Activities of 210Po and 210Pb in the water column at Kuala Selangor, Malaysia

Natural radionuclides, such as (210)Po and (210)Pb were measured in the water samples collected from six stations at Kuala Selangor, Malaysia. Results for (210)Po and (210)Pb in dissolved and particulate phases have showed the difference in distribution and chemical behavior. The fluctuation activities of (210)Po and (210)Pb depend on wave action, geology and degree of fresh water input occurring at study areas and probably due to different sampling dates. The distribution coefficient, K(d), values of (210)Po and (210)Pb ranged from 2.0 x 10(3)lg(-1) to 265.15 x 10(5)lg(-1), and from 3.0 x 10(3)lg(-1) to 558.16 x 10(5)lg(-1), respectively. High K(d) values of (210)Po and (210)Pb indicated that a strong adsorption of (210)Po and (210)Pb onto suspended particles, and the sinking of both nuclides on the seabed at study locations were controlled by the characteristics of suspended particles.     

Best location of the small wind turbine around a single high-rise building

This research is a three-dimensional investigation about the aerodynamic interaction between the wind flow and a single high-rise building. In order to find location(s) with high potential of velocity around the building, a wide variety of wind speeds ranging from 2 to 10 m/s is studied. On the other hand, a high-rise building with the ratio of height to width of H/W = 3 is considered. Computations are performed numerically by means of the finite volume approach. Several results are obtained in the present numerical study. For example, it is found that due to wind-structure vertical interaction, locations with enhanced velocities are developed on the building roof in which the rate of this enhancement increases with increasing the wind speed. In addition, over the building, “lines C and D” are realized as the best locations having high power potentials and low turbulence intensities. In addition, lateral wind-structure interaction revealed that for all wind speeds, location of L/W = 0.5 is the best for the small wind turbine installation.