Bioaerosol sampling by a personal rotating cup sampler CIP 10-M

High concentrations of bioaerosols containing bacterial, fungal and biotoxinic matter are encountered in many workplaces, e.g. solid waste treatment plants, waste water treatment plants and sewage networks. A personal bioaerosol sampler, the CIP 10-M (M-microbiologic), has been developed to measure worker exposure to airborne biological agents. This sampler is battery operated; it is light and easy to wear and offers full work shift autonomy. It can sample much higher concentrations than biological impactors and limits the mechanical stress on the microorganisms. Biological particles are collected in 2 ml of liquid medium inside a rotating cup fitted with radial vanes to maintain an air flow rate of 10 l min(-1) at a rotational speed of approximately 7,000 rpm. The rotating cup is made of sterilisable material. The sampled particles follow a helicoidal trajectory as they are pushed to the surface of the liquid by centrifugal force, which creates a thin vertical liquid layer. Sterile water or another collecting liquid can be used. Three particle size selectors allow health-related aerosol fractions to be sampled according to international conventions. The sampled microbiological particles can be easily recovered for counting, incubation or further biochemical analysis, e.g., for airborne endotoxins. Its physical sampling efficiency was laboratory tested and field trials were carried out in industrial waste management conditions. The results indicate satisfactory collection efficiency, whilst experimental application has demonstrated the usefulness of the CIP 10-M personal sampler for individual bioaerosol exposure monitoring.     

Cement/clay interactions-- a review: experiments, natural analogues, and modeling

The concept of storing radioactive waste in geological formations calls for large quantities of concrete that will be in contact with the clay material of the engineered barriers as well as with the geological formation. France, Switzerland and Belgium are studying the option of clayey geological formations. The clay and cement media have very contrasted chemistries that will interact and lead to a degradation of both types of material. The purpose of this review is to establish an exhaustive list of laboratory experiments so as to identify the reaction sequences in the evolution of both the clay minerals and accessory minerals during their alteration in an alkaline environment. We review the data on clay dissolution kinetics in this environment, and include an invaluable study of natural analogues that allow one to correlate the phenomena in time. The available data and experiments make it possible to construct predictive numerical models. However, as the quality of the data is inhomogeneous, we recommend a continuation of the thermodynamic and kinetic data acquisition. It is obvious that the numerical modeling of the alkaline disturbance will be more relevant if it can combine the advantages of the different detailed models: mineralogical completeness, combined modeling of the clay and cement media, evolution of the porosity, consideration of the pCO2 and all the surface reactions.     

Nitrogen removal in valley bottom wetlands: assessment in headwater catchments distributed throughout a large basin

Although the reduction of nutrient loading between uplands and streams is sometimes considered evidence of the effect of wetlands acting as buffer zones, the influence of valley bottom wetlands (VBWs) on NO(3)(-) loading has seldom been assessed at the catchment scale. The objective of this study was to quantify the impact of VBWs on NO(3)(-) concentrations in streams in the Brittany region of France. We analyzed the spatial variation in NO(3)-N concentrations in 18 headwater catchments located in a 400-km(2) basin, with varying topographic, climatic, and agricultural intensity conditions. Approximately every 10 d, water was sampled during the high flow season. We investigated the relationships between the mean NO(3)(-) concentration and different characteristics of the catchments: (i) the amount of effective rainfall, i.e., the combined effect of precipitation and actual evapotranspiration on discharge and chemical dilution, (ii) the intensity of farming, i.e., the area used for farming in the catchments and the surplus of the agricultural N budget, and (iii) the relative area of VBWs. Although the first two characteristics were the main factors controlling N concentration variability, a step-by-step regression allowed us to attribute a significant part of the NO(3)(-) concentration decrease to the increase of VBW area in each catchment. For an increase of VBW area from 11 to 16%, the NO(3)-N concentration decreased from 5.3 to 4.2 mg L(-1). Therefore in this basin, VBWs reduced the NO(3)(-) concentrations in streams with sources in agricultural fields by 30%. This work demonstrates the contribution of natural VBWs to NO(3)(-) removal at the catchment scale compared to other sources of variation, which is a current need for integrating water quality criteria into wetland management.     

Integrated spatial health assessment of yellow perch (Perca flavescens) populations from the St. Lawrence River (QC,Canada), part B: cellular and transcriptomic effects

Environmental Science and Pollution Research - Multi-biological level assessments have become great tools to evaluate the health of aquatic ecosystems. Using this approach, a complementary study...     

Study of the dispersion of VOCs emitted by a municipal solid waste landfill

The dispersion of VOCs emitted by a municipal solid waste landfill was studied for a period of over one year. Sixteen VOCs were monitored: linear alkanes from C₇ to C₁₁, BTEX, trimethylbenzene, trichlorethylene, tetrachlorethylene, α and β-pinenes, limonene. The analytical procedure was first comprised of static long-term sampling of about 2 months using radial diffusion Radiello tubes containing activated carbon, followed by extraction by solvent (i.e. CS₂) and GC/MS analysis. The results were initially analysed on the basis of the total concentration of the quantified VOCs, then by examining the concentrations of certain selected compounds. The influence of different parameters such as operating conditions, meteorological conditions and site morphology was highlighted on the basis of total VOC concentrations. In order to study the VOC's dispersion more closely, 5 compounds were chosen: toluene, benzene, limonene, and the sum trichlorethylene + tetrachlorethylene, as a “marker”, to verify the origin of the VOCs emitted. The results showed that the main source of VOCs is the open cell and lead to different hypotheses on interferences from neighbouring sources and to the proposal of solutions to limit the emission of VOCs and their dispersion. To our knowledge, this type of study has not been accomplished until this day.     

Levels and trends of HBCD and BDEs in the European and Asian environments, with some information for other BFRs

In this paper, we review recent data for brominated flame retardants (particularly BDEs, HBCD and TBBP-A) in samples from the European and Asian environments, including recent temporal trend studies. Research is active and we cite over 100 studies published during 2005-2007. Environmental compartments studied comprise the atmosphere, indoor and outdoor air, sewage sludges, soils and sediments and a variety of biological samples and food chains. Findings include that the lack of reference materials for use in analytical quality control and method validation identified earlier has been addressed, and certified concentrations are now available for a number of BDE congeners in six pre-existing and one new reference materials. BDE209 was certified in three samples of indoor dust. The analysis of BDE209 remains problematic, but suitable methods for its determination are available and need to be applied. The contamination of indoor environments with BFRs has been recognised as representing a significant uptake pathway, particularly via dust. Additional data for TBBP-A are needed from areas, where it is produced and used, primarily Asia, as the worst-case scenario. As a reactive flame retardant it is less likely to leach from finished products. Also, issues regarding the importance of e-waste recycling as a source of BFRs to the local populations and the local environment require urgent study, certainly in China and possibly elsewhere. Generally, trends show a levelling in concentrations of BDEs and increases in concentrations of HBCD wherever determined and BDE209 in Asia.     

Kinetic extractions to assess mobilization of Zn, Pb, Cu, and Cd in a metal-contaminated soil: EDTA vs. citrate

Kinetic EDTA and citrate extractions were used to mimic metal mobilization in a soil contaminated by metallurgical fallout. Modeling of metal removal rates vs. time distinguished two metal pools: readily labile (QM1) and less labile (QM2). In citrate extractions, total extractability (QM1+QM2) of Zn and Cd was proportionally higher than for Pb and Cu. Proportions of Pb and Cu extracted with EDTA were three times higher than when using citrate. We observed similar QM1/QM2 ratios for Zn and Cu regardless of the extractant, suggesting comparable binding energies to soil constituents. However, for Pb and Cd, more heterogeneous binding energies were hypothesized to explain different kinetic extraction behaviors. Proportions of citrate-labile metals were found consistent with their short-term, in-situ mobility assessed in the studied soil, i.e., metal amount released in the soil solution or extracted by cultivated plants. Kinetic EDTA extractions were hypothesized to be more predictive for long-term metal migration with depth.     

Degradation products of profenofos as identified by high-field FTICR mass spectrometry: Isotopic fine structure approach

This study was performed to identify the degradation products of profenofos “a phenyl organothiophosphate insecticide” in raw water (RW) collected from the entry point of Metropolitan Water Works Authority “Bangkaen, Thailand” and ultrapure water (UPW) with and without TiO₂ under simulated sunlight irradiation. Degradation of profenofos was followed with ultrahigh performance liquid chromatography (UHPLC) and follows pseudo first-order kinetic. Accordingly, high-field FTICR mass spectrometry coupled to an electrospray ionization source was used to reveal the degradation routes of profenofos and the isotopic fine structures (IFS) elucidations to approve the chemical structures of its degradation products. More degradation products were detected in UPW as compared to RW. Consequently, two main degradation pathways namely (i) interactive replacements of bromine and hydrogen by hydroxyl functional groups and (ii) rupture of PO, PS, CBr and CCl bonds were observed. None interactive replacement of chlorine by hydroxyl functional group was detected. Accordingly, mechanistical pathways of the main degradation products were established.     

Isovaleraldehyde elimination by UV/TiO2 photocatalysis: comparative study of the process at different reactors configurations and scales

A proposal for scaling-up the photocatalytic reactors is described and applied to the coated catalytic walls with a thin layer of titanium dioxide under the near ultraviolet (UV) irradiation. In this context, the photocatalytic degradation of isovaleraldehyde in gas phase is studied. In fact, the removal capacity is compared at different continuous reactors: a photocatalytic cylindrical reactor, planar reactor, and pilot unit. Results show that laboratory results can be useful for reactor design and scale-up. The flowrate increases lead to the removal capacity increases also. For example, with pilot unit, when flowrate extends four times, the degradation rate varies from 0.14 to 0.38 g h^?1 m_cat ^?2. The influence of UV intensity is also studied. When this parameter increases, zboth degradation rate and overall mineralization are enhanced. Moreover, the effects of inlet concentration, flowrate, geometries, and size of reactors on the removal capacity are also studied.