Alginate beads containing water treatment residuals for arsenic removal from water—formation and adsorption studies

Water treatment residuals (WTRs) produced in large quantities during deironing and demanganization of infiltration water, due to high content of iron and manganese oxides, exhibit excellent sorptive properties toward arsenate and arsenite. Nonetheless, since they consist of microparticles, their practical use as an adsorbent is limited by difficulties with separation from treated solutions. The aim of this study was entrapment of chemically pretreated WTR into calcium alginate polymer and examination of sorptive properties of the obtained composite sorbent toward As(III) and As(V). Different products were formed varying in WTR content as well as in density of alginate matrix. In order to determine the key parameters of the adsorption process, both equilibrium and kinetic studies were conducted. The best properties were exhibited by a sorbent containing 5 % residuals, formed in alginate solution with a concentration of 1 %. In slightly acidic conditions (pH 4.5), its maximum sorption capacity was 3.4 and 2.9 mg g^?1 for As(III) and As(V), respectively. At neutral pH, the adsorption effectiveness decreased to 3.3 mg As g^?1 for arsenites and to 0.7 mg As g^?1 for arsenates. The presence of carboxylic groups in polymer chains impeded in neutral conditions the diffusion of anions into sorbent beads; therefore, the main rate-limiting step of the adsorption, mainly in the case of arsenates, was intraparticle diffusion. The optimal condition for simultaneous removal of arsenates and arsenites from water by means of the obtained composite sorbent is slightly acidic pH, ensuring similar adsorption effectiveness for both arsenic species.     

Modelling future soil chemistry at a highly polluted forest site at Istebna in Southern Poland using the "SAFE" model

The multi-layer dynamic model SAFE was applied to the forested catchment Istebna (Southern Poland), to study recovery from acidification. Environmental pollution in the area has been historically high. The model uses data from an intensive monitoring plot established in 1999 in a spruce stand, which was planted in 1880. Observations showed that the soil was depleted of base cations. The measured base saturation in 1999 was between 5 and 8% in the different soil layers. Model predictions assuming full implementation of the UNECE 1999 Gothenburg Protocol and present day base cation deposition show that the base saturation will slowly increase to 20% by 2100. Despite large emission reductions, Istebna still suffers from the very high loads of acidifying input during the past decades. Soil recovery depends on future emissions especially on base cation deposition. The recovery will be even slower if the base cation deposition decreases further.     

Heavy metals in zooplankton from the Southern Baltic

Samples of zooplankton and suspended matter were collected using a Bongo net (0.33/0.50 mm mesh net), and Nucleopore filters, respectively, from the Southern Baltic off Poland. Major classes of zooplankton, and selected heavy metals (Fe, Co, Ni, Mn, Pb, Cd, Cu, Zn, Cr) were determined in the collected samples. Concentrations of heavy metals in zooplankton were corrected for metals contributed by particulate matter adhering to zooplankton organisms. Heavy metals levels measured in nearshore samples (Bay of Gdańsk, Pomeranian Bay) were higher than those in the samples from the open sea. The only exception was cadmium exhibiting larger concentrations in the offshore as compared to the nearshore samples (0.8 vs. 1.3 microg/g d.w.). This was attributed to decreased concentrations, of both dissolved and particulate cadmium, caused by algal bloom. Larger concentrations of heavy metals in the Bay of Gdańsk in comparison with the Pomeranian Bay (e.g. Cd-1.3 vs. 0.8 microg/g, Cu-20.5 vs. 8.3 microg/g, Pb-12.9 vs. 1.2 microg/g, Cr-12.4 vs. 1.4 microg/g) were attributed to the direct discharge of the Vistula river to the Bay of Gdańsk, while the Pomeranian Bay receives the Odra river runoff indirectly, via the Szczecin Lagoon. The nonlinear estimation of the data set was used to evaluate concentrations of heavy metals in Copepoda and Cladocera. Copepoda proved to be enriched with heavy metals in comparison with Cladocera.     

Relationship between volatile organohalogen compounds in drinking water and human urine in Poland

Selected volatile organohalogen compounds (VOX) were investigated in urine samples from people living in different areas of the Gdańsk-Sopot-Gdynia TriCity (Poland). The analytes were isolated and preconcentrated using the so-called thin layer headspace technique with autogenous generation of the liquid sorbent. Final gas chromatographic determination was carried out by direct aqueous injection with electron capture detection. Analyte concentrations in drinking water ranged from not detected to approximately 8 microg/l (chloroform), depending on the source of drinking water in a given part of the TriCity (underground, surface or mixed). The corresponding urine levels were typically lower by about an order of magnitude. VOX levels in urine of people living in the parts of the TriCity supplied with drinking water containing elevated levels of the analytes were higher than the levels in urine of people whose drinking water originated from deep underground wells. The linear correlation coefficients for the relationships between total VOX and chloroform levels in drinking water and in urine were r2=0.65 and 0.88, respectively. The fraction of VOX excreted with urine in unchanged form did not exceed 20%.     

Simultaneous removal of NOx,SO2, and Hg from flue gas in FGD absorber with oxidant injection (NaClO2)– full-scale investigation

ABSTRACT

This article presents the results of an industrial-scale study (on 400 MW_e lignite fired unit) of simultaneous NO_x, SO₂, and Hg^T removal in FGD absorber with oxidant injection (NaClO₂) into flue gas. It was confirmed that the injection of sodium chlorite upstream the FGD (Flue Gas Desulfurization) absorber oxidize NO to NO₂, Hg⁰ to Hg²⁺, and enhancing NO_x and Hg^T removal efficiency from exhaust gas in FGD absorber. Mercury removal efficiency grows with the rise of degree of oxidation NO to NO₂ and was limited by the phenomenon of re-emission. For NO_x removal the most critical parameters is slurry pH and temperature. There was no negative effect on sulfur dioxide removal efficiency caused by oxidant injection in tested FGD absorber. Based on the data provided, NO_x and Hg^T emissions can be reduced by adjusting the FGD absorber operating parameters combined with oxidant injection.     

Impact assessment of climate policy on Poland's power sector

This article addresses the impact of the European Union Emissions Trading System (EU ETS) on Poland’s conventional energy sector in 2008–2020 and further till 2050. Poland is a country with over 80% dependence on coal in the power sector being under political pressure of the European Union’s (EU) ambitious climate policy. The impact of the increase of the European Emission Allowance (EUA) price on fossil fuel power sector has been modelled for different scenarios. The innovation of this article consists in proposing a methodology of estimation actual costs and benefits of power stations in a country with a heavily coal-dependent power sector in the process of transition to a low-carbon economy. Strong political and economic interdependence of coal and power sector has been demonstrated as well as the impact caused by the EU ETS participation in different technology groups of power plants. It has been shown that gas-fuelled combined heat and power units are less vulnerable to the EU ETS-related costs, whereas the hard coal-fired plants may lose their profitability soon after 2020. Lignite power plants, despite their high emissivity, may longer remain in operation owing to low operational costs. Additionally, the results of long-term, up to 2050, modelling of Poland’s energy sector supported an unavoidable need of deep decarbonisation of the power sector to meet the post-Paris climate objectives. It has been concluded that investing in coal-based power capacity may lead to a carbon lock-in of the power sector. Finally, the overall costs of such a transformation have been discussed and confronted with the financial support offered by the EU. The whole consideration has been made in a wide context of changes ongoing globally in energy markets and compared with some other countries seeking transformation paths from coal. Poland’s case can serve as a lesson for all countries trying to reduce coal dependence in power generation. Reforms in the energy sector shall from the very beginning be an essential part of a sustainable transition of the whole nation’s economy. They must scale the power capacity to the future demand avoiding stranded costs. The reforms must be wide-ranging, based on a wide political consensus and not biased against the coal sector. Future energy mix and corresponding technologies shall be carefully designed, matched and should remain stable in the long-term perspective. Coal-based power capacity being near the end of its lifetime provides an economically viable option to commence a fuel switch and the following technology replacement. Real benefits and costs of the energy transition shall be fairly allocated to all stakeholders and communicated to the society. The social costs and implications in coal-dependent regions may be high, especially in the short-term perspective, but then the transformation will bring profits to the whole society.     

Analysis of occupational accidents: prevention through the use of additional technical safety measures for machinery

This article presents an analysis of results of 1035 serious and 341 minor accidents recorded by Poland's National Labour Inspectorate (PIP) in 2005–2011, in view of their prevention by means of additional safety measures applied by machinery users. Since the analysis aimed at formulating principles for the application of technical safety measures, the analysed accidents should bear additional attributes: the type of machine operation, technical safety measures and the type of events causing injuries. The analysis proved that the executed tasks and injury-causing events were closely connected and there was a relation between casualty events and technical safety measures. In the case of tasks consisting of manual feeding and collecting materials, the injuries usually occur because of the rotating motion of tools or crushing due to a closing motion. Numerous accidents also happened in the course of supporting actions, like removing pollutants, correcting material position, cleaning, etc.     

Allometric scaling and accidents at work

Allometry is the knowledge concerning relations between the features of some beings, like animals, or cities. For example, the daily energy rate is proportional to a mass of mammals rise of 3/4. This way of thinking has spread quickly from biology to many areas of research concerned with sociotechnical systems. It was revealed that the number of innovations, patents or heavy crimes rises as social interaction increases in a bigger city, while other urban indexes such as suicides decrease with social interaction. Enterprise is also a sociotechnical system, where social interaction and accidents at work take place. Therefore, do these interactions increase the number of accidents at work or, on the contrary, are they reduction-driving components? This article tries to catch such links and assess the allometric exponent between the number of accidents at work and the number of employees in an enterprise.