the peak value of 11.637 U/g on day 35, followed by a sharp decline. Both Li P and Mn P activities reached their peak values on day 35 with 0.431 and 0.132 U/g respectively. The FT-IR spectra revealed an increase in aromaticity and a decrease in aliphatic compounds such as carbohydrates as decomposition proceeded. TGA/DTG data exhibited significant changes in weight loss in compost samples, indicating degradation of organic matter. SEM micrographs showed higher amounts of parenchyma exposed on the surface of rubber wood sawdust at day 60, showing significant degradation. DGGE and 16 S r DNA analyses showed that Burkholderia sp., Pandoraea sp., and Pseudomonas sp. were present throughout the composting process. Ornithinibacillus sp. and Castellaniella ginsengisoli were only found in the initial stage of the composting, while different strains of Burkholderia sp. also occurred in the later stage of composting.