Determination of polychlorinated biphenyl and polycyclic aromatic hydrocarbon marine regional Sediment Quality Guidelines within the European Water Framework Directive

Marine regional Sediment Quality Guidelines (SQG) for polychlorinated biphenyls (PCB) and polycyclic aromatic hydrocarbons (PAH) from the Basque coast (SE Bay of Biscay) were determined, on the basis of sediment chemistry, toxicity and benthic community disturbance from analysis of 756 estuarine and coastal samples. The SQG were calculated using a percentile approach (based upon effect and non-effect data), using non-normalised and normalised concentration, by total organic carbon. However, normalisation by total organic carbon did not result in any improvement in accuracy compared with non-normalised values. Hence, this study proposes non-normalised SQG values for assessment of the chemical and physicochemical status in marine waters in the Basque Country, within the Water Framework Directive: 24.6–29 μg kg^?1 for total PCBs; 164–285 μg kg^?1 for low molecular weight PAH; 922–1537 μg kg^?1 for high molecular weight PAH; and 1607–2617 μg kg^?1 for total PAH.     

Dust from Zambian smelters: mineralogy and contaminant bioaccessibility

Metal smelting is often responsible for local contamination of environmental compartments. Dust materials escaping from the smelting facilities not only settle in the soil, but can also have direct effects on populations living close to these operations (by ingestion or inhalation). In this particular study, we investigate dusts from Cu–Co metal smelters in the Zambian Copperbelt, using a combination of mineralogical techniques (XRD, SEM/EDS, and TEM/EDS), in order to understand the solid speciation of the contaminants, as well as their bioaccessibility using in vitro tests in simulated gastric and lung fluids to assess the exposure risk for humans. The leaching of metals was mainly dependent on the contaminant mineralogy. Based on our results, a potential risk can be recognized, particularly from ingestion of the dust, with bioaccessible fractions ranging from 21 to 89 % of the total contaminant concentrations. In contrast, relatively low bioaccessible fractions were observed for simulated lung fluid extracts, with values ranging from 0.01 % (Pb) up to 16.5 % (Co) of total contaminant concentrations. Daily intakes via oral exposure, calculated for an adult (70 kg, ingestion rate 50 mg dust per day), slightly exceeded the tolerable daily intake limits for Co (1.66× for fly ash and 1.19× for slag dust) and occasionally also for Pb (1.49×, fly ash) and As (1.64×, electrostatic precipitator dust). Cobalt has been suggested as the most important pollutant, and the direct pathways of the population’s exposures to dust particles in the industrial parts of the Zambian Copperbelt should be further studied in interdisciplinary investigations.     

Platinum in PM2.5 of the metropolitan area of Mexico City

The increase in platinum (Pt) in the airborne particulate matter with size ≤2.5 µm (PM_2.5) in urban environments may be interpreted as result of the abrasion and deterioration of automobile catalyst. Nowadays, about four million vehicles in Mexico City use catalytic converters, which means that their impact should be considered. In order to evaluate the contribution of Pt to environmental pollution of the metropolitan area of Mexico City (MAMC), airborne PM_2.5 was collected at five different sites in the urban area (NW, NE, C, SW, SE) in 2011 during April (dry-warm season), August (rainy season) and December (dry-cold season). Analytical determinations were carried out using a ICP-MS with a collision cell and kinetic energy discrimination. The analytical and instrument performance was evaluated with standard road dust reference material (BCR-723). Median Pt concentration in the analyzed particulate was is 38.4 pg m^?3 (minimal value 1 pg m^?3 maximal value 79 pg m^?3). Obtained Pt concentrations are higher than those reported for other urban areas. Spatial variation shows that SW had Pt concentration significantly higher than NW and C only. Seasonal variation shows that Pt median was higher in rainy season than in both dry seasons. A comparison of these results with previously reported data of PM₁₀ from 1991 and 2003 in the same studied area shows a worrying increase in the concentration of Pt in the air environment of MAMC.     

Identification and assessment of water pollution as a consequence of a leachate plume migration from a municipal landfill site (Tucumán,Argentina)

Landfills constitute potential sources of different pollutants that could generate human health and environmental problems. While some landfills currently work under the protection of a bottom liner with leachate collection, it was demonstrated that migration could take place even yet with these cautions. The purpose of this paper is to assess the pollution caused by a leachate plume from a municipal landfill that is affecting both groundwater and surface waters. The research was carried out at Pacará Pintado landfill in northwestern Argentina. Analysis of water samples indicates that leachate is affecting groundwater under the landfill area and an abandoned river channel hydraulically connected. In the center of the landfill area, the plume is anoxic and sulfate, nitrate, iron and manganese reduction zones were identified. Leachate plume presented high concentration of organic matter, Fe, Mn, NH₄ ⁺, Cl^? and Cr reaching an extension of 900 m. The presence of a leachate plume in a landfill site with a single liner system implies that the use of this groundwater pollution control method alone is not enough especially if permeable sediments are present below.     

Utilization of Natural Oils for Decomposition of Polyurethanes

The model polyurethane foam and model compact polyurethane material were prepared and then decomposed by means of natural oils. Castor oil and fish oil based polyol were used in this study. Optimal conditions for the polyurethane decomposition were found. Temperature 250 °C was necessary for efficient polyurethane decomposition by castor oil whereas 200 °C is sufficient in the case of fish oil based polyol. Prepared products have hydroxyl number in the range of 95–168 mg KOH g⁻¹. During the polyurethane decomposition no cleavage of double bonds in the fatty acid chains of castor oil and fish oil based polyol was observed.     

PET from Used Beverage Bottles: A Material for Preparation of Biologically Degradable Copolyesters

Poly(ethylene terephthalate) from used colorless beverage bottles was solvolyzed by ethane-1,2-diol. Hydroxyl end-groups present in the mixture of polyols formed were used to initiate the polymerization of ??-caprolactone (CLO) at 190?°C. Polycondensation (190?°C) of the reaction mixture containing an equilibrium amount of lactone corresponding to the reaction temperature yield an aliphatic?Caromatic copolyester. A variety of copolyesters containing 20?C60?mol. % CLO structural units was prepared. The microstructure of their macromolecules was analyzed using ¹H?NMR spectroscopy. Copolyesters were characterized by thermal analysis and tensile tests and their biodegradation potential was checked by the composting test.     

Synthesis of Polylactide-b-Poly (Dimethyl Siloxane) Block Copolymers and Their Blends with Pure Polylactide

The synthesis of polylactide (PLA)-b-poly (dimethyl siloxane) (PDMS) linear block copolymers and their use in blends with pure-PLA are described. PLA-b-PDMS linear block copolymers were obtained by the transesterification reaction in chloroform solution between poly(dimethyl siloxane) bis (2-aminopropyl ether) (molecular weight 2,000?Da) with PLA in the presence of stannous octoate. Molecular weights (Mw) of the block copolymers were varied from 53,800 to 63,600?Da while that of pristine PLA was 73,600?Da. The copolymers obtained were purified by fractional precipitation and then characterized by ¹H NMR, FTIR, GPC, viscometry and DSC techniques. Blends of pure PLA with PLA-b-PDMS block copolymers displayed improved elastic properties (elongation up to 140%) compared to pure PLA (elongation ~9%). Thermal, mechanical and morphological characterization of the blends were also conducted.     

Effect of aeration rate and moisture content on the emissions of selected VOCs during municipal solid waste composting

The influence of the industrial control composting conditions (aeration 0.005–0.300?L_air?kg^?1 and moisture 40–70?%) of municipal solid waste on the composition of the selected compound emitted (limonene, β-pinene, 2-butanone, undecane, phenol, toluene, dimethyl sulfide, dimethyl disulfide) was studied. The highest emissions of volatile organic compounds (VOCs) were observed in the early stages of the processes. At the end of the process, low concentrations of the emitted compounds were found. Aeration rate had a strong effect on emissions. High aeration rate (0.300?L_air?kg^?1?min^?1) caused normally high emissions of all selected compounds whereas low aeration rates (0.05?L_air?kg^?1?min^?1) could cause anaerobiosis problems and generation of organic sulphur compounds. We observed that the effect of the moisture upon the emitted concentrations varied depending on the studied compound.     

Role of the vitamin E model compound Trolox in the prevention of Cr(VI)-induced cellular damage

Given the wide industrial use of chromium (Cr) and its environmental contamination, chromium represents a risk to humans exposed to the metal. Considering that Cr(VI) is a potent oxidizing agent that increases intracellular oxidation and DNA damage, it would be worth considering the pretreatment of cells with antioxidants as a means of preventing Cr(VI)-induced toxicity. The objective of this study was to pretreat yeast cells with the water-soluble vitamin E analogue Trolox in an effort to increase cell tolerance against reactive chromium and reactive oxygen species formed during Cr(VI) reduction. Results revealed a decrease in Cr(VI)-induced cytotoxicity and mitotic gene conversions in Trolox-pretreated cells. The protective effect of Trolox in Cr(VI) induced genotoxicity was confirmed also with the prokaryotic Salmonella typhimurium SOS/umu test. Pretreatment of cells with Trolox (1) increased total Cr bioaccumulation, (2) decreased Cr(VI)-induced intracellular oxidation, (3) decreased Cr(V) persistence and (4) increased OH^? formation in yeast extracts. These findings might be useful in directing future investigations concerning the use of Trolox as a human antioxidant supplement, and in clinical applications related to Cr-induced genotoxicity in occupational and environmental situations where chromium is a problem.     

Photosynthetic sulfur bacteria from Zimapan Reservoir (Mexico): Seasonal variations and toxic effects of zinc in a microcosm system

Photosynthetic sulfur bacteria oxidize the sulfide produced by dissimilatory sulfate-reducing bacteria, thus preventing the occurrence of pollution by these compounds in the oxygenic zone of aquatic systems. Zinc is one of the most abundant heavy metals. Its toxic effects have been documented in various organisms that can photosynthesize, but a lack of information prevails in this respect, about photosynthetic sulfur bacteria. The aim of the present study was to evaluate the toxic effects of zinc on green sulfur bacteria (Chlorobiaceae) and purple sulfur bacteria (Chromatiaceae) in a microcosm as well to explore the possible relationships between the bacterial population growths with the physicochemical properties of the metalimnion of Zimapan Reservoir (Mexico) during a 1-year period. Hydrosoluble organic carbon (HOC) and light availability in the metalimnion were the limiting factors for growth in these bacteria. Higher HOC levels occurred in Spring, at the end of the wet season and in Winter. Current zinc levels in the reservoir seem to elicit toxic effects. At lethal zinc concentrations, the best concentration-response relationship was shown. The biomarker for purple sulfur bacteria was the bacteriochlorophyll content, while total reducing sugar was the best biomarker for green sulfur bacteria. At sublethal concentrations, zinc alters adenosine triphosphate levels, total reducing sugar, total protein content, and bacteriochlorophyll content. The observed responses indicate that green sulfur bacteria are more sensitive than purple sulfur bacteria and are suitable target organisms for use in establishing the accepted threshold concentration of zinc (NOEC 0.056–0.097 mg L^?1 of Zn) in anoxic deep water.