Environmental estrogenic effects and gonadal development in wild goldfish (Carassius auratus)

Serum vitellogenin (VTG) contents of wild goldfish (Carassius auratus) were investigated as a sensitive biomarker for artificial estrogenic compounds in aquatic environments. Goldfish was sampled from a pristine area, a river situated 5 km downstream from a sewage treatment works (STW), and also from the Young-San River in Korea. The female yolk precursor protein VTG was not detected when gonadosomatic index (GSI) was less than 0.85%, while VTG levels of >10 microg/ml were found in males whose GSI was less than 1.53%. In male goldfish sampled from STW and the Young-San River, the higher VTG corresponded to lower GSI. This study suggested a trend that gonad development was connected to VTG levels in both sexes, and the application of GSI and histological analysis provide an attractive possibility that it could be included in the panel of markers used for estrogenic activity investigation of aquatic environments.     

The role and distribution of total suspended solids in the macrotidal coastal waters of Korea

Spatial and temporal distribution patterns of total suspended solids (TSS) in the shallow and macrotidal regions of the Korean peninsula indicated there were significant changes in TSS concentrations. These were seasonally influenced by the wind, river input and tidal cycle. There were high TSS values at estuarine and river mouth stations and during low tide due to the re-suspension of bottom sediment by strong wind action during winter months, in addition the land input through rivers and strong tidal current during ebbing. Monthly mean values of TSS significantly correlated with wind speed and nitrate concentration (p < 0.01). This indicated that the resuspension of surface sediment was a more important source of TSS than the river input, and that nitrate was introduced into the water column during the resuspension process. TSS were seven times higher at low tide than in high tide. Light penetration was significantly inhibited by TSS; as >98% of incident light was absorbed within 2 m and zero photosynthetically active radiation (PAR) under 2 m in the estuarine stations during winter. Removal of heavy metals and nutrients by TSS in the water column was evident. Over 80% of the initial concentration of nutrients was removed within 10 min under various concentrations of TSS and also TSS contained significantly higher concentration of heavy metals than surface sediment. The concentration levels of nutrients and chemical oxygen demand in the west coast were comparable with the East and South Sea, even the major rivers in the Korean peninsula flow into the West Sea with major pollutant loadings into the coastal areas. High concentration of TSS is likely to contribute to the removal process of these pollutants, resulting in relatively lower levels of nutrients and organic materials in these coastal waters.     

Environmental quality of Korean coasts as determined by modified Shannon–Wiener evenness proportion

The coast of the Korean peninsula experiences a range of human impacts, including pollution, shipping, reclamation, and aquaculture, that have motivated numerous local studies of macrobenthic organisms. In this paper, 1,492 subtidal stations were compiled from 23 studies (areas) to evaluate environmental quality on a broader scale. A common index in biomonitoring, Shannon–Wiener evenness proportion (SEP), could not incorporate azoic or single-species samples. This shortcoming was overcome by developing an inverse function of SEP (ISEP), which was positively correlated with independent measures of water quality available for nine sites and was not biased by the size of the sampling unit. Additionally, at Shihwa Dike, where samples were collected before and after reinstating a tidal connection with the ocean, ISEP values improved over time, as expected. Thus, it is now possible to assign Korean subtidal sites to seven ISEP “grades” and to use their values and trends to guide coastal management.     

Continuous and filter-based measurements of PM2.5 nitrate and sulfate at the Fresno Supersite

PM(2.5) nitrate [Formula: see text] and sulfate ([Formula: see text]) were measured continuously with R&P8400N and R&P8400S instruments, respectively, and compared with filter-based measurements at the Fresno Supersite from October, 2000 through December, 2005. [Formula: see text] concentrations were higher in winter than summer with a long-term decreasing trend. Correlations between 24-h average continuous and filter-based [Formula: see text] were greater than 0.96 in 4 out of 5 years. Continuous [Formula: see text] was generally lower than filter-based [Formula: see text] although the difference decreased over time, from -52% in 2001 to +13% in 2005. These differences were similar in winter (-23%) and summer (-19%) while the corresponding differences between ambient and instrument temperature were -12 and 0.7 degrees C, respectively. Neither seasonal nor long-term trends in [Formula: see text] can be explained by variations in ambient temperature, the difference between ambient and instrument temperature, or changes in aerosol chemical composition. There were no seasonal or long-term trends in [Formula: see text] concentrations, partially due to low concentrations observed in Fresno. Long-term variability in the performance of R&P8400 [Formula: see text] and [Formula: see text] instruments suggest that collocation with filter measurements is needed for long-term measurements.     

Evaluation of antifouling activity of eight commercially available organic chemicals against the early foulers marine bacteria and Ulva spores

Environmental impacts caused by tin and copper based commercial antifouling (AF) paints were proved to be detrimental to aquatic ecosystems. Therefore, a search of environmental friendly AF compounds to be used in marine paint to protect the surface of maritime developmental structures from the unwanted biofouling is a burning issue of the present time. Commercially available eight organic chemicals--allyl isothiocyanate, beta-myrecene, cis-3-hexenyl acetate, citral, ethyl heptanoate, eugenol, methyl caproate, and octyl alcohol were evaluated forAF activities using both laboratory and field assays. The test chemicals were found to repel the target motile marine bacteria--Alteromonas marina, Bacillus atrophaeus, Roseobactergallaeciensis and Shewanella oneidensis and motile spores of the green alga, Ulva pertusa. The bacterial and Ulva spore repulsion activities of the test chemicals were measured by chemotaxis and agar diffusion methods respectively interestingly these test chemicals were less toxic to the test fouling species. The toxicity of the test chemicals was measured by using antibiotic assay disks against the bacteria and motility test against Ulva spores. Moreover, in field assay, all test chemicals showed a perfect performance ofAF activity showing no fouling during the experimental period of one year Such results and commercial as well as technical feasibility of the test chemicals firmly showed the possibility of using as alternatives of the existing toxic AF agents.     

The effects of <Emphasis Type="Italic">Acidithiobacillus ferrooxidans</Emphasis> on the leaching of cobalt and strontium adsorbed onto soil particles

Bioleaching from soil artificially contaminated with analogues of radionuclides, Co and Sr, was carried out using a Fe-oxidizing bacterium, Acidithiobacillus ferrooxidans. Due to bacterial metabolism, the pH and dissolved Fe³⁺ concentration in a biotic slurry decreased and increased respectively, over time, but the concentrations of Co and Sr extracted from the soil showed no significant enhancement compared with those under abiotic control. In both cases, Co and Sr were leached from the soil during the initial period of the experiment, due to the initially low solution pH of 2.0, and the dissolved concentrations remained almost constant for the duration of the experiment (300 h). Since oxidation of Fe²⁺ by A. ferrooxidans led to the production of Fe precipitates and colloidal suspensions, the Co and Sr extracted into solution were most likely re-adsorbed onto the Fe solids. Also, A. ferrooxidans, without an external supply of Fe²⁺, extracted almost equal or greater amounts of Co and Sr from the soil than when Fe²⁺ was supplied. Under the same leaching conditions, the extent of Sr removal was much lower than that of Co. On the contrary to the high efficiency of microbial metal leaching in biohydrometallurgy for low-graded sulfide ores, which has been widely documented, conventional bioleaching techniques with A. ferrooxidans supplied with enough Fe²⁺ showed low efficiency for the removal of radionuclides loosely bound onto soil particle surfaces.     

Optimization of co-digestion of various industrial sludges for biogas production and sludge treatment: Methane production potential experiments and modeling

Optimal biogas production and sludge treatment were studied by co-digestion experiments and modeling using five different wastewater sludges generated from paper, chemical, petrochemical, automobile, and food processing industries situated in Ulsan Industrial Complex, Ulsan, South Korea. The biomethane production potential test was conducted in simplex-centroid mixture design, fitted to regression equation, and some optimal co-digestion scenarios were given by combined desirability function based multi-objective optimization technique for both methane yield and the quantity of sludge digested. The co-digestion model incorporating main and interaction effects among sludges were utilized to predict the maximum possible methane yield. The optimization routine for methane production with different industrial sludges in batches were repeated with the left-over sludge of earlier cycle, till all sludges have been completely treated. Among the possible scenarios, a maximum methane yield of 1161.53 m³ is anticipated in three batches followed by 1130.33 m³ and 1045.65 m³ in five and two batches, respectively. This study shows a scientific approach to find a practical solution to utilize diverse industrial sludges in both treatment and biogas production perspectives.     

Toluene vapor capture by activated carbon particles in a dual gas-solid cyclone system

Capturing of odorous compounds such as toluene vapor by a particulate-activated carbon adsorbent was investigated in a gas-solid cyclone, which is one type of mobile beds. The test cyclone was early modified with the post cyclone (PoC) and a spiral flow guide to the vortex finder. The proposed process may contribute to the reduction of gases and dust from industrial exhausts, especially when dealing with a low concentration of odorous elements and a large volume of dust flow. In this device, the toluene capturing efficiency at a 400 ppm concentration rose up to 77.4% when using activated carbon (AC) particles with a median size of 27.03 μm. A maximum 96% of AC particles could be collected for reuse depending on the size and flow rate. The AC regenerated via thermal treatment showed an adsorption potential up to 66.7% throughout repeated tests.

Implications: VOCs and particles have been of interest both in industrial field and public indoor spaces. In this study, a post cyclone (PoC) that utilizes a residual vortex from the mother cyclone was modified by inserting a flow guide and was applied to capture toluene vapor. The device of modified post-cyclone system can be used effectively in simultaneous treatment of gas-solid flow.     

Transgenic poplar trees expressing yeast cadmium factor 1 exhibit the characteristics necessary for the phytoremediation of mine tailing soil

Genetic engineering of plants for phytoremediation is thought to be possible based on results using model plants expressing genes involved in heavy metal resistance, which improve the plant’s tolerance of heavy metals and accumulation capacity. The next step of progress in this technology requires the genetic engineering of plants that produce large amounts of biomass and the testing of these transgenic plants in contaminated soils. Thus, we transformed a sterile line of poplar Populus alba X P. tremula var. glandulosa with a heavy metal resistance gene, ScYCF1 (yeast cadmium factor 1), which encodes a transporter that sequesters toxic metal(loid)s into the vacuoles of budding yeast, and tested these transgenic plants in soil taken from a closed mine site contaminated with multiple toxic metal(loid)s under greenhouse and field conditions. The YCF1-expressing transgenic poplar plants exhibited enhanced growth, reduced toxicity symptoms, and increased Cd content in the aerial tissue compared to the non-transgenic plants. Furthermore, the plants accumulated increased amounts of Cd, Zn, and Pb in the root, because they could establish an extensive root system in mine tailing soil. These results suggest that the generation of YCF1-expressing transgenic poplar represents the first step towards producing plants for phytoremediation. The YCF1-expressing poplar may be useful for phytostabilization and phytoattenuation, especially in highly contaminated regions, where wild-type plants cannot survive.     

Characteristics of metal contamination in paddy soils from three industrial cities in South Korea

Paddy soil contamination is directly linked to human dietary exposure to toxic chemicals via crop consumption. In Korea, rice paddy fields are often located around industrial complexes, a major anthropogenic source of metals. In this study, rice paddy soils were collected from 50 sites in three industrial cities to investigate the contamination characteristics and ecological risk of metals in the soils. The cities studied and their major industries are as follows: Ulsan (petrochemical, nonferrous, automobile, and shipbuilding), Pohang (iron and steel), and Gwangyang (iron and steel, nonmetallic, and petrochemical). Thirteen metals (Al, As, Ba, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, V, and Zn) were analyzed using inductively coupled plasma–optical emission spectrometry (ICP–OES). The mean concentration of Cd (1.98 mg/kg) exceeded the soil quality guideline of Canada (1.4 mg/kg), whereas concentrations of other metals were under the standards of both Korea and Canada. Generally, levels of metal concentrations decreased with increasing distance from industrial complexes. Among the three cities, Pohang showed high concentrations of Zn (142.2 mg/kg), and Ulsan and Gwangyang showed high concentrations of Cr (33.9 mg/kg) and Ba (126.4 mg/kg), respectively. These contamination patterns were influenced by the different major industries of each city, which was clearly demonstrated by the principal component analysis results. Pollution indices suggested that As, Cd, Pb, and Zn were enriched in the paddy soils via anthropogenic activities. Comprehensive potential ecological risk indices were at considerable levels for most sites, especially because of major contributions from As and Cd, which can pose potential ecological threats.