Management of municipal solid waste incineration residues

The management of residues from thermal waste treatment is an integral part of waste management systems. The primary goal of managing incineration residues is to prevent any impact on our health or environment caused by unacceptable particulate, gaseous and/or solute emissions. This paper provides insight into the most important measures for putting this requirement into practice. It also offers an overview of the factors and processes affecting these mitigating measures as well as the short- and long-term behavior of residues from thermal waste treatment under different scenarios. General conditions affecting the emission rate of salts and metals are shown as well as factors relevant to mitigating measures or sources of gaseous emissions.     

Mechanical properties and leaching modeling of activated incinerator bottom ash in Portland cement blends

In the present study the evolution of mechanical strength and the leaching behavior of major and trace elements from activated incinerator bottom ash/Portland cement mixtures were investigated. Chemical and mechanical activation were applied with the purpose of improving the reactivity of bottom ash in cement blends. Chemical activation made use of NaOH, KOH, CaCl₂ or CaSO₄, which were selected for the experimental campaign on the basis of the results from previous studies. The results indicated that CaCl₂ exhibited by far the best effects on the evolution of the hydration process in the mixtures; a positive effect on mechanical strength was also observed when CaSO₄ was used as the activator, while the gain in strength produced by KOH and NaOH was irrelevant. Geochemical modeling of the leaching solutions provided information on the mineral phases responsible for the release of major elements from the hardened materials and also indicated the important role played by surface sorption onto amorphous Fe and Al minerals in dictating the leaching of Pb. The leaching of the other trace metal cations investigated (Cu, Ni and Zn) could not be explained by any pure mineral included in the thermodynamic database used, suggesting they were present in the materials in the form of complex minerals or phase assemblages for which no consistent thermodynamic data are presently available in the literature.     

Benthic diatom community response to metal contamination from an abandoned Cu mine: Case study of the Gromolo Torrent (Italy)

Environmental contamination has become a global problem of increasing intensity due to the exponential growth of industrialization. One main debated issue is the metal contamination of rivers receiving Acid Mine Drainage (AMD) from active/abandoned mines. In order to assess the quality of lotic systems, diatoms are commonly used, as their assemblage modifies on the basis of changes in environmental parameters. Benthic diatom changes were analyzed along the metal-impacted Gromolo Torrent (Liguria, NW Italy) with the aim of understanding the effects of input from the abandoned Libiola Cu mine. The results support the hypothesis that metals from AMD lead to massive changes in diatoms, resulting in low biological diversity and in a shift of dominance, passing from the genera Cymbella and Cocconeis to more tolerant and opportunistic species, such as Achnanthidium minutissimum and Fragilaria rumpens. The high concentrations of labile metals, measured through Diffusion Gradients in Thin-films (DGT) immediately downstream of the two AMD inputs in the torrent, corresponded to a sudden decrease in the presence of diatoms, indicating the possible reaching of acute toxic levels. In particular, A. minutissimum dominated the mining area and was positively correlated with Cu and Zn; whereas F. rumpens bloomed downstream of this area, where the metal content was diluted, and was positively correlated with As and Pb. Finally, an important abundance of Nitzschia palea and teratological forms of A. minutissimum and F. rumpens were observed downstream from the mine, indicating that metals may have an important impact on diatoms up to the torrent mouth.     

An experimental study on fermentative H2 production from food waste as affected by pH

Batch dark fermentation experiments were performed on food waste and mixtures of food waste and wastewater activated sludge to evaluate the influence of pH on biological H₂ production and compare the process performance with and without inoculum addition. The effect of a preliminary thermal shock treatment of the inoculum was also investigated as a means to harvest the hydrogenogenic biomass. The best performance in terms of both H₂ generation potential and process kinetics was observed at pH = 6.5 under all experimental conditions (no inoculum, and untreated or thermally treated inoculum added). H₂ production from food waste was found to be feasible even without inoculum addition, although thermal pre-treatment of the inoculum notably increased the maximum production and reduced the lag phase duration. The analysis of the fermentation products indicated that the biological hydrogen production could be mainly ascribed to a mixed acetate/butyrate-type fermentation. However, the presence of additional metabolites in the digestate, including propionate and ethanol, also indicated that other metabolic pathways were active during the process, reducing substrate conversion into hydrogen. The plateau in H₂ generation was found to mirror the condition at which soluble carbohydrates were depleted. Beyond this condition, homoacetogenesis probably started to play a role in the degradation process.     

A review of dark fermentative hydrogen production from biodegradable municipal waste fractions

Hydrogen is believed to play a potentially key role in the implementation of sustainable energy production, particularly when it is produced from renewable sources and low energy-demanding processes. In the present paper an attempt was made at critically reviewing more than 80 recent publications, in order to harmonize and compare the available results from different studies on hydrogen production from FW and OFMSW through dark fermentation, and derive reliable information about process yield and stability in view of building related predictive models. The review was focused on the effect of factors, recognized as potentially affecting process evolution (including type of substrate and co-substrate and relative ratio, type of inoculum, food/microorganisms [F/M] ratio, applied pre-treatment, reactor configuration, temperature and pH), on the fermentation yield and kinetics. Statistical analysis of literature data from batch experiments was also conducted, showing that the variables affecting the H₂ production yield were ranked in the order: type of co-substrate, type of pre-treatment, operating pH, control of initial pH and fermentation temperature. However, due to the dispersion of data observed in some instances, the ambiguity about the presence of additional hidden variables cannot be resolved. The results from the analysis thus suggest that, for reliable predictive models of fermentative hydrogen production to be derived, a high level of consistency between data is strictly required, claiming for more systematic and comprehensive studies on the subject.     

The effects of accelerated carbonation on CO2 uptake and metal release from incineration APC residues

This work presents the results of a study on accelerated carbonation of incinerator air pollution control residues, with a particular focus on the modifications in the leaching behaviour of the ash. Aqueous carbonation experiments were carried out using 100% CO₂ at different temperatures, pressures and liquid-to-solid ratios, in order to assess their influence on process kinetics, CO₂ uptake and the leaching behaviour of major and trace elements. The ash showed a particularly high reactivity towards CO₂, owing to the abundance of calcium hydroxides phases, with a maximum CO₂ uptake of ～250 g/kg. The main effects of carbonation on trace metal leaching involved a significant decrease in mobility for Pb, Zn and Cu at high pH values, a slight change or mobilization for Cr and Sb, and no major effects on the release of As and soluble salts. Geochemical modelling of leachates indicated solubility control by different minerals after carbonation. In particular, in the stability pH range of carbonates, solubility control by a number of metal carbonates was clearly suggested by modelling results. These findings indicate that accelerated carbonation of incinerator ashes has the potential to convert trace contaminants into sparingly soluble carbonate forms, with an overall positive effect on their leaching behaviour.     

Physical and mechanical properties of cement-based products containing incineration bottom ash

This paper presents the results of a wider experimental programme conducted in the framework of the NNAPICS ("Neural Network Analysis for Prediction of Interactions in Cement/Waste Systems") project funded by the European Commission and a number of industrial partners under Brite-EuRamIII. Based on the fact that bottom ashes from waste incineration are classified as non-hazardous wastes according to the European Waste Catalogue, the aim of the present work was to investigate the feasibility of addressing the potential use of such residues in cement-based mixtures. This issue was suggested by the analysis of the properties of different bottom ashes coming from Italian municipal and hospital solid waste incinerators, which showed a chemical composition potentially suitable for such applications. Different mixes were prepared by blending bottom ash with ordinary Portland cement in different proportions and at different water dosages. The solidified products were tested for setting time and bulk density, unconfined compressive strength and evaporable water content at different curing times. The results of the experimental campaign were analysed through a statistical procedure (analysis of variance), in order to investigate the effect of mixture composition (waste replacement level and water dosage) on the product properties.     

Mutagenic properties of PM2.5 air pollution in the Padana Plain (Italy) before and in the course of XX Winter Olympic Games of "Torino 2006"

PM2.5 is one of the most important aspects of environmental health. This air pollutant is breathable and it is implicated in several chronic adverse health effects such as the decrease of respiratory functionality and cancer. Several in vitro bioassays are able to predict the mutagenic/carcinogenic activity of the environmental pollutants and mixtures of them. In this study PM2.5 air pollution was daily monitored in three cities located in the Northern part of Italy and the mutagenic properties of the PM2.5 organic extracts were also assessed. Samplings lasted 14 months and cover the period of the Winter Olympic Games of "Torino 2006". In this work, the levels of PM2.5, its mutagenic properties (detected with Salmonella typhimurium assay), the role of the Olympic Games as environmental factor and some meteorological data are discussed. The mean concentration of PM2.5 measured in Torino was 45.4 (+/-30.6) microg/m(3), in Pavia 37.6 (+/-25.6) microg/m(3), in Verona 43.1 (+/-28.5) microg/m(3). Findings of the monthly pool bioassay were in Torino 107 (+/-104) net revertans/m(3), in Pavia 108 (+/-89) net revertans/m(3), in Verona 128 (+/-109) net revertans/m(3). The Olympic Games period data show that PM2.5 pollution and its load of mutagenic potential are different and partially independent phenomena. The Olympic Games had not a great impact on the PM2.5 pollution. The exclusive PM2.5 gravimetric analysis shows a potential human risk if compared with the latest international guide values but it does not describe exhaustively the human health risk associated to the presence of this particular air pollutant. Moreover, the chemical and biological activity qualification of the PM organic extracts as a whole, can instead improve the knowledge.