Developments to a landfill processes model following its application to two landfill modelling challenges

The landfill model LDAT simulates the transport and bio-chemical behaviour of the solid, liquid and gas phases of waste contained in a landfill. LDAT was applied to the LMC1 and LMC2 landfill modelling challenges held in 2009 and 2011. These were blind modelling challenges with the model acting in a predictive mode based on limited early time sections of full datasets. The LMC1 challenge dataset was from a 0.34 m deep 0.48 m diameter laboratory test cell, and the LMC2 dataset was from a 55 m × 80 m 8 m deep landfill test cell which formed part of the Dutch sustainable landfill research programme at Landgraaf in the Netherlands. The paper describes developments in LDAT arising directly from the experience of responding to the two challenges, and discusses the model input and output data obtained from a calibration using the full datasets.The developments include the modularisation of the model into a set of linked sub-models, the strategy for converting conventional waste characteristics into model input parameters, the identification of flexible degradation pathways to control the CO₂:CH₄ ratio, and the application of a chemical equilibrium model that includes a stage in which the solid waste components dissolve into the leachate.     

The potential of algae blooms to produce renewable gaseous fuel

Ulva lactuca (commonly known as sea letuce) is a green sea weed which dominates Green Tides or algae blooms. Green Tides are caused by excess nitrogen from agriculture and sewage outfalls resulting in eutrophication in shallow estuaries. Samples of U. lactuca were taken from the Argideen estuary in West Cork on two consecutive years. In year 1 a combination of three different processes/pretreatments were carried out on the Ulva. These include washing, wilting and drying. Biomethane potential (BMP) assays were carried out on the samples. Fresh Ulva has a biomethane yield of 183 L CH₄/kg VS. For dried, washed and macerated Ulva a BMP of 250 L CH₄/kg VS was achieved. The resource from the estuary in West Cork was shown to be sufficient to provide fuel to 264 cars on a year round basis. Mono-digestion of Ulva may be problematic; the C:N ratio is low and the sulphur content is high. In year 2 co-digestion trials with dairy slurry were carried out. These indicate a potential increase in biomethane output by 17% as compared to mono-digestion of Ulva and slurry.     

A comparative assessment of waste incinerators in the UK

The uptake in Europe of Energy from Waste (EfW) incinerator plants has increased rapidly in recent years. In the UK, 25 municipal waste incinerators with energy recovery are now in operation; however, their waste supply chains and business practices vary significantly. With over a hundred more plant developments being considered it is important to establish best business practices for ensuring efficient environmental and operational performance. By reviewing the 25 plants we identify four suitable case study plants to compare technologies (moving grate, fluidised bed and rotary kiln), plant economics and operations. Using data collected from annual reports and through interviews and site visits we provide recommendations for improving the supply chain for waste incinerators and highlight the current issues and challenges faced by the industry. We find that plants using moving grate have a high availability of 87–92%. However, compared to the fluidised bed and rotary kiln, quantities of bottom ash and emissions of hydrogen chloride and carbon monoxide are high. The uptake of integrated recycling practices, combined heat and power, and post incineration non-ferrous metal collections needs to be increased among EfW incinerators in the UK. We conclude that one of the major difficulties encountered by waste facilities is the appropriate selection of technology, capacity, site, waste suppliers and heat consumers. This study will be of particular value to EfW plant developers, government authorities and researchers working within the sector of waste management.     

Heat budget for a waste lift placed under freezing conditions at a landfill operated in a northern climate

A landfill operated in Ste. Sophie, Québec, Canada was instrumented to better understand the waste stabilization process in northern climates. Instrument bundles were placed within the waste to monitor temperature, settlement, oxygen, moisture content, total load, mounding of leachate and electrical conductivity. A finite element model was developed to simulate the heat budget for the first waste lift placed in the winter months and was calibrated using the first 10.5 months of collected temperature data. The calibrated model was then used to complete a sensitivity analysis for the various parameters that impact the heat budget. The results of the analysis indicated that the heat required for phase change to thaw the liquid fraction within frozen waste had a significant impact on the heat budget causing sections of waste to remain frozen throughout the simulation period. This was supported by the data collected to date at Ste. Sophie and by other researchers indicating that frozen waste placed during the winter months can remain frozen for periods in access of 1.5 years.     

Recycling and reuse of waste from electricity distribution networks as reinforcement agents in polymeric composites

Of the waste generated from electricity distribution networks, wooden posts treated with chromated copper arsenate (CCA) and ceramic insulators make up the majority of the materials for which no effective recycling scheme has been developed. This study aims to recycle and reuse this waste as reinforcement elements in polymer composites and hybrid composites, promoting an ecologically and economically viable alternative for the disposal of this waste. The CCA wooden posts were cut, crushed and recycled via acid leaching using 0.2 and 0.4 N H₂SO₄ in triplicate at 70 °C and then washed and dried. The ceramic insulators were fragmented in a hydraulic press and separated by particle size using a vibrating sieve. The composites were mixed in a twin-screw extruder and injected into the test specimens, which were subjected to physical, mechanical, thermal and morphological characterization. The results indicate that the acid treatment most effective for removing heavy metals in the wood utilizes 0.4 N H₂SO₄. However, the composites made from wood treated with 0.2 N H₂SO₄ exhibited the highest mechanical properties of the composites, whereas the use of a ceramic insulator produces composites with better thermal stability and impact strength. This study is part of the research and development project of ANEEL (Agência Nacional de Energia Elétrica) and funded by CPFL (Companhia Paulista de Força e Luz).     

Threats to intact tropical peatlands and opportunities for their conservation

Large, intact areas of tropical peatland are highly threatened at a global scale by the expansion of commercial agriculture and other forms of economic development. Conserving peatlands on a landscape scale, with their hydrology intact, is of international conservation importance to preserve their distinctive biodiversity and ecosystem services and maintain their resilience to future environmental change. We explored threats to and opportunities for conserving remaining intact tropical peatlands; thus, we excluded peatlands of Indonesia and Malaysia, where extensive deforestation, drainage, and conversion to plantations means conservation in this region can protect only small fragments of the original ecosystem. We focused on a case study, the Pastaza‐Marañón Foreland Basin (PMFB) in Peru, which is among the largest known intact tropical peatland landscapes in the world and is representative of peatland vulnerability. Maintenance of the hydrological conditions critical for carbon storage and ecosystem function of peatlands is, in the PMFB, primarily threatened by expansion of commercial agriculture linked to new transport infrastructure that is facilitating access to remote areas. There remain opportunities in the PMFB and elsewhere to develop alternative, more sustainable land‐use practices. Although some of the peatlands in the PMFB fall within existing legally protected areas, this protection does not include the most carbon‐dense (domed pole forest) areas. New carbon‐based conservation instruments (e.g., REDD+, Green Climate Fund), developing markets for sustainable peatland products, transferring land title to local communities, and expanding protected areas offer pathways to increased protection for intact tropical peatlands in Amazonia and elsewhere, such as those in New Guinea and Central Africa which remain, for the moment, broadly beyond the frontier of commercial development.     

A method for the assessment of light-induced oxidative stress in embryos of fucoid algae via confocal laserscan microscopy

A method was developed for measurement of active oxygen production in embryonic stages of the brown seaweed Fucus spiralis, using the label CM-DCFH-DA. Active oxygen species convert the label into the green fluorescent CM-DCF (exc/em 488/530 nm) that is detected via confocal laserscan microscopy and quantitative image analysis. Loading of the label did not harm the embryos; loading efficiency was age-independent, and the esterases needed for conversion to CM-DCFH were not inhibited by the effective UV dose (2 W m⁻²) applied in the experiments. After correction for daily variation of the laser power, and calibration with DCF standard solutions, this automated analysis of confocal images rendered active oxygen concentrations in fucoid embryos (μM DCF). An experiment was designed for the assessment of active oxygen production following irradiance stress in the light-sensitive embryos. Dim-light-acclimated, 1-, 2- and 4-day-old embryos were transferred for 60 min to defined high-light conditions (4π-irradiance 300 μmol photons m⁻² s⁻¹), optionally without UV radiation, including UVA, or including UVA plus UVB. PSII yield measurements (PAM fluorometer) were carried out in order to assess the degree of photoinhibition under these light conditions. The imposed light stress initially caused a rapid decrease of the PSII yields (Φ_P). With increasing embryo age, minimum Φ_P values attained under light stress remained higher. Consequently, electron transport rates (ETR) would increase with embryo age, i.e., with the development of their photosynthetic apparatus. Active oxygen production increased with ETR, and when UVB was included, relatively greater amounts of active oxygen were produced. A slow, second-phase decrease of Φ_P under light stress that was proportional to active oxygen production indicated that some photooxidative damage was caused, in particular during UVB exposure. Recovery from light stress was a rapid process in the absence of UVB; in such cases Φ_P was almost restored to the initial values within 60 min. The relative state of recovery of Φ_P was correlated with both the effective UV dose and active oxygen production rate (DCF). Recovery was slowest in embryos exposed for 60 min to an experimental UVB dose, which was representative of a situation at low tide, on a sunny day. The results suggest that active oxygen may cause an in situ inhibition of growth of the earliest life stages of F. spiralis. Received: 26 January 2000 / Accepted: 4 September 2000     

The response of sea scallop (Placopecten magellanicus) veligers to a weak thermocline in 9-m deep mesocosms

We examined the vertical distributions of scallop (Placopecten magellanicus) veligers in deep (0.6 m diameter, 9.5 m deep) polyethylene mesocosms from December 1991 to January 1992. In the mesocosms temperature stratification varied from 0 to 1.5 °C. Profiles of vertical distribution revealed several repeated patterns. Peaks in veliger numbers often appeared at the water surface and just above the thermocline. Higher density patches were seen below the surface peaks, and revealed the presence of bio-convective cells. Distribution away from these discontinuities was usually even. Distribution of veligers was affected by thermoclines above 1.0 °C. Responses to thermoclines varied with larval age and time of day, and 28 to 30 d veligers passed in both directions through a 1.5 °C thermocline. We conclude that larval behaviour is a major determinant of whether veligers pass through a thermocline. Kinematic viscosity may play a role in perception of temperature changes. Two potential consequences of such behaviour are (1) remaining in more productive upper water layers, where feeding opportunities are enhanced, and (2) increased horizontal transport in the region of the thermocline, which may enhance recruitment. Received: 15 May 1996 / Accepted: 11 May 2000     

Interactive effects of wave exposure and tidal height on population structure of the mussel Perna perna

The influence of wave exposure and of tidal height on mussel (Perna perna Linnaeus) population structure (size, density, biomass and adult/juvenile correlations) was examined at 18 sites along the south coast of South Africa. Sites were classified as exposed or sheltered prior to sampling, without reference to the biota, on the basis of aspect, topography and wave regime. A single set of samples was collected from each site during three spring tide cycles. Adult mussels on these shores almost always attach directly to the rocks, and layering of mussels is virtually absent. Shore height always had a strong influence on population structure, but exposure had significant effects only lower on the shore, and almost exclusively on mussel sizes. Principal component analysis (PCA), based on size distribution data for each population, revealed a general upshore decrease in the modal size of the adult cohort. The effects of exposure on size distribution, however, varied with tidal height. PCA separated exposed zones, with larger mussels, from sheltered zones on the low-shore. Farther upshore the two shore types were increasingly confounded. The maximum size of mussels showed a similar pattern, with significant differences (ANOVA, p < 0.05) between exposed and sheltered sites only on the low- and mid-shores. Density was calculated from randomly placed quadrats (i.e. not necessarily from areas of 100% cover) and showed a different pattern. Adult (>15 mm) densities decreased up the shore, with low-, mid- and high-shore zones being significantly different from one another (ANOVA, p < 0.0001; followed by multiple range tests). However, exposure had no significant effect on density, nor was there a significant interaction with zone. Recruit (<15 mm) densities were positively correlated with adult (>15 mm) densities in all zones and for both exposure regimes ( p < 0.05 in all cases), but there was considerable variability and extremely low predictability in these relationships (r ² generally <0.2). Predictability tended to be greater towards the high-shore, where adults were more clumped. As with density, biomass was not affected by exposure, but decreased upshore as mean size and density decreased. A reduction in the influence of exposure farther upshore may be caused by greater emersion overriding the effects of exposure. The presence of free space within mussel beds and significant correlations between recruit and adult densities suggest that these mussel populations are recruit limited. Received: 7 January 2000 / Accepted: 6 July 2000