Identification of polycyclic aromatic hydrocarbons in unleaded petrol and diesel exhaust emission

Inhalation of emissions from petrol and diesel exhaust particulates is associated with potentially severe biological effects. In the present study, polycyclic aromatic hydrocarbons (PAHs) were identified from smokes released by the automobile exhaust from petrol and diesel. Intensive sampling of unleaded petrol and diesel exhaust were done by using 800-cm³ motor car and 3,455-cm³ vehicle, respectively. The particulate phase of exhaust was collected on Whatman filter paper. Particulate matters were extracted from filter paper by using Soxhlet. PAHs were identified from particulate matter by reverse phase high performance liquid chromatography using C₁₈ column. A total of 14 PAHs were identified in petrol and 13 in case of diesel sample after comparing to standard samples for PAH estimation. These inhalable PAHs released from diesel and petrol exhaust are known to possess mutagenic and carcinogenic activity, which may present a potential risk for the health of inhabitants.     

Differential pulse adsorptive stripping voltammetric determination of simeton in its formulations and vegetables

A sensitive adsorptive stripping voltammetric method for the determination of simeton with universal buffer solution has been described. The method was based on the adsorption accumulation of simeton at a hanging mercury drop electrode. The overall reduction process is under controlled diffusion. The adsorptive peak was observed at ?0.8 V vs SCE in acidic solution 2 < pH < 6. The peak response was characterized with respect to pH, accumulation potential, time, and scan rate. The calibration plot was found to be linear from 1.13 × 10^???5 to 3.5 × 10^???8 M with a limit of detection of 2.0 × 10^???8 M. Finally, the method has been applied for the determination of simeton in its formulations and vegetable samples.     

Hydrochemical analysis to evaluate the seawater ingress in a small coral island of India

The sustainable development of the limited groundwater resources in the tropical island requires a thorough understanding of detail hydrogeological regime including the hydrochemical behavior of groundwater. Detail analysis of chemical data of groundwater helps in assessing the different groundwater zone affected by formation as well as sea water. Groundwater and saline water interaction is better understood using groundwater major ion chemistry over an island aquifer. Multivariate methods to analyze the geochemical data are used to understand geochemical evolution of groundwater. The methods are successfully used to group the data to evaluate influence of various environs in the study area. Various classification methods such as piper, correlation method, and salinity hazard measurements are also employed to critical study of geochemical characteristics of groundwater to identify vulnerable parts of the aquifer. These approaches have been used to successfully evaluate the aquifer zones of a tiny island off the west coast of India. The most part of island is found to be safe for drinking, however some parts of island are identified that are affected by sea water ingress and dissolution of formation minerals. The analysis has successfully leaded to identification of that part of aquifer on the island which needs immediate attention for restoration and avoids further deterioration.     

Abundance pattern of wedge clam Donax cuneatus (L.) in different spatial scale in the vicinity of a coastal nuclear power plant

Impact of thermal discharge from a coastal power station (Madras Atomic Power Station, southeast coast of India) on the spatial variability of Donax cuneatus abundance was assessed to determine the impact boundary. Totally, 20 sites were selected both on south and north side in increasing spatial scale from mixing zone, 12 locations were selected toward south side at a distance from 0 (near mixing point) to 2,000 m and eight location were selected toward north from the effluent mixing zone. Mean water temperature along the coast ranged from 29.1 ±0.15°C to 31.2 ± 0.15°C. Total organic carbon content in the sediment ranged from 0.27% to 0.70%. D. cuneatus population on the swash zone was ranged between 1.3 ± 1.5 and 88.3 ± 9.6 m^???2. Meager population of wedge clam was observed up to 100 m (S100) south from mixing point and abundance gradually increased in different spatial scale. Comparatively high abundance was observed from S400 and reached maximum at S1000 (64.0 ± 3.6 m^???2). Similar pattern was observed on north side too but less abundance was observed only up to 80 m (N80). Maximum abundance was observed at control location C3-N500 (88.3 ± 9.6 m^???2). Forty meters on either side of discharge point was highly impacted, 80 to 100 m toward plume flow (south) was moderately impacted, and 80 m north of mixing point also witnessed moderate impact. After 100 m (N100), north was not affected by effluents, whereas between 100 and 400 m, south was influenced slightly. Multivariate clustering pattern on the environmental variables of all sampling locations and population trend of D. cuneatus at those stations showed similarity. Present investigation unambiguously showed that the abundance pattern of D. cuneatus on the sandy beach of east coast of Kalpakkam is not governed by single major factor but due to the result of multiple interacting factors. The population size of the wedge clam with reference to the effect of power plant effluents and other features of habitats of the beach ecosystem are also discussed.     

Persistence and vertical distribution of termiticide fipronil in modified ground board test

Fipronil termiticide belongs to phenyl-pyrazole class of chemical compounds. It has broad-spectrum activity particularly against house hold pests such as cockroaches, mosquitoes, locusts, ticks, and fleas at both larval and adult stages. At high dosage it can be used to control subterranean termites in building foundations. To evaluate long term efficacy against termites the persistence and vertical distribution of fipronil was studied under natural weather conditions of Dehradun, India. Fipronil was applied at four concentrations i.e. 0.05, 0.1, 0.25 and 0.5% a.i ha⁻¹ by drenching 17 × 17 in.² plot prepared as per modified ground board test. Soil samples were collected after 22, 38 and 56 months of treatment up to the depth of 75 cm. The soil core was cut into five distinct sections i.e. 0–15, 15–30, 30–45, 45–60 and 60–75 cm depth. The residues were extracted by shaking 20 g soil sample with acetone. The acetone extract was concentrated and cleaned-up over florisil column. Fipronil residues were estimated on GLC at 220, 260, and 300°C oven, injector and detector temperature respectively. Fipronil was found to persist beyond 56 months after application. Two metabolites viz. desulfinyl and sulfide-fipronil were detected in sampling after 22 months of application that also dissipated with time. Fipronil residues were found up to 60 cm depth. The residues in deeper layers dissipate slowly with time and after 56 months of treatment residues were detected only up to 30 cm depth.     

Rapid immobilization of viable Bacillus pseudomycoides in polyvinyl alcohol/glutaraldehyde hydrogel for biological treatment of municipal wastewater

A new approach for easy synthesis of Bacillus pseudomycoides immobilized polyvinyl alcohol (PVA)/glutaraldehyde (GA) hydrogel for application in a wastewater treatment system is reported. Optimization studies revealed that GA/PVA mass ratio of 0.03 and acidic pH of 2 were required for hydrogel synthesis and eventually for bacterial cell immobilization. The synthesized crosslinked matrix possessed a pore size suitable for microbial cell entrapment while maintaining cell accessibility to external environment for bioremediation. Possible crosslinking and bacterial cell immobilization in the hydrogel were evidenced by FTIR, XRD, and SEM studies, respectively. Further, the extent of crosslinking of GA with PVA was investigated and confirmed by transmittance and permeability experiments. The viability and proliferation of hydrogel embedded cells (after 25 days) was confirmed by confocal fluorescence microscopy which also indicated that acidic pH of polymer solution did not affect the immobilized live cells. B. pseudomycoides immobilized hydrogel were demonstrated to be effective for treatment of municipal wastewater and reduced biochemical oxygen demand (BOD), chemical oxygen demand (COD), and protein content below the recommended levels. Overall, the results from this bench-scale work show that employing bacteria-embedded PVA/GA hydrogel for the treatment of municipal wastewater yield promising results which should be further explored in pilot/field-scale studies.

     

3D MRI measurements of the effects of wind direction on flow characteristics and contaminant dispersion in a model urban canopy

Environmental Fluid Mechanics - Three dimensional velocity fields and contaminant dispersion within an evenly spaced orthogonal array of cubic buildings (height = H) with a central tall...     

Photosynthesis mediated decrease in cadmium translocation protect shoot growth of Oryza sativa seedlings up on ammonium phosphate – sulfur fertilization

Cadmium (Cd) stress responses in seedlings of two Indian rice cultivars, MTU 7029 and MO 16 were investigated under ammonium-based fertilizer amendment. Cd translocation was reduced by fertilizer treatment. An increase in the production of organic acids as well as nitrogenous compounds and maintenance of nutrient status were implicated for decrease in Cd translocation which in turn promoted shoot growth. Fertilizer treatment increased photosynthetic pigments and activity of antioxidant enzymes that ensured steady photosynthetic rate during Cd stress. MO 16 showed Cd exclusion characteristics when compared with MTU 7029. Photosynthesis performance of MO 16 was not affected by Cd treatments. These findings suggest that photosynthesis influenced decrease in Cd translocation enhanced shoot growth of seedlings during ammonium phosphate–sulfur fertilizer supplementation.     

Bond behaviour of bamboo splints in cement-stabilised rammed earth blocks

This paper represents an effort to study the bond characteristics of plain and noded bamboo splints embedded in cement-stabilised rammed earth (CSRE) blocks. A series of CSRE pullout test specimens and two species of bamboo, namely Melocanna Baccifera and Bambusa Balcooa having an average tensile strength of 384 and 310 MPa, respectively, were fabricated using 4–10% Portland cement. These bamboo species are commonly available and widely used for construction in the north-eastern part of India. Besides considering the effects of soil strength, cement content, splint size and type on bond force and slip, the effect of embedded area was also briefly considered as part of the test programme. The test result showed that pullout bond resistance is correlated to rammed earth compressive strength, splint size and type, and embedded area.