使用高分辨色质联机AUTOSPEC-ULTIMANT分析二噁英及呋喃

"二噁英"是指具有相似化学结构和生物特征的一族化合物,分别属于三大类别:多氯代二苯并二噁英(PC-DDs),多氯代二苯并呋喃(PCDFs)以及多氯联苯(PCBs).PCDDs和PCDFs无商业目的性生产,而是在大量的人类活动中产生的.自然过程也可以产生PCDDs和PCDFs.在过去的十年里,环境立法机构和企业一起致力于减少二噁英的排放.     

Fuelwood assessment at the micro-watershed level:a case study in Garhwal Himalaya,India

Biomass,as fuelwood,is one of the major sources of energy in rural areas,especially in the mountainous regions of the world.As the increasing human population exerts more pressure on the forest thereby inducing an adverse effect on the sustainability of the ecosystem,which consequently causes fuelwood crisis at a local level,this crisis is spatio-temporal in nature.Thus,the major objective of this study is to assess the sustainability of fuelwood at different probable scenarios at a micro watershed level.The present study was conducted in the Phakot watershed,the Tehri Garhwal district of central Himalaya in India,during 2006-2008.Based on the vegetation composition in the study area,the net primary productivity(NPP)value of the Oak forest,and mixed oak and sal forests,was used for the quantification of fuelwood availability in evergreen and deciduous forests,respectively.The fuelwood demand was calculated on the basis of seasonal fuelwood consumption values.Nine probable permutations for availability-demand scenarios assuming the existence of high(H),low(L)and average(A)conditions were analyzed for evaluating the stress.The available annual harvestable fuelwood in the watershed is in the minimum and maximum ranges of 2283.28 to 4066.00 tons,respectively,per year whereas it has a demand of 110.76 tons as the minimum to 3659 tons as the maximum annually.This shows that in the current availabilitydemand scenario,the watershed does not have fuelwood crisis in the present situation but needs to maintain the sustainability of the system.Based on our study,it is concluded that,globally,more spatio-temporal study is required to understand the issues at the local level.     

Air assimilative capacity-based environment friendly siting of new industries--a case study of Kochi region, India

Air pollution has become a matter of grave concern, particularly in mega-cities and urban areas, where the situation is alarming and becoming more and more severe day-by-day and warrants, therefore, careful planning to facilitate future industrial development. Site selection, with the objective of minimizing adverse environmental impacts based on environmental criteria is a vital prerequisite, particularly for air polluting industries. In order to locate any air polluting industry, the assimilative capacity of the region needs to be assessed carefully and planned accordingly, so that the receiving environment is not adversely affected. Assimilative capacity of a region/airshed, widely represented through the ventilation coefficient by many researchers in the past, does not give a clear picture about the amount of emission load that can be assimilated in a given region. The ventilation coefficient, at best, can only present a broad picture about the air pollution dispersion potential (low, medium or high) of the region. A modified approach, which utilizes air quality modelling as a tool to estimate the maximum allowable emission load that a region can assimilate without violating the stipulated standards, has been used for estimating the assimilative capacity of the air environment. Details of this approach have been presented in this paper through a case study carried out for the Kochi region, located in the Kerala State of India. A variety of emission and meteorological scenarios have been considered and critical emission loads have been estimated. This approach shall provide necessary technical guidance to the environmental regulatory authorities as well as to the industries in planning environment friendly industrial development.     

In vitro brain acetylcholinesterase response among three inbred strains of mice to monocrotophos.

The strain differences in the neurotoxic potential of monocrotophos (MCP) were assessed by determining the inhibition of brain acetylcholinesterase (AChE) in BALB/cAnN, DBA/2J and C57BL/6J in vitro. MCP being a competitive inhibitor for AChE, alters the Km values widely among these inbred strains. Comparatively least alterations in Km were found in BALB/cAnN and maximum in DBA/2J. Based on the Ki values DBA/2J was found to be the most sensitive strain to MCP inhibition followed by C57BL/6J and BALB/cAnN.     

Assessing impacts of partial mass depletion in DNAPL source zones: II. Coupling source strength functions to plume evolution

Analytical solutions, describing the time-dependent DNAPL source-zone mass and contaminant discharge rate, derived previously in Part I [Falta, R.W., Rao, P.S., Basu, N., this issue. Assessing the impacts of partial mass depletion in DNAPL source zones: I. Analytical modeling of source strength functions and plume response. J. Contam. Hydrol.] are used as a flux-boundary condition in a semi-analytical contaminant transport model. These analytical solutions assume a power relationship between the flow-averaged source concentration, and the source DNAPL mass; the empirical exponent (gamma) is a function of the flow field heterogeneity, DNAPL architecture, and the correlation between them. The DNAPL source strength terms can account for partial source remediation, either at time zero, or at some later time after the DNAPL release. The transport model considers advection, retardation, three-dimensional dispersion, and sequential first-order decay/production of several species. A separate solution is used to compute the time-dependent mass of each contaminant in the plume. A series of examples using different values of gamma shows how the benefits of partial DNAPL source remediation can vary with site conditions. In general, when gamma>1, relatively large short-term reductions in the plume concentrations and mass occur, but the source longevity is not strongly affected. Conversely, when gamma<1, the short-term reductions in the plume concentrations and mass are smaller, but the source longevity can be greatly reduced. In either case, the source remediation effort is much more effective if it is undertaken at an early time, before much contaminant mass has entered the plume. If the remediation effort is significantly delayed, the leading parts of the plume are not affected by the source remediation, and additional control or remediation of the plume itself is required.     

A stochastic-advective transport model for NAPL dissolution and degradation in non-uniform flows in porous media

Remediation schemes for contaminated sites are often evaluated to assess their potential for source zone reduction of mass, or treatment of the contaminant between the source and a control plane (CP) to achieve regulatory limits. In this study, we utilize a stochastic stream tube model to explain the behavior of breakthrough curves (BTCs) across a CP. At the local scale, mass dissolution at the source is combined with an advection model with first-order decay for the dissolved plume. Field-scale averaging is then employed to account for spatial variation in mass within the source zone, and variation in the velocity field. Under the assumption of instantaneous mass transfer from the source to the moving liquid, semi-analytical expressions for the BTC and temporal moments are developed, followed by derivation of expressions for effective velocity, dispersion, and degradation coefficients using the method of moments. It is found that degradation strongly influences the behavior of moments and the effective parameters. While increased heterogeneity in the velocity field results in increased dispersion, degradation causes the center of mass of the plume to shift to earlier times, and reduces the dispersion of the BTC by lowering the concentrations in the tail. Modified definitions of effective parameters are presented for degrading solutes to account for the normalization constant (zeroth moment) that keeps changing with time or distance to the CP. It is shown that anomalous dispersion can result for high degradation rates combined with wide variation in velocity fluctuations. Implications of model results on estimating cleanup times and fulfillment of regulatory limits are discussed. Relating mass removal at the source to flux reductions past a control plane is confounded by many factors. Increased heterogeneity in velocity fields causes mass fluxes past a control plane to persist, however, aggressive remediation between the source and CP can reduce these fluxes.     

应用重组孕激素基因酵母测定饮用水中内分泌干扰物的方法

研究了用重组孕激素受体基因酵母测定饮用水中内分泌干扰物的方法,并利用该种方法检测了南方某水厂不同处理工艺过程水样对孕激素受体活性的抑制水平.结果表明,重组孕激素受体基因酵母能够与孕激素专一性的结合,诱导产生明显的剂量-效应关系,EC₅₀值为0.5 nmol/L,具有较高灵敏度;环境内分泌干扰物五氯酚和壬基酚具有孕激素受体抑制活性,其IC₅₀值分别为2.4μmol/L和3.7μmol/L;重组孕激素受体基因/报道基因的酵母技术是一种筛选和定量分析具有孕激素受体抑制活性的内分泌干扰物的快速、有效方法.结合固相萃取的前处理技术,重组孕激素受体基因酵母对水厂不同处理工艺水样检测出明显的孕激素受体抑制活性,抑制率均大于58%,表明重组孕激素受体基因酵母检测技术能够快速监测和鉴别水样中具有抑制孕激素受体活性的物质.     

Selective removal of common cyanotoxins: a review

Environmental Science and Pollution Research - The development of cyanobacterial blooms can have adverse effects on water bodies and may produce cyanotoxins. Several physical and chemical methods...