Removal of arsenate and arsenite from aqueous solution by waste cast iron

The removal of As(III) and As(V) from aqueous solution was investigated using waste cast iron, which is a byproduct of the iron casting process in foundries. Two types of waste cast iron were used in the experiment: grind precipitate dust (GPD) and cast iron shot (CIS). The X-ray diffraction analysis indicated the presence of Fe0 on GPD and CIS. Batch experiments were performed under different concentrations of As(III) and As(V) and at various initial pH levels. Results showed that waste cast iron was effective in the removal of arsenic. The adsorption isotherm study indicated that the Langmuir isotherm was better than the Freundlich isotherm at describing the experimental result. In the adsorption of both As(III) and As(V), the adsorption capacity of GPD was greater than CIS, mainly due to the fact that GPD had higher surface area and weight percent of Fe than CIS. Results also indicated the removal of As(III) and As(V) by GPD and CIS was influenced by the initial solution pH, generally decreasing with increasing pH from 3.0 to 10.5. In addition, both GPD and CIS were more effective at the removal of As(III) than As(V) under given experimental conditions. This study demonstrates that waste cast iron has potential as a reactive material to treat wastewater and groundwater containing arsenic.     

Potential Impacts of Climate Change on the Reliability of Water and Hydropower Supply from a Multipurpose Dam in South Korea

Future climate change is a source of growing concerns for the supply of energy and resources, and it may have significant impacts on industry and the economy. Major effects are likely to arise from changes to the freshwater resources system, due to the connection of energy generation to these water systems. Using future climate data downscaled by a stochastic weather generator, this study investigates the potential impacts of climate change on long‐term reservoir operations at the Chungju multipurpose dam in South Korea, specifically considering the reliability of the supply of water and hydropower. A reservoir model, Hydrologic Engineering Center‐Reservoir System Simulation (HEC‐ResSim), was used to simulate the ability of the dam to supply water and hydropower under different conditions. The hydrologic model Soil and Water Assessment Tool was used to determine the HEC‐ResSim boundary conditions, including daily dam inflow from the 6,642 km² watershed into the 2.75 Gm³ capacity reservoir. Projections of the future climate indicate that temperature and precipitation during 2070‐2099 (2080s) show an increase of +4.1°C and 19.4%, respectively, based on the baseline (1990‐2009). The results from the models suggest that, in the 2080s, the average annual water supply and hydropower production would change by +19.8 to +56.5% and by +33.9 to 92.3%, respectively. Model simulations suggest that under the new climatic conditions, the reliability of water and hydropower supply would be generally improved, as a consequence of increased dam inflow.     

Effects of copper (I) oxide on growth and biochemical compositions of two marine microalgae

In copper based antifouling (AF) paints Cu (I) oxide was largely used as booster biocide. In this study effect of Cu (I) oxide on two marine microalgae, Tetraselmis suecica and Dunaliella tertiolecta was demonstrated. EC50 (96 hr) concentrations estimated for T. suecica and D. tertiolecta were 1.3 mg l(-1) and 1.34 mg l(-1), respectively. Copper (I) oxide induced changes in growth, chlorophyll, carbohydrate and protein contents were observed in T. suecica and D. tertiolecta. At low concentration of 0.0625 mg l(-1), 3-26% and 1-16% growth stimulation was observed in T. suecica and T. tertiolecta respectively. Increasing Cu (I) oxide concentrations proportionately decreased the carbohydrate and protein contents. This study clearly indicates the toxicity of excessive Cu (I) oxide on growth and biochemical compositions of T. suecica and D. tertiolecta.     

Strategies for sustainable development of industrial park in Ulsan,South Korea—From spontaneous evolution to systematic expansion of industrial symbiosis

The Korea National Cleaner Production Center (KNCPC) affiliated to the Korea Institute of Industrial Technology (KITECH) has started a 15 year, 3-phase EIP master plan with the support of Ministry of Commerce, Industry, and Energy (MOCIE). A total of 6 industrial parks, including industrial parks in Ulsan city, known as the industrial capital of South Korea, are planning projects to find the feasibility of shifting existing industrial parks to eco-industrial parks. The basic survey shows that Ulsan industrial complex has been continuously evolving from conventional industrial complexes to eco-industrial parks by spontaneous industrial symbiosis. This paper describes the Korean national policies and the developmental activities of this vision to drive the global trend of innovation for converting the existing industrial parks to eco-industrial parks through inter-industry waste, energy, and material exchange in Ulsan Industrial complexes. In addition, the primary and supportive components of the Ulsan EIP pilot project, which will be implemented for 5 years is elaborated with its schedules and economic benefits.     

Perceived landscape impacts of mobile telecommunications development in the Peak District National Park,England

This study explored the public perceptions of mobile telecommunications development – new landscape elements installed to deliver new technology – in a protected area. It examined: (1) the perceived landscape impacts of such development; (2) the importance attached to the socio-economic value of mobile telecommunications; and (3) the factors underlying the perceived landscape impacts of mobile telecommunications development. A postal questionnaire survey was conducted in the Peak District National Park, England with 420 respondents drawn from National Park residents and visitors, urban dwellers and members of environmental organisations. The study suggests that: (1) there was a prevailing antipathy towards the landscape impacts of mobile telecommunications development in the National Park; (2) apart from emergency uses, the other socio-economic benefits of mobile telecommunications technology were thought to be relatively unimportant in the National Park; and (3) rather than socio-demographic characteristics, it was respondents' understandings of protected areas' needs for the technology and potential health risks that had significant effects on the perceived landscape impacts. Overall, this study suggests that the significance of National Park landscapes is respected by the public, even when setalongside the convenience of modern technology, which has substantial implications for landscape planning and management in protected areas.     

Demonstration of a high throughput on-board hydrogen generation reactor system using aluminum coil as fuel for a vehicle

A novel on-board hydrogen generation concept using Al coil with NaOH was investigated. The reaction rate was successfully controlled by introducing a pumping system for the NaOH solution. The time for the flow to develop fully was mainly dependent on the solution temperature, and the fastest start time recorded was 60 sec at a solution temperature of 70°C. The maximum H₂ generation rate was 200 L min^–1 with a prototype design of the on-board hydrogen generation system 1/8 times the size of a full-size reactor. The H₂ generation process coupled with the solution pumping system was simulated with three-dimensional fluid dynamic software, and the calculated H₂ flow and temperature rise of the system were validated with experimental data.     

Wood pellet fly ash and bottom ash as an effective liming agent and nutrient source for rye grass (Lolium perenne L.) and oats (Avena sativa)

Fly ash (FA) and bottom ash (BA) from a softwood pellet boiler were characterized and evaluated as soil amendments. In a greenhouse study, two plant species (rye grass, Lolium perenne L. and oats, Avena sativa) were grown in three different treatments (1% FA, 1% BA, non-amended control) of a silty loam soil. Total concentrations of plant nutrients Ca, K, Mg, P and Zn in both ashes were elevated compared to conventional wood ash. Concentrations of Cd, Cr, Pb, Se and Zn were found to be elevated in the FA relative to BA and the non-amended soil. At 28 d, oat above-ground biomass was found to be significantly greater in soil amended with FA. Potassium and Mo plant tissue concentrations were significantly increased by addition of either ash, and FA significantly increased Zn tissue concentrations. Cadmium and Hg tissue concentrations were elevated in some cases. As soil amendments, either pellet ash is an effective liming agent and nutrient source, but high concentrations of Cd and Zn in FA may preclude its use as an agricultural soil amendment in some jurisdictions. Lower ash application rates than those used in this study (i.e. <1%) may still provide sufficient nutrients and effective neutralization of soil acidity.     

Sensitivity of surface characteristics on the simulation of wind-blown-dust source in North America

Recently, a wind-blown-dust-emission module has been built based on a state-of-the-art wind erosion theory and evaluated in a regional air-quality model to simulate a North American dust storm episode in April 2001 (see Park, S.H., Gong, S.L., Zhao, T.L., Vet, R.J., Bouchet, V.S., Gong, W., Makar, P.A., Moran, M.D., Stroud, C., Zhang, J. 2007. Simulation of entrainment and transport of dust particles within North America in April 2001 (“Red Dust episode”). J. Geophys. Res. 112, D20209, doi:10.1029/2007JD008443). A satisfactorily detailed assessment of that module, however, was not possible because of a lack of information on some module inputs, especially soil moisture content. In this paper, the wind-blown-dust emission was evaluated for two additional dust storms using improved soil moisture inputs. The surface characteristics of the wind-blown-dust source areas in southwestern North America were also investigated, focusing on their implications for wind-blown-dust emissions. The improved soil moisture inputs enabled the sensitivity of other important surface characteristics, the soil grain size distribution and the land-cover, to dust emission to be investigated with more confidence. Simulations of the two 2003 dust storm episodes suggested that wind-blown-dust emissions from the desert areas in southwestern North America are dominated by emissions from dry playas covered with accumulated alluvial deposits whose particle size is much smaller than usual desert sands. As well, the source areas in the northwestern Texas region were indicated to be not desert but rather agricultural lands that were “activated” as a wind-blown-dust sources after harvest. This finding calls for revisions to the current wind-blown-dust-emission module, in which “desert” is designated to be the only land-cover category that can emit wind-blown dust.     

Morphological and chemical composition characteristics of summertime atmospheric particles collected at Tokchok Island,Korea

Determination of the chemical compositions of atmospheric single particles in the Yellow Sea region is critical for evaluating the environmental impact caused by air pollutants emitted from mainland China and the Korean peninsula. After ambient aerosol particles were collected by the Dekati PM10 cascade impactor on July 17–23, 2007 at Tokchok Island (approximately 50 km west of the Korean coast nearby Seoul), Korea, overall 2000 particles (on stage 2 and 3 with cut-off diameters of 2.5–10 μm and 1.0–2.5 μm, respectively) in 10 samples were determined by using low-Z particle electron probe X-ray microanalysis. X-ray spectral and secondary electron image (SEI) data showed that soil-derived and sea-salt particles which had reacted or were mixed with SO₂ and NO_x (or their acidic products) outnumbered the primary and “genuine” ones (59.2% vs. 19.2% in the stage 2 fraction and 41.3% vs. 9.9% in the stage 3 fraction). Moreover, particles containing nitrate in the secondary soil-derived species greatly outnumbered those containing sulfate. Organic particles, mainly consisting of marine biogenic species, were more abundant in the stage 2 fraction than in the stage 3 fraction (11.6% vs. 5.1%). Their relative abundance was greater than the sum of carbon-rich, K-containing, Fe-containing, and fly ash particles, which exhibited low frequencies in all the samples. In addition, many droplets rich in C, N, O, and S were observed. They tended to be small, exhibiting a dark round shape on SEI, and generally included 8–20 at.% C, 0–12 at.% N, 60–80 at.% O, and 4–10 at.% S (sometimes with <3 at.% Mg and Na). They were attributed to be a mixture of carbonaceous matter, H₂SO₄, and NH₄HSO₄/(NH₄)₂SO₄, mostly from the reaction of atmospheric SO₂ with NH₃ under high relative humidity. The analysis of the relationship between the aerosol particle compositions and 72-h backward air-mass trajectories suggests that ambient aerosols at Tokchok Island are strongly affected not only by seawater from the Yellow Sea but also by anthropogenic pollutants emitted from China and the Seoul–Incheon metropolis, resulting in the dominance of complex secondary aerosol particles.     

Maternal and cord serum exposure to PCB and DDE methyl sulfone metabolites in eastern Slovakia

Polychlorinated biphenyls (PCBs) were commercially produced between 1959 and 1984 in eastern Slovakia. Improper handling led to a highly contaminated local environment and high levels of PCBs in humans and wildlife in the Michalovce area. The aim of this study was to analyse serum for methylsulfonyl metabolites of PCB (MeSO(2)-PCBs) and DDE (3-MeSO(2)-DDE) in serum samples from pregnant women and in a selected number of paired cord blood samples to assess maternal sulfone levels and patterns, and transplacental transfer of these metabolites. The donating women were from two districts in eastern Slovakia. A liquid-liquid extraction method together with separation of substance groups and further clean-up on silica gel columns were applied prior to analysis by gas chromatography/mass spectrometry. 3-MeSO(2)-DDE was the major methyl sulfone in most of the samples followed by a yet not identified MeSO(2)-hexaCB, 4'-MeSO(2)-CB101, 4'-MeSO(2)-CB87 and 4-MeSO(2)-CB149. The women from the contaminated area had three times higher concentrations of the MeSO(2)-PCBs than women from the reference area. This is the first report on methyl sulfone metabolites of PCB and DDE in human cord serum. It is shown that these metabolites are transported through the placenta. The levels of MeSO(2)-PCBs in the maternal serum were about 1.5 times higher than in the corresponding cord serum on a lipid weight basis. For 3-MeSO(2)-DDE, the levels were about the same in maternal and cord serum. The difference in the maternal:cord ratio, comparing MeSO(2)-PCBs with 3-MeSO(2)-DDE might be due to differences in transport through the placenta caused by their different affinities for lipoproteins and plasma proteins.