深化改革 促进地震事业新发展——“地震科技的基础研究与应用研究”研讨班概述

本文概述了在当前面临地震队伍结构调整和人员分流的新形势下,如何进一步深化改革,追踪地震研究的世界先进水平,筛选和确定地震科研的前沿课题,为制定地震工作的深化改革政策提供科学依据。通过对30年地震预报实践的反思,提出今后发展方向。     

建立城市自然灾害承灾能力指标的思路探讨

本文论述了城市承灾能力的含义，分析了我国城市主要自然灾害以及承文体的类型和致灾因素，探讨了城市承灾能力指标，为城市承灾能力综合评判提供了依据．     

MODELS FOR WATER AND POWER SCHEDULING FOR THE CALIFORNIA STATE WATER PROJECT1

ABSTRACT: A large-scale simulation/optimization model provides schedules for operation of water and power for the California State Water Project (SWP). The SWP consists of a series of reservoirs linked by rivers, pumping plants, canals, tunnels, and generating plants and is operated by the California Department of Water Resources. The Department provides water to municipal and agricultural users, and manages its electrical loads and resources. The model, therefore, performs hydraulic and electrical computations leading to optimal operation of the entire system. It consists of hydraulic network programming components to meet the storage objectives at all the reservoirs, a linear programming component to determine the schedules at pumping and generating plants, an electrical network programming component to balance electrical loads and resources, and a number of other simulation components. It operates on yearly, weekly, and daily bases. It is primarily used for real-time operation of the SWP and can provide hourly detail schedules which are implemented by the SWP staff via a computerized system.     

粉尘爆炸反应工程学简要综述

１９９３年在波兰召开的第五届国际粉尘爆炸学术会议上，邓煦帆曾在论文中提议建立粉尘爆炸反应工程学，并提出学科的目的意义、性质、主要组成部分和研究方法。本文拟将国内外有关本学科范围内的贡献，加以简要综述，以期能逐渐形成本学科的自身体系和特点。     

南京理工大学高压实验室及其研制高压水射流切割机

南京理工大学高压实验室自８０年代初建立以来，在高压容器及武器发射管的自紧理论和工程应用、高压零部件研制、高压传感器和信号放大显示系统、高压介质等方面做了大量的工作。９３年以来，进行了水射流切割机的研制工作，解决了超高压缸体的动态密封、高压缸体的自增强、无触点式换向传感器、内衬不锈钢组合型高压容器等诸多问题，试制成功了水射流切割机样机。     

唐山市概况和灾害潜势分析

本文概述了唐山市的基本情况及其经受的自然灾害和发展趋势,这些内容为制定唐山市综合减灾规划的前提和基础。     

炼铁厂2#电除尘的设计与应用

新疆八一钢铁有限责任公司炼铁厂上料系统1^#转运站，1^#a转运站，2^#转运站及1^#、2^#高炉高道料仓在上料时，粉尘污染较为严重，为解决粉尘污染问题，1999年炼铁厂组织设计与施工了40m^2单室卧式3电场除尘器，工程投运后，收尘效果良好，岗位粉尘浓度与外排浓度均低于国家标准。     

计算流体力学(CFD)中的迭代法及其并行计算方法

应用计算流体力学 (CFD)方法分析事故原因已被广泛采用 ,笔者针对事故理论分析和流体计算过程中 ,运用CFD方法所存在计算量大的问题 ,分析和讨论了几种古典迭代法及其并行计算方法     

铝生产过程碱烧伤事故及对策

通过对山西铝厂氧化铝分厂5年的碱烧伤事故分析与研究,指出了发生该类事故的原因,提出了在氧化铝生产中预防的对策,对氧化铝生产企业降低碱烧伤事故具有指导意义。     

Inhibition of microbial activity of activated sludge by ammonia in leachate

Leachate samples were collected from the West New Territory Landfill (WENT), Hong Kong, and characterized in the laboratory. The analytical results confirmed that it has a typical nature of aged leachate with a low BOD₅/COD ratio of 0.22 and a high strength of ammonia-nitrogen around 5 g/L. A lab-scale study was conducted to investigate the inhibition of microbial activity of the activated sludge. In the first test, glucose-based synthetic wastewater was used in two parallel reactors. The experimental results demonstrated that COD removal declined from 95.1 to 79.1% and the dehydrogenase activity of the sludge decreased from 11.04 to 4.22 μg TF/mg mixed liquor suspended solids (MLSS), when the ammonia-nitrogen concentration increased from 50 mg/L to 800 mg/L progressively. The remaining NH₃⁺-N residue in the treated wastewater increased from 0.58 mg/L to 649 mg/L extensively. In the second test, mixed wastewater samples containing glucose and raw leachate were fed into six parallel biological reactors and operated on batch mode. The experimental results showed COD removal decreased from 97.7 to 78.1% and the dehydrogenase activity decreased from 9.29 to 4.93 μg triphenyl formazon (TF)/mg MLSS, respectively, when the ammonia-nitrogen concentration increased within the same range. Microbial inhibition could also be substantiated by a decrease of specific oxygen uptake rate (SOUR) from 68 to 45 mg O₂/g MLSS. These results suggested leachate containing high-strength ammonia-nitrogen should be pretreated to an acceptable NH₄⁺-N level before it is fed into biological reactors.