Use of recycling stations in Borlänge, Sweden--volume weights and attitudes

This paper presents a study of recycling stations in the municipality of Borl?nge, Sweden. The main objectives were to measure volume weights of recyclables, to facilitate future planning of collection intervals and bin/container volume, and to investigate the general attitudes among the public towards waste management in general and recycling stations in particular. Volume weights measured in bins/containers were: paper/newsprint: 297 kg/m3, glass packaging: 297 kg/m3, metal packaging: 81.7 kg/m3, paper packaging: 27.8 kg/m3, plastic packaging: 28.1 kg/m3. The recycling stations have been in use since 1994. Most visitors (90%) arrived by car but said the visit to the recycling station was not the main purpose of the trip. The results from the interviews indicated that the people who use the recycling stations have found ways to incorporate waste sorting into their everyday lives, with the help of information, design of the collection system and environmental concerns.     

Participatory Development of No-tillage Systems without Herbicides for Family Farming: The Experience of the Center-South Region of Paraná

It is currently estimated that 40 million hectares worldwide are cultivated through no-tillage systems (Derpsh, 1998). Small family farms account for less than 50,000ha, half of them located in South America's Southern Cone (Wall, 1998). Many hypotheses have been offered to explain why so few small farmers have adapted to this method. The most simplistic ones relate this limited adoption to small farmers' traditionalism and to their rejection of innovation. Others point to the low technological development of animal-drawn equipment needed for this technology or the low educational level of family farmers.Results of work done in the Center-South of Paraná, Southern Brazil, by AS-PTA¹ in partnership with the region's Forum of Family Farmers Organizations, challenge these hypotheses and draw attention to the need for new approaches and processes of research and extension if the goal is to disseminate and implement appropriate no-tillage systems among family farmers. One requisite is to lower production costs of this method through elimination of herbicides and using green manure and cover crops that shift the crop-weed balance in favor of crops.     

Small–scale mining in South Africa: Past, present and future

Mining is an important part of the South African economy and has been the driver of much of the economic development of the country. However, the small–scale mining subsector still has to realise its full potential. A small–scale mine has been defined as a mining activity employing less than 50 people and with an annual turnover of less than 7.5 million Rand and includes artisanal mines. Small–scale miners are involved in many commodities but there appears to be a bias towards gold, diamonds and quarrying for construction materials, including brickclays. Small–scale mining is regulated by the same legislation (i.e., for the environment, labour, mineral rights, exploration and mining permitting, and skills development) as large–scale mining, though compliance is low, particularly where artisanal mining in concerned. The effective participation of small–scale miners in the mining sector is hampered by their lack of skills, i.e., technical, business and management, and their limited access to mineral deposits, capital and markets. Some of these hindrances have been inherited from the imbalances of the colonial and apartheid eras and continue to act as barriers, making entrance to the industry difficult. For those who have entered the industry out of desperation, as is the case with most artisanal miners, their activities result in negative impacts evident in the inefficient, unsafe and environmentally unfriendly operations. With the advent of the new political dispensation in South Africa, a new era is dawning for the country’s small–scale mining subsector. This has resulted in a change of attitude and new government policies which have led to special programmes being put in place to promote the subsector. Intervention strategies for the support of small–scale mining (some of which are already in operation) include programmes for kickstarting mineral beneficiation and value–addition projects, development of appropriate technologies and skills and technology transfer. Proponents of small–scale mining see a well–regulated industry as being the cornerstone of future rural economic development, particularly for previously disadvantaged communities in the poverty nodes.     

Heuristics as adaptive decision strategies in management

In the management literature, heuristics are often conceived of as a source of systematic error, whereas logic and statistics are regarded as the sine qua non of good decision making. Yet, this view can be incorrect for decisions made under uncertainty, as opposed to risk. Research on fast and frugal heuristics shows that simple heuristics can be successful in complex, uncertain environments and also when and why this is the case. This article describes the conceptual framework of heuristics as adaptive decision strategies and connects it with the managerial literature. We review five classes of heuristics, analyze their common building blocks, and show how these are applied in managerial decision making. We conclude by highlighting some prominent opportunities for future research in the field. In the uncertain world of management, simple heuristics can lead to better and faster decisions than complex statistical procedures. Copyright © 2014 John Wiley & Sons, Ltd.     

Effects of environmental exposure and diet on levels of persistent organic pollutants (POPs) in eggs of a top predator in the North Atlantic in 1980 and 2008

Concentrations of POPs in Great skua eggs from Shetland are among the highest in North Atlantic seabirds, with up to 11,600 μg/kg (ww) DDE and up to 17,900 μg/kg ww ∑PCB. Concentrations of legacy POPs were significantly lower in 2008 than 1980. Decreases were greatest for least persistent compounds. Median ∑PBDEs increased from 99 μg/kg ww in 1980 to 173 μg/kg ww in 2008. There were changes in Great skua breeding season diet, with more adult Herring and Mackerel and less Sandeel. These changes increase exposure to POPs, since Herring and Mackerel accumulate more POPs than Sandeels. In both years, eggs with higher δ¹⁵N had higher POP concentrations. In 1980, birds feeding more on demersal discard fish from trawl fisheries and less on Sandeels, had higher POP levels in eggs. In 2008, individuals feeding more on Herring and Mackerel, and less on discards, had higher POP levels in eggs.     

WEEE and portable batteries in residual household waste: Quantification and characterisation of misplaced waste

A total of 26.1 Mg of residual waste from 3129 households in 12 Danish municipalities was analysed and revealed that 89.6 kg of Waste Electrical and Electronic Equipment (WEEE), 11 kg of batteries, 2.2 kg of toners and 16 kg of cables had been wrongfully discarded. This corresponds to a Danish household discarding 29 g of WEEE (7 items per year), 4 g of batteries (9 batteries per year), 1 g of toners and 7 g of unidentifiable cables on average per week, constituting 0.34% (w/w), 0.04% (w/w), 0.01% (w/w) and 0.09% (w/w), respectively, of residual waste. The study also found that misplaced WEEE and batteries in the residual waste constituted 16% and 39%, respectively, of what is being collected properly through the dedicated special waste collection schemes. This shows that a large amount of batteries are being discarded with the residual waste, whereas WEEE seems to be collected relatively successfully through the dedicated special waste collection schemes. Characterisation of the misplaced batteries showed that 20% (w/w) of the discarded batteries were discarded as part of WEEE (built-in). Primarily alkaline batteries, carbon zinc batteries and alkaline button cell batteries were found to be discarded with the residual household waste. Characterisation of WEEE showed that primarily small WEEE (WEEE directive categories 2, 5a, 6, 7 and 9) and light sources (WEEE directive category 5b) were misplaced. Electric tooth brushes, watches, clocks, headphones, flashlights, bicycle lights, and cables were items most frequently found. It is recommended that these findings are taken into account when designing new or improving existing special waste collection schemes. Improving the collection of WEEE is also recommended as one way to also improve the collection of batteries due to the large fraction of batteries found as built-in. The findings in this study were comparable to other western European studies, suggesting that the recommendations made in this study could apply to other western European countries as well.     

Feature Extraction Techniques for Measuring Piñon and Juniper Tree Cover and Density,and Comparison with Field-Based Management Surveys

Western North America is experiencing a dramatic expansion of piñon (Pinus spp.) and juniper (Juniperus spp.) (P-J) trees into shrub-steppe communities. Feature extracted data acquired from remotely sensed imagery can help managers rapidly and accurately assess this land cover change in order to manage rangeland ecosystems at a landscape-scale. The objectives of this study were to: (1) develop an effective and efficient method for accurately quantifying P-J tree canopy cover and density directly from high resolution photographs and (2) compare feature-extracted data to typical in-situ datasets used by land managers. Tree cover was extracted from aerial-photography using Feature Analyst^®. Tree density was calculated as the sum of the total number of individual polygons (trees) within the tree cover output file after isolation using a negative buffer post-processing technique. Feature-extracted data were compared to ground reference measurements from Utah’s Division of Wildlife Resources Range Trend Project (DWR-RTP). We found that the proposed feature-extraction techniques used for measuring cover and density were highly correlated to ground reference and DWR-RTP datasets. Feature-extracted measurements of cover generally showed a near 1:1 relationship to these data, while tree density was underestimated; however, after calibration for juvenile trees, a near 1:1 relationship was realized. Feature-extraction techniques used in this study provide an efficient method for assessing important rangeland indicators, including: density, cover, and extent of P-J tree encroachment. Correlations found between field and feature-extracted data provide evidence to support extrapolation between the two approaches when assessing woodland encroachment.     

Knowledge co‐production and boundary work to promote implementation of conservation plans

Knowledge co‐production and boundary work offer planners a new frame for critically designing a social process that fosters collaborative implementation of resulting plans. Knowledge co‐production involves stakeholders from diverse knowledge systems working iteratively toward common vision and action. Boundary work is a means of creating permeable knowledge boundaries that satisfy the needs of multiple social groups while guarding the functional integrity of contributing knowledge systems. Resulting products are boundary objects of mutual interest that maintain coherence across all knowledge boundaries. We examined how knowledge co‐production and boundary work can bridge the gap between planning and implementation and promote cross‐sectoral cooperation. We applied these concepts to well‐established stages in regional conservation planning within a national scale conservation planning project aimed at identifying areas for conserving rivers and wetlands of South Africa and developing an institutional environment for promoting their conservation. Knowledge co‐production occurred iteratively over 4 years in interactive stake‐holder workshops that included co‐development of national freshwater conservation goals and spatial data on freshwater biodiversity and local conservation feasibility; translation of goals into quantitative inputs that were used in Marxan to select draft priority conservation areas; review of draft priority areas; and packaging of resulting map products into an atlas and implementation manual to promote application of the priority area maps in 37 different decision‐making contexts. Knowledge co‐production stimulated dialogue and negotiation and built capacity for multi‐scale implementation beyond the project. The resulting maps and information integrated diverse knowledge types of over 450 stakeholders and represented >1000 years of collective experience. The maps provided a consistent national source of information on priority conservation areas for rivers and wetlands and have been applied in 25 of the 37 use contexts since their launch just over 3 years ago. When framed as a knowledge co‐production process supported by boundary work, regional conservation plans can be developed into valuable boundary objects that offer a tangible tool for multi‐agency cooperation around conservation. Our work provides practical guidance for promoting uptake of conservation science and contributes to an evidence base on how conservation efforts can be improved.     

Analytical solutions for multiple species reactive transport in multiple dimensions

Many numerical computer codes used to simulate multi-species reactive transport and biodegradation have been developed in recent years. Such numerical codes must be validated by comparison of the numerical solutions with an analytical solution. In this paper, a method for deriving analytical solutions of the partial differential equations describing multiple species multi-dimensional transport with first-order sequential reactions is presented. Although others have developed specific solutions of multi-species transport equations, here a more general analytical approach, capable of describing any number of reactive species in multiple dimensions is derived. A substitution method is used to transform the multi-species reactive transport problem to one that can be solved using previously published single-species solutions for various initial and boundary conditions. One- and three-dimensional examples are presented to illustrate the steps involved in extending single-species solutions to a four-species system with sequential first-order reactions.