Variations of arsenic species content in edible Boletus badius growing at polluted sites over four years

The content of arsenic (As) in mushrooms can vary depending on the concentration level of this metalloid in the soil/substrate. The present study evaluated the content of arsenic in Boletus badius fruiting bodies collected from polluted and non-polluted sites in relation to the content of this element in overgrown substrate. It was found that mushrooms from the arsenic-polluted sites contained mean concentrations from 49 to 450 mg As kg^?1 dry matter (d.m.), with the greatest content found for specimens growing in close proximity of sludge deposits (490±20 mg As kg^?1d.m.). The mean content of total arsenic in mushrooms from clean sites ranged from 0.03 to 0.37 mg kg^?1 It was found that B. badius could tolerate arsenic in soil substrate at concentrations of up to 2500 mg kg^?1, at least. In different years of investigation, shifts in particular arsenic forms, as well as a general increase in the accumulation of organic arsenic content, were observed. The results of this study clearly indicate that B. badius should not be collected for culinary purposes from any sites that may be affected by pollution.     

Ammoniacal leaching and recovery of copper from alloyed low-grade e-waste

The paper concerns a hydrometallurgical method for selective recovery of copper from low-grade electric and electronic wastes. The following consecutive stages were proposed: smelting of the scraps to produce Cu–Zn–Ag alloy, leaching of the alloy in ammoniacal solution, and selective copper electrowinning. Cu–Zn–Ag alloy was a polymetallic and five-phase system. It was leached in chloride, carbonate, sulfate and thiosulfate solutions. This resulted in the separation of the metals, wherein metallic tin and silver as well as lead salts remained in the slimes, while copper and zinc were transferred to the electrolyte. Copper was selectively recovered from the ammoniacal solutions by the electrolysis, leaving zinc ions in the electrolyte. The best conditions of the alloy treatment were obtained in the ammonia–carbonate system, where the final product was copper of high purity (99.9 %) at the current efficiency of 60 %. Thiosulfate solution was not applicable for the leaching of the copper alloy due to secondary reactions of the formation of copper(I) thiosulfate complexes and precipitation of copper(I) sulfide, both inhibiting dissolution of the metallic material.     

Sulfadimethoxine and sulfaguanidine: their sorption potential on natural soils

Sulfonamides (SAs) are one of the oldest groups of veterinary chemotherapeutic agents. As these compounds are not completely metabolized in animals, a high proportion of the native form is excreted in feces and urine. They are therefore released either directly to the environment in aquacultures and by grazing animals, or indirectly during the application of manure or slurry. Once released into the environment, SAs become distributed among various environmental compartments and may be transported to surface or ground waters. The physicochemical properties of SAs, dosage and nature of the matrix are the factors mainly responsible for their distribution in the natural environment. Although these rather polar compounds have been in use for over half a century, knowledge of their fate and behavior in soil ecosystems is still limited. Therefore, in this work we have determined the sorption potential of sulfadimethoxine and sulfaguanidine on various natural soils. The influence on sorption of external factors, such as ionic strength and pH, were also determined. The sorption coefficients (K_d) obtained for the sulfonamides investigated were quite low (from 0.20 to 381.17 mL g⁻¹ for sulfadimethoxine and from 0.39 to 35.09 mL g⁻¹ for sulfaguanidine), which indicated that these substances are highly mobile and have the potential to run off into surface waters and/or infiltrate ground water. Moreover, the sorption of these pharmaceuticals was found to be influenced by OC, soil solution pH and ionic strength, with higher K_d values for soils of higher OC and lower K_d values with increasing pH and ionic strength.     

Organic acid profile and phenolic and sugar content in Salix purpurea × viminalis L. cultivated with different spent mushroom substrate and copper additions

The aim of the study was to determine the response of Salix purpurea?×?viminalis L. growing on Pleurotus ostreatus spent mushroom substrate (SMS) with different copper (Cu) addition. The content of Cu in roots, leaves and shoots was reduced by SMS addition. A decrease of biomass was observed with simultaneous Cu concentration increase. SMS induced leaf and root elongation of Cu-treated plants. Variation in the profile of low molecular weight organic acids with the domination of oxalic and acetic acids was observed. The total phenolic content significantly increased for plants cultivated with SMS, while the biosynthesis of salicylic acid was considerably weakened. The content of sugars was generally reduced by SMS. Alteration in the level of the stress-related molecules suggests mitigation of the harmful effect of Cu on Salix hybrid metabolism by SMS addition. This pointed to the possibility of using SMS in contaminated soil to reduce the toxic effect of metals on plants used in phytoextraction.     

Sorption of ionic liquids onto soils: experimental and chemometric studies

Chemometric analyses are a great tool to support typical experimental studies of the interactions of xenobiotics with natural environment. Such interpretations are able to determine statistically significant correlations and finally lead to identification of the major sorption factors. However, to effectively use chemometrics a bigger data set is required. Even though the ionic liquids are intensively studied, their complete fate or prediction of their behavior in the natural environment is still unclear. Therefore, to evaluate and distinguish the patterns of interactions of ILs in soil environment by chemometrics, sorption of nine ionic liquids (imidazolium and pyridinium chlorides) on 11 types of various soils was tested. Experimental studies indicated that compounds with longer alkyl side chains were sorbed far more strongly than weakly lipophilic ones. Moreover, salts with short and/or hydroxylated derivatives were more mobile in soils/sediments and thus, might cause a danger of contamination of surface or ground waters. Cluster analysis revealed that ionic liquids form two major clusters according to interaction with soil surface - one grouping compounds with short and hydroxylated alkyl side chains and the second with the rest of compounds. Pairwise scatterplots for correlations between soil variables and sorption coefficients indicated that the main soil parameter responsible for the sorption was cation exchange capacity. Correlation of sorption coefficients, K(d), with pH indicated the existence of lower sorption potency in lower pH values.     

Institutional and environmental issues in land reclamation systems maintenance

The research reported here addresses the issues of institutional, social and land-use change with reference to land reclamation system maintenance in the Odra River Valley, SW Poland. Land reclamation systems are a network of different types of water control infrastructure and they require the collective maintenance effort of all users in order to fulfill drainage and irrigation functions properly. The example of decline in these systems in Polish rural areas brings together environmental and economic issues, as well as social dimensions of change from socialist top-down to democratic bottom-up decision-making and management. After 1989 the financing and management of land reclamation services by the State greatly decreased and a duty of LRS maintenance was actually transferred from government to individual land users. Farmers were not ready to take this responsibility and the whole system declined. The analysis presented in this article is a contribution to a better understanding of non-functioning land reclamation systems. Some recommendations for the future improvement of these systems are also provided.     

Concentration of heavy metals in hair and skin of silver and red foxes (Vulpes vulpes)

The structure of hair and levels of main chemical elements (C, N, O, S, Cl, Ca, P, Al, Na) in the external layer of hair of silver and red foxes (Vulpes vulpes) in a non-industrialised, typically agricultural region of middle-west Poland was assessed using a scanning microscope. Additionally, analysis of the accumulation of certain heavy metals (Cr, Cu, Ni, Pb and Zn) in hair (washed) and skin (non-tanned) of those foxes was conducted. Heavy metal levels were determined using a spectrophotometric method (ICP-OES), and correlations between these levels in hair and skin were calculated. The microscopic external (morphological) and internal structures (histological) of the hair of farm and wild foxes were not differentiated; however, the hair of farm foxes (external layer) contained higher amounts of C, Na, Al and P. A significantly higher Pb content was noted in non-tanned skin of wild foxes in comparison to farm ones. In the case of farm foxes, a significantly higher Zn content in hair and Zn and Cu in skin was observed in comparison to wild ones. Positive significant correlations between Cr and Ni content (r = 0.622) and Zn and Cu (r = 0.721) in fox skin were noted. A similar relationship between Cr content in hair and Ni in skin (r = 0.643) and between Zn in hair and skin (r = 0.595) was also observed.     

Differential shell strength of Cepaea nemoralis colour morphs—implications for their anti-predator defence

The Science of Nature - One of the most spectacular evolutionary forces is predation, evidenced to stimulate polymorphism in many prey species. Shell colour polymorphism of the land snail Cepaea...     

Utility of Gridded Rainfall for IHACRES Daily River Flow Predictions in Southern California Watersheds1

Abstract: Studies to regionalize conceptual hydrologic models generally require rainfall and river flow data from multiple watersheds. Besides the considerable time (cost) to assemble and process rainfall data for many watersheds, investigators often need to choose from a number of candidate gauges, subjectively weighing the relative importance of proximity and elevation to select a representative rainfall dataset. The Unified Raingauge Dataset (URD) is a gridded daily rainfall dataset that covers the conterminous United States at 0.25 × 0.25 degrees spatial resolution and is available from 1948 to present. The objective of this study was to determine whether uncertainty in daily river flow predictions using the conceptual hydrologic model IHACRES in small to moderate size watersheds (50‐400 km²) in southern California would increase if URD gridded rainfall data were used in place of single rain gauge data to calibrate the model. Rain gauge data were obtained from the gauge nearest the watershed centroid and the gauge closest in elevation to the watershed mean elevation. Results from 20 randomly selected watersheds indicated that IHACRES calibration performance was similar using rainfall data from the URD grids and rain gauge data. There was some evidence of greater uncertainties associated with the URD calibrations in areas where topography may affect rainfall amounts. In contrast to the URD data, monthly gridded data produced by the Parameter‐Elevation Regressions on Independent Slopes Model (PRISM) includes adjustments for elevation and produces gridded values at a finer spatial resolution (4 km²). A limited test on two watersheds demonstrated that scaling the URD daily rainfall estimates to match the PRISM monthly values may improve rainfall estimates and model simulation performance.     

Assessing river flood risk and adaptation in Europe—review of projections for the future

Flood damages have exhibited a rapid upward trend, both globally and in Europe, faster than population and economic growth. Hence, vigorous attempts of attribution of changes have been made. Flood risk and vulnerability tend to change over many areas, due to a range of climatic and nonclimatic impacts whose relative importance is site-specific. Flooding is a complex phenomenon and there are several generating mechanisms, among others intense and/or long-lasting precipitation, snowmelt, ice jam. Projected climate-driven changes in future flood frequency are complex, depending on the generating mechanism, e.g., increasing flood magnitudes where floods result of heavy rainfall and possibly decreasing magnitudes where floods are generated by spring snowmelt. Climate change is likely to cause an increase of the risk of riverine flooding across much of Europe. Projections of flood hazard in Europe based on climatic and hydrological models, reviewed in this paper, illustrate possible changes of recurrence of a 100-year flood (with probability of exceedance being 1-in-100 years) in Europe. What used to be a 100-year flood in the control period is projected to become either more frequent or less frequent in the future time horizon of concern. For a large part of the continent, large flooding is projected to become more commonplace in future, warmer climate. Due to the large uncertainty of climate projections, it is currently not possible to devise a scientifically-sound procedure for redefining design floods (e.g. 100-year flood) in order to adjust flood defenses. For the time being, we recommend to adjust design floods using a “climate change factor” approach.