基于偏离份额分析法的产业结构分析研究——以山东省为例

以1999—2009年为考察期,利用偏离份额分析法(SSM)分析了山东省17个城市在产业结构与区位竞争力方面的优势和劣势,并根据产业结构偏离分量和区位偏离分量的组合情况,对各地区的经济增长状况进行了定位,有助于调整各城市的产业结构,缩小城市间的经济差距。     

废旧冰箱拆解及聚氨酯泡沫放置的一氟三氯甲烷释放量研究

研究了废旧冰箱聚氨酯(PUR)泡沫中所含的一氟三氯甲烷(CFC-11)总量,并对冰箱箱体切割过程、金属板剥离过程和PUR泡沫破碎后常温放置时的CFC-11释放量进行了测定。结果表明,PUR泡沫所含CFC-11总量占PUR泡沫质量的20.06%;箱体切割和金属板剥离过程中的CFC-11释放量分别占PUR泡沫中CFC-11总量的0.75%和2.32%;常温放置到第15天时,0.5、1.0、4.0、8.0 mm 4种粒径PUR泡沫颗粒的CFC-11累计释放量分别占PUR泡沫所含CFC-11总量的4.75%、5.25%、5.42%、6.50%,均高于箱体切割、金属板剥离过程中的CFC-11释放量。     

Source apportionment of wintertime secondary organic aerosol during the California regional PM10/PM2.5 air quality study

The UCD/CIT air quality model with the Caltech Atmospheric Chemistry Mechanism (CACM) was used to predict source contributions to secondary organic aerosol (SOA) formation in the San Joaquin Valley (SJV) from December 15, 2000 to January 7, 2001. The predicted 24-day average SOA concentration had a maximum value of 4.26 μg m^?3 50 km southwest of Fresno. Predicted SOA concentrations at Fresno, Angiola, and Bakersfield were 2.46 μg m^?3, 1.68 μg m^?3, and 2.28 μg m^?3, respectively, accounting for 6%, 37%, and 4% of the total predicted organic aerosol. The average SOA concentration across the entire SJV was 1.35 μg m^?3, which accounts for approximately 20% of the total predicted organic aerosol. Averaged over the entire SJV, the major SOA sources were solvent use (28% of SOA), catalyst gasoline engines (25% of SOA), wood smoke (16% of SOA), non-catalyst gasoline engines (13% of SOA), and other anthropogenic sources (11% of SOA). Diesel engines were predicted to only account for approximately 2% of the total SOA formation in the SJV because they emit a small amount of volatile organic compounds relative to other sources. In terms of SOA precursors within the SJV, long-chain alkanes were predicted to be the largest SOA contributor, followed by aromatic compounds. The current study identifies the major known contributors to the SOA burden during a winter pollution episode in the SJV, with further enhancements possible as additional formation pathways are discovered.     

偕胺肟合铁(Ⅲ)纤维对α-萘酚的吸附

以腈纶纤维为原料络合Fe3+制得偕胺肟合铁(Ⅲ)纤维,用其处理α-萘酚溶液,研究了偕胺肟合铁(Ⅲ)纤维对α-萘酚的吸附工艺条件和吸附动力学参数。实验结果表明,偕胺肟合铁(Ⅲ)纤维对α-萘酚的最佳吸附工艺条件为pH=3.0、吸附温度313.15K和吸附时间45min。在最佳工艺条件下,偕胺肟合铁(Ⅲ)纤维对α-萘酚的吸附在所研究的α-萘酚浓度范围内符合Freundlich等温吸附方程。未达到饱和吸附前,偕胺肟合铁(Ⅲ)纤维对α-萘酚的吸附符合一级反应动力学特征。     

中国能源生态足迹的时空动态特征及效应分析

运用生态足迹方法计算出1990—2007年中国能源消费的生态足迹。在此基础上,分析了能源足迹强度(EFI)、能源足迹生态压力(EPIEF)的时空动态变化特征。结果表明,近20年来我国能源足迹波动上升,能源消费结构有所改善,但煤炭足迹仍占主导,近几年又有回升趋势;能源足迹强度呈幂指数衰减,能源利用效率不断提高;EPIEF呈上升趋势,说明能源利用对自然生态系统的压力逐渐增大。在空间分布上,各省区能源足迹差异显著,能源足迹强度由西向东逐渐降低,而EPIEF则由西向东呈增大趋势。依据EPIEF指数将中国30个省区划分为能源足迹生态盈余区(EPIEF1)、生态轻度亏损区(1EPIEF5)和生态严重亏损区(EPIEF5)3种类型。     

辽河流域工业行业污染减排潜力实证研究

随着经济总量的持续增长,降低产污强度,从源头减少污染产生是促进污染减排的重要手段。基于2008年辽河流域工业行业环境统计数据,以COD,NH3-N两项指标为研究对象,识别出7类重点行业,其COD,NH3-N产生量分别占工业产生总量的77%、90%,排放量占工业总量的81%、77%。分析了重点行业的产污强度及末端去除率水平,表明工业行业产污强度高是工业污染严重的主要原因,发展清洁生产具有较大的减排潜力。设计工业行业发展清洁生产情景并测算出到2015年辽河工业的污染物排放情况,结果显示,通过适当限制重污染行业增长速度、重点降低产污强度、适当提高末端去除率,在流域工业行业产值年均增长率14.75%的情况下,2015年工业污染物排放量与2008年相比,COD削减45%-55%,NH3-N削减21%-33%。以此为流域工业污染防治"十二五"规划提供技术支持。     

Concentrations,atmospheric partitioning,and air–water/soil surface exchange of polychlorinated dibenzo-p-dioxin and dibenzofuran along the upper reaches of the Haihe River basin,North China

Polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/PCDF) were overall measured and compared in ambient air, water, soils, and sediments along the upper reaches of the Haihe River of North China, so as to evaluate their concentrations, profiles, and to understand the processes of gas–particle partitioning and air–water/soil exchange. The following results were obtained: (1) The average concentrations (toxic equivalents, TEQs) of 2,3,7,8-PCDD/PCDF in air, water, sediment, and soil samples were 4,855 fg/m³, 9.5 pg/L, 99.2 pg/g dry weight (dw), and 56.4 pg/g (203 fg TEQ/m³, 0.46 pg TEQ/L, 2.2 pg TEQ/g dw, and 1.3 pg TEQ/g, respectively), respectively. (2) Although OCDF, 1,2,3,4,6,7,8-HpCDF, OCDD, and 1,2,3,4,6,7,8-HpCDD were the dominant congeners among four environmental sinks, obvious discrepancies of these congener and homologue patterns of PCDD/PCDF were observed still. (3) Significant linear correlations for PCDD/PCDF were observed between the gas–particle partition coefficient (K _p) and the subcooled liquid vapor pressure (P _L ⁰) and octanol–air partition coefficient (K _oa). (4) Fugacity fraction values of air–water exchange indicated that most of PCDD/PCDF homologues were dominated by net volatilization from water into air. The low-chlorinated PCDD/PCDF (tetra- to hexa-) presented a strong net volatilization from the soil into air, while high-chlorinated PCDD/PCDF (hepta- to octa-) were mainly close to equilibrium for air–soil exchange.     

Medium optimization for the production of anti-cyanobacterial substances by Streptomyces sp. HJC-D1 using response surface methodology

Bioremediation using isolated anti-cyanobacterial microorganism has been widely applied in harmful algal blooms (HABs) control. In order to improve the secretion of activated anti-cyanobacterial substances, and lower the cost, a sequential optimization of the culture medium based on statistical design was employed for enhancing the anti-cyanobacterial substances production and chlorophyll a (Chl a) removal by Streptomyces sp. HJC-D1 in the paper. Sucrose and KNO₃ were selected as the most suitable carbon and nitrogen sources based on the one-at-a-time strategy method, and sucrose, KNO₃ and initial pH were found as major factors that affected the anti-cyanobacterial ability of the isolated stain via the Plackett–Burman design. Based on the response surface and canonical analysis, the optimum condition of culture medium was obtained at 22.73 g l^-1 of sucrose, 0.96 g l^-1 of KNO₃, and initial pH 8.82, and the Chl a removal efficiency by strain HJC-D1 increased from 63?±?2 % to 78?±?2 % on the optimum conditions.     

水泥窑共处置过程中水泥生料对砷的吸附/冷凝特性

针对水泥生料开展了氮吸附与SEM测试分析,研究了水泥生料的比表面积,孔径结构和微观表面积。同时,利用管式回转炉和控温立式炉联用装置研究了砷元素在水泥生料上的吸附冷凝特性。结果表明,水泥生料的比表面积很小,微观表面结构致密无孔,砷元素主要是冷凝在生料表面上。进入吸附冷凝炉的重金属可以分为3部分,第1部分冷凝在管壁上,占80%左右;第2部分吸附/冷凝在生料上,占10%左右;第3部分随烟气释放到空气中,不到10%。水泥生料对砷的吸附冷凝量随时间的增加而增加,随温度的升高而降低。水泥生料对砷的吸附冷凝特性可用双常数速率方程拟合,拟合效果较好,计算得表观活化能在6~7 kJ/mol之间。此外,砷的初始浓度对水泥生料的吸附冷凝特性影响很小。