Temporal changes of 7Be, 137Cs and 210Pb activity concentrations in surface air at Monaco and their correlation with meteorological parameters

Results of analysis of ⁷Be, ¹³⁷Cs and ²¹⁰Pb on aerosol filters carried out from 1998 to 2010 in Monaco show that a weak correlation between activity concentrations of these radionuclides in the atmosphere and meteorological parameters has been found for ⁷Be and temperature (r = 0.50), ²¹⁰Pb and temperature and humidity (r = 0.43 and 0.41, respectively), and ¹³⁷Cs and precipitation (r = 0.51). The minimum and maximum ⁷Be activity concentrations were observed during 2000 and 2009, corresponding with the maximum and minimum solar activity, respectively. The maximum ¹³⁷Cs activity concentration found in May-June 1998 was due to the accident at Algeciras in Spain. The deposition velocities of ⁷Be, ¹³⁷Cs and ²¹⁰Pb depended on the precipitation rate, and attained maximum values during dry seasons. The investigated radionuclides may be used as atmospheric tracers, especially in long-term periods.     

Antibiotic contaminants in coastal wetlands from Vietnamese shrimp farming

Background and purpose  

Shrimp culture has been expanded rapidly in recent years in coastal wetland zone of Vietnam due to favorable natural conditions. However, this industry has caused several negative impacts to the environment. One of the critical issues is the excessive application of antibiotics including human medicines. These chemicals could be released from shrimp ponds and then accumulated and contaminated of the ecosystem. This review article discusses a whole range of findings that address various aspects of the usage, occurrence and potentially environmental risks of antibiotics released from shrimp farming, with emphasis on the South Vietnam coastal wetland.     

Designing ambient particulate matter monitoring program for source apportionment study by receptor modeling

Particulate matter (PM) receptor modeling requires specific intensive input data that is always a challenge to produce cost effectively. A well-designed monitoring program is important to collect such PM ambient data in urban areas with diverse and densely distributed sources. This paper presents a general framework for designing such a monitoring program while emphasizing appropriate quality assurance and quality control elements that are particularly applicable where limited resources are available. Topics for discussion include selection of monitoring sites, sampling and analytical techniques, and the uncertainty estimation for ambient concentration input data. The design framework is illustrated by a case study of a monitoring program for PM source apportionment in the Bangkok Metropolitan Region in which 24-h fine and coarse PM samples were collected using two collocated dichotomous samplers. Comparison between black carbon measurements by Smoke Stain reflectometry and Thermal Optical Transmittance method is highlighted.     

Toxicity of imidazolium salt with anion bromide to a phytoplankton Selenastrum capricornutum: effect of alkyl-chain length

Room-temperature ionic liquids are regarded as environmentally benign alternatives to volatile organic solvents. However, the product designs for this promising group of compounds should take account, not only the technological needs, but also the eco-toxicological hazards. Therefore, this study aimed to evaluate the toxicity of some important ionic liquids on the growth of the freshwater alga, Selenastrum capricornutum. The ionic liquids examined in this study included 1-propyl-3-methylimidazolium [PMIM], 1-butyl-3-methylimidazolium [BMIM], 1-hexyl-3-methylimidazolium [HMIM] and 1-octyl-3-methylimidazolium [OMIM] with a bromide anion. The susceptibility of alga to ionic liquids was strongly dependent on the alkyl-chain length. According to our results, a longer alkyl-chain resulted in stronger inhibition of algal growth. In general, the toxicity could be summarized as decreasing in the following order: [OMIM]>[HMIM]>[BMIM]>or=[PMIM]. Among the ionic liquids examined, [OMIM] [Br] was found to be most toxic to S. capricornutum, with EC(50) values ranging from 26.3 microM to 54.9 microM after an incubating time of 96 h. Although [BMIM] [Br] and [PMIM] [Br] was relatively less toxic than [OMIM] and [HMIM], their toxicity increased as increasing the incubation time from 48 h to 96 h. This fact indicates that these kinds of ionic liquids may become more toxic after being released and contacted to freshwater ecosystem.     

Optimizing the performance of phase-change materials in personal protective clothing systems.

Phase-change materials (PCM) can be used to reduce thermal stress and improve thermal comfort for workers wearing protective clothing. The aim of this study was to investigate the effect of PCM in protective clothing used in simulated work situations. We hypothesized that it would be possible to optimize cooling performance with a design that focuses on careful positioning of PCM, minimizing total insulation and facilitating moisture transport. Thermal stress and thermal comfort were estimated through measurement of body heat production, body temperatures, sweat production, relative humidity in clothing and subjective ratings of thermal comfort, thermal sensitivity and perception of wetness. Experiments were carried out using 2 types of PCM, the crystalline dehydrate of sodium sulphate and microcapsules in fabrics. The results of 1 field and 2 laboratory experimental series were conclusive in that reduced thermal stress and improved thermal comfort were related to the amount and distribution of PCM, reduced sweat production and adequate transport of moisture.     

Arsenic in groundwater and sediment in the Mekong River delta, Vietnam

A study of groundwater and sediment during 2007-2008 in the Mekong River delta in Vietnam (MDVN) revealed that 26%, 74%, and 50% of groundwater samples were above the US EPA drinking water guidelines for As (10 μg/L), Mn (0.05 mg/L), and Fe (0.3 mg/L). The range of As, Fe, and Mn concentrations in the MDVN were <0.1-1351 μg/L, <0.01-38 mg/L, and <0.01−14 mg/L, respectively. Elevated levels of As were found in groundwater at sampling sites close to the Mekong River and in wells less than 60−70 m deep. An inverse relationship was found between As and Mn concentrations in groundwater. Sediment samples from An Giang and Dong Thap had the highest As concentrations (18 mg/kg and 38 mg/kg, respectively). Arsenic sediment occurred mainly in the poorly crystalline Fe oxide phases. Reductive dissolution of the Fe oxide phase is not necessarily the dominant mechanism of As release to groundwater.     

Sustainability indicators for clean development mechanism projects in Vietnam

The Clean Development Mechanism (CDM) is one of the flexible instruments of the Kyoto Protocol designed to combat climate change so as to bring advantages to developing countries and developed countries alike. Indeed, CDM projects have a two-fold objective: to offset greenhouse gas emissions and to contribute to sustainable development in the host country. However in many cases, the latter objective appears to be marginalized. This is at least partly due to the difficulties surrounding the definition and the measurement of sustainability, in particular in a developing country context. To assess CDM projects’ contribution to sustainable development in the host country, scholars and practitioners need adapted indicator sets. A set of indicators were developed by way of an iterative Delphi approach amongst selected Vietnamese experts. The Delphi approach allowed a systematic collection of the experts’ judgements on the sustainability indicators through a set of sequentially applied questionnaires, interspersed with feedback from earlier responses. This exercise resulted in the selection of a set of 36 indicators, which emphasise economic efficiency, public health and pollution issues. The exercise yielded a locally supported and context-specific set of sustainability indicators that will allow Vietnamese decision-makers to enhance the sustainability of the approved CDM projects. In the future this set should be continually improved through real-life application and further participation from local stakeholders. This study is a first step in a long-term process towards developing an adapted toolkit for sustainability assessment of CDM projects in Vietnam.     

Mercury in air in an area impacted by strong industrial activities

The concentrations of total gaseous mercury (TGM) and its relevant environmental parameters were measured at a highly industrialized area in the Ban Wall industrial complex (BWIC) in An San city, Korea from March to May 2005. The mean concentrations of Hg measured during the entire study period were computed to be 6.32 ± 8.56 ng m⁻³ (range of 2.32–181 ng m⁻³; N = 1160). Due to the effects of strong man-made activities, the significantly high Hg concentration levels (e.g., at or above 10 ng m⁻³) comprised about 7.5% of all data with the mean of 21.8 ± 26.3 ng m⁻³ (N = 87). By separating the data into daytime and nighttime periods, the Hg values exhibited a notable daytime enhancement possibly due to strong man-made activities during working hours. The results of the correlation analysis indicated the possible relationship between the Hg concentration and the temperature as well as several pollutant species (e.g., NO₂ and NO_x). Evaluation of the Hg data in relation with the air mass transport pattern confirms that the Hg concentration levels in this industrial area are affected most eminently by local, rather than distant, pollution sources.     

Measuring the association of environmental,corporate, financial,and social CSR: evidence from fuzzy TOPSIS nexus in emerging economies

Environmental Science and Pollution Research - The purpose of this research is to measure the combing impact of corporate social responsibility on company performance and to conduct a comparative...     

A robust method for collecting and processing the on-road instantaneous data of fuel consumption and speed for motorcycles

ABSTRACT

Using the laboratory-based fuel consumption models for predicting real-world fuel consumption requires the measurement of data under certain conditions to obtain high accuracy of predicted result. Therefore, it is necessary to develop a logging device for measuring the real-time fuel consumption and speed of vehicle on the road. This article presents a study on developing the on-board data logging device to collect real-world data of fuel consumption and speed for motorcycles with the update rate of 1 Hz. The instantaneous speed of the motorcycle was determined based on the rotational speed of the wheel and the wheel radius. Another module was used to determine the instantaneous fuel consumption rate (FR) though measuring the duration injection pulse. The relationship between the duration injection pulse and the injected amount of fuel was established with high correlation coefficient of 0.997. In addition, a filter was designed to remove noise in the dataset collected using the data logging device. The random errors in the speed and the FR profiles were detected and replaced, the percentage of these errors is 1.8% and 2.4%, respectively. The developed method is a precise one for transient fuel consumption and speed measurement. In chassis dynamometer test, the average deviation between steady speed measured by the chassis and the data logging device is only approximately 0.35%. At transient state, the biggest deviation between these two datasets is less than 3.5%. The average FR at steady speed measured by the developed method is slightly different from the one measured by the carbon balance method. The difference is 0.9%, 2.5%, and 0.25% at the speeds of 30 km/h, 50 km/h, and 70 km/h, respectively. Following the transient test cycle, the fuel consumption measured by the developed method is 4.35% lower than that determined by the carbon balance method.

Implications: A robust method for collecting and processing the on-road instantaneous data of fuel consumption and speed was developed for motorcycles. The proposed method can record well the real-world driving data for motorcycles, including the fuel consumption and speed, with the update rate of 1 Hz. The filter was designed to minimize noise while maintaining data integrity of the collected dataset, the percentage of errors in the the speed and the FR profiles is 1.8% and 2.4%, respectively. The proposed method, therefore, can be used as effective tools for future studies relating to the fuel consumption and emission of motorcycles on the road.