Valorization of EVA waste from footwear industry as natural aggregates substitutes in mortar: the effect of granulometry

Journal of Material Cycles and Waste Management - The increased consumption of polymers and the consequent generation of waste requires the development of efficient recycling strategies. In this...     

Optimization of "Serpa" cheese whey nanofiltration for effluent minimization and by-products recovery

Second cheese whey (SCW) is a by-product of cheese and curd cheese production that is usually not recovered and therefore substantially contributes to the negative environmental impact of the cheese manufacture plants. Membrane technology, namely nanofiltration (NF), is used in this work for the recovery of SCW organic nutrients, resulting from "Serpa" cheese and curd production. The SCW is processed by NF to recover a rich lactose fraction in the concentrate and a process water with a high salt content in the permeate. The permeation experiments were carried out in a plate & frame NF unit, where two NF membranes (NFT50 and HR-95-PP) were characterized and tested. The NF permeation experiments were performed accordingly with two different operation modes: total recirculation and concentration. In order to select the best membrane and operating pressure for the SCW fractionation, total recirculation experiments were carried out. The NF modeling was also performed, in terms of permeate fluxes and rejection coefficients using the resistances-in-series model and the solution-diffusion model, respectively. After the membrane selection, the concentration experiments showed that the selected membrane (NFT50) at 3.0MPa allows a water recovery of approximately 80%, concentrating the SCW nutrients approximately 5 times. Therefore, the NF operation can successfully reduce the wastewater organic load and simultaneously contributes to the valorization of the cheese and curd cheese manufacture by-products.     

Exploratory analysis in the evaluation of stress due to aluminum presence in Physalis angulata L. and multielement determination by microwave-induced plasma optical emission spectrometry (MIP OES)

Environmental Science and Pollution Research - The present work aimed to analyze the mineral nutrition of Physalis angulata L. under stress by aluminum in the nutrient solution. The treatments...     

Biocomplementation of SVE to achieve clean-up goals in soils contaminated with toluene and xylene

Soil vapor extraction (SVE) and bioremediation (BR) are two of the most common soil remediation technologies. Their application is widespread; however, both present limitations, namely related to the efficiencies of SVE on organic soils and to the remediation times of some BR processes. This work aimed to study the combination of these two technologies in order to verify the achievement of the legal clean-up goals in soil remediation projects involving seven different simulated soils separately contaminated with toluene and xylene. The remediations consisted of the application of SVE followed by biostimulation. The results show that the combination of these two technologies is effective and manages to achieve the clean-up goals imposed by the Spanish Legislation. Under the experimental conditions used in this work, SVE is sufficient for the remediation of soils, contaminated separately with toluene and xylene, with organic matter contents (OMC) below 4 %. In soils with higher OMC, the use of BR, as a complementary technology, and when the concentration of contaminant in the gas phase of the soil reaches values near 1 mg/L, allows the achievement of the clean-up goals. The OMC was a key parameter because it hindered SVE due to adsorption phenomena but enhanced the BR process because it acted as a microorganism and nutrient source.     

Biomonitoring spatial and temporal impact of atmospheric dust from a cement industry

The objective of this work was to evaluate the spatial and temporal impact of dust-pollution in the vicinity of a cement industry, located in an area with dry climate. The spatial impact integrated over time was evaluated from the concentrations of Ca, Fe and Mg in in-situ Xanthoria parietina. The temporal pattern was assessed through one-month transplants of the lichen Ramalina canariensis. Four potential sources of atmospheric dust were evaluated: the limestone-quarry; the unpaved roads, the deposit area and the cement mill. Calcium concentration in lichens was considered the best cement-dust indicator. Different types of dust (clinker and grinded-limestone-dust) resulted in different time-patterns of Ca accumulation, which was also related with the different influence that wet and dry periods have in the lichen accumulation process. The dust pollution was found to be deposited locally and dependent on: the nature of dust particles and the volume and frequency of precipitation.     

Impact of neighbourhood land-cover in epiphytic lichen diversity: analysis of multiple factors working at different spatial scales

The objective of this work was to determine the impact of neighbourhood land-cover in epiphytic lichen diversity. We used geostatistics to analyse the spatial structure of lichen-indicators (number of lichen species and Lichen Diversity Value) and correlate them to land-cover considering different distances from the observed data. The results showed that lichen diversity was influenced by different environmental factors that act in the same territory but impact lichens at different distances from the source. The differences in the distance of influence of the several land-cover types seem to be related to the size of pollutants/particles that predominantly are dispersed by each land-cover type. We also showed that a local scale of analysis gives a deeper insight into the understanding of lichen richness and abundance in the region. This work highlighted the importance of a multiple spatial scale of analysis to deeply interpret the relation between lichen diversity and the underling environmental factors.     

Renewable energy subsidies versus carbon capture and sequestration support

We propose an equilibrium model where final-goods production uses labor and energy, and energy production uses non-polluting Renewable Energy Sources (RES) and polluting fossil fuels. Our goal is to compare two alternative Green Tax Reforms (GTRs). In one of the GTRs, carbon tax revenues are used to support Carbon Capture and Sequestration (CCS) activities. In the other GTR, tax revenues are used to subsidize RES. The comparison between the two GTRs is focused on three indicators: output per worker, energy intensity and the ratio of renewables over non-renewables. Results show that, in theory, the GTR with the RES subsidy could benefit both the economy and the environment if resource substitution was strong enough. The GTR with CCS support necessarily decreases output since abatement only partially alleviates the tax burden. The empirical simulation indicates that, for most tax values, both GTRs imply an economic slowdown but benefit the environment. The GTR with RES subsidies appears to be preferable than the alternative one, especially for lower tax levels.     

Fast extraction of polychlorinated dibenzo-p-dioxin and polychlorinated dibenzofuran in sewage sludge and soil samples

The current environmental legislations recommend monitoring chemical contaminants such as polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans before the use of sewage sludge on the agricultural land. In this study, a solid–liquid extraction with low-temperature purification (SLE-LTP) was optimized and validated to determine 2,3,7,8-tetrachlorodibenzo-p-dioxin and 2,3,7,8-tetrachlorodibenzofuran in sewage sludge and soil samples. The analyses were performed by gas chromatography-mass spectrometry operating in the selective ion mode (GC-MS-SIM). Acetonitrile:ethyl acetate 6.5:1.5 (v/v) was the best extraction phase, and the recoveries percentages were close to 100%. The linearity was demonstrated in the range of 1.25–25 µg L^?1 of 1.25–20 µg L^?1 for sewage sludge and soil, respectively. Matrix effect was proved for the two compounds and in the two matrices studied. Extraction percentages were between 78 and 109% and relative standard deviations ≤ 19%. The proposed method is faster than methods described in the literature because showed a few steps. The quantification limits (LOQ) in sewage sludge were 6.4 and 32 ng TEQ kg^?1 for 2,3,7,8-TCDF and 2,3,7,8-TCDD, respectively. In soil, LOQs were 0.8 and 8.0 ng TEQ kg^?1 for 2,3,7,8-TCDF and 2,3,7,8-TCDD, respectively. These values are lower than the maximum residue limits established by European Legislation. The method was applied to 22 agricultural soil samples from different Brazilian cities and 2,3,7,8-TCDF was detected in one of these samples.     

Copper,zinc, and nickel recovery from printed circuit boards using an ammonia–ammonium sulphate system

Journal of Material Cycles and Waste Management - The ammoniacal leaching has been considered very selective for copper compared with other leaching systems; however, there are interactions with...     

Contaminant Retention Potential of Forested Filter Strips Established as SMZs in the Piedmont of Georgia1

Abstract: It is common practice in the United States and elsewhere to maintain vegetated filter strips adjacent to streams to retain contaminants in surface runoff. Most research has evaluated contaminant retention in managed agricultural field strips, while relatively few studies have quantified retention in forested filter strips, particularly for dissolved contaminants. Plot‐scale overland flow experiments were conducted to evaluate the efficiency of natural forested filter strips established as streamside management zones (SMZs) for retaining phosphorus (P), atrazine, and picloram transported in runoff. Retention was evaluated for five different slope classes: 1‐2, 5‐7, 10‐12, 15‐17, and 20‐22%; two cover conditions: undisturbed forest floor (O horizon intact) and forest floor removed by raking; and two periods with contrasting soil moisture conditions: summer‐dry and winter‐wet season. Surface flow was collected at 0, 2, 4, 6, and 10 m within the filter strip to evaluate changes in solution concentration as it moved through the O horizon and the surface soil horizon mixing zone. On average, a 10 m length of forested SMZ with an undisturbed forest floor reduced initial solution concentration of total dissolved P by 51%, orthophosphate P by 49%, atrazine by 28%, and picloram by 5%. Percentages of mass retention through infiltration of water plus concentration reductions in runoff were 64% for total dissolved P, 62% for orthophosphate P, 47% for atrazine, and 28% for picloram for undisturbed forest floor conditions. Lower retention occurred following forest floor removal, particularly for P. Average dissolved P retention was 16% lower following forest floor removal. For undisturbed sites, differences in retention were more closely related to forest floor depth than to slope or antecedent soil moisture. These results indicate that forested SMZ filter strips provide a significant measure of surface water protection from dissolved P and herbicide delivery to surface water.